Bids Are Invited For Almirah Steel Medium Half Haning Half Shelve As Per Drawing No Fd-1034 And All As Specified In Boq Specicication Documents , Chair Dining As Per Drawing No Fd-Map-Ii-05 And And All As Specified In Boq Specicication Documents , Cha, North 24 parganas-West Bengal

Bids Are Invited For Almirah steel medium half haning half shelve as per drawing No FD-1034 and all as specified in BOQ specicication documents , Chair dining as per drawing No FD-MAP-II-05 and and all as specified in BOQ specicication documents , Chair school with hand board as per drawing No FD-E6-MAP- 05 and all as specified in BOQ specicication documents , Chair Verandah as per drawing No FD-MAP-II-06 and all as specified in BOQ specicication documents , Dressing Mirror Gents as per drwaing No FD-E6-MAP-16 and all as specified in BOQ specicication documents , Rack Shoe Steel as per drawing No FD-E6-MAP-02 R and all as specified in BOQ specicication documents , Table Bed Side as per drwaing No FD-E6-MAP-15 R and all as specified in BOQ specicication documents , Table Dining 1200mmx900mm as per drawing No FD-MAP-II-03 and all as specified in BOQ specicication documents , Table Peg as per drawing No FD-384 and all as specified in BOQ specicication documents Almirah small (Steel) 1/2 Hanging 1/2 Shelving All as shown on drawing. Overall size shall be 765mm long, 440mm wide and 1270mm high. The base shall be made of two numbers mild steel channels shape with ends covered and welded to bottom of almirah. Mild steel sheet for channel base shall be 1mm thick. The base channel shall be welded at 50mm from each end of 765mm lenght. Top, sides, back bottom and front of almirah shall be of 1mm thick mild steel sheet. A partition in the centre of almirah shall be provided vertically with 1mm thick mild steel sheet. Three shelves, equally spaced, of 1mm thick mild steel sheet shall be provided in one half towards left hand side. One top shelf on right hand side shall be provided matchhing with top shelf shall be provided with 20mmdia chormium plated steel conduit pipe of wall thickness 1.25mm and shall have sockets at both ends. Front shutter shall have two leaves. A steel chromium plated handle 100mm long shall be provided to shutter. A three way locking device gloss French polish with lacquer finishch leaf of front shutter shall have two hinges of 75mm long butt hinged and shutters shall be side hung. All joints, welding and fixing shall be done in accordance with standard workmanship. Sll steel surfaces exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces. Total Quantity : 1269

Refer document

INR 90000.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB