|
| 1 | Purchaseing of Furniturfor WBSRDA, Jangipur Division |
| 2 | Providing, supplying and placing of Executive Table. Dimension of the table: 1800W x 2100D x 750H mm. Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product should have IAQ Gold, Greenpro, GRIHA 2019 and Greenguard (by UL) certification. |
| 3 | Providing, supplying and placing of Executive Chair (Normal). The product should have IAQ Gold, Greenpro, GRIHA 2019, Greenguard (by UL) and BIFMA Level-2 certification. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm. ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: 360\" revolving type. Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. Tilt tension adjustment can be operated in seating position. 5-position Tilt limiter giving option of variable tilt angle to the chair. Seat/back tilting ratio of 1: 2. The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair: Seat Height -43.1-53.1cmHeight -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. |
| 4 | Providing, supplying and placing of 5\" L-Shape Table for FO, AE & JE. The table size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board with PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU -3616 size shall be 1050 Widthx 450 Depthx 705 Height. The top ofFinesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. The OEM should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from NABCB/IAF recognized accreditation body), IGBC Platinum, AIOTA certification. |
| 5 | Providing, supplying and placing of Working Table L-Shape of size shall be 1200 Width x 600 Depthx 750 Height.The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT. The Modesty panel shall be in a combination of black & white cedar. Pedestal size shall be390 Width x435 Depthx529 Height.The top is 18 mm thick PLB . The two drawer mobile pedestal is available in one size .The top and drawer fronts shall be in white cedar while the other components shall be in black. The OEM should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from NABCB/IAF recognized accreditation body), IGBC Platinum, AIOTA certification. |
| 6 | Providing, supplying and placing of Chair (Rolling). The product should have Greenguard (by UL) certification. SEAT/BACK ASSEMBLY: The seat and back should bemade from 1.2 ±0.1 cm.. thk. hot pressed plywoodmethod described in.and upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should bedesigned with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D). The product should have Greenguard (by UL) certification. BACK SIZE: 39.0cm(W) x 47.0cm.(H). SEAT /BACK COVERS: The seat and back covers should beinjection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam should bemoulded with density = 4+/-21kg/m and hardness load 16_± 2 kgffor 25%_compression. ARMREST ASSEMBLY : The one-piece armrests should beinjection moulded from black Nylon. The armrests should befitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PERMANENT CONTACT mechanism: The permanent contact mechanism should bedesigned with the following features: 360° revolving type. 14° ±2°maximum-back-tilt-only. Upright position locking. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow should be.3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal should be62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in Black Nylon. Overall Dimensions of Chair: Seat Height - min 43.0 to max 54.0cm. Height - min86.1 to max 97.1cm. Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm. |
| 7 | Providing, supplying and placing of Visitor\"s Chair (Stand). SEAT/BACK ASSEMBLY: The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured and back should beinjection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should bedesigned with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D). BACK SIZE: 39.0cm(W) x 38.0cm.(H). SEAT / BACK COVERS: The seat and back covers should beinjection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. ARMREST ASSEMBLY : The armrests should bemade of black integral skin Polyurethane wtih 50-70 Shore \"A\" Hardness and reinforced with M.S. insert. The P.U. armrests should bethen fixed to black powder-coated ( OFT 40-60 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. FIXED TYPE mechanism: The fixed type mechanism should bewithout back tilt. TUBULAR FRAME: The tubular frame should bemade up of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns). Overall Dimensions of Chair: Seat Height -49.5cm. Height -88.5cm. Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm. The product should have Greenguard (by UL) certification. |
| 8 | Providing, supplying and placing of 10-Seater Conference Table of Dimension: 3000W x 1150D x 740H mm. Work top--Made of 25mm thick MDFone side prelaminate board conforming to IS14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Access panels provided with soft closing hinges. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management-Bottom cabinet with door is provided for flow of wires and cables. Cutout provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI,VGA-A,etc). The product should have Greenguard (by UL), IAQ, Greenpro and GRIHA-2019 certification. |
| 9 | Providing, supplying and placing of Sofa 3-Seater. SIDE FRAME ASSEMBLY: The side frame assembly should befitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should bemade of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated (DFT 40-60microns). The ends should befitted with ABS moulded end caps. TIE MEMBER: It should bethe connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should beused to connect the side frames. The tie-member should beof 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should bemounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgffor 25% compression of the foam. The complete moulded seat rest assembly should becovered with a replaceable fabric upholstery cover. SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T). BACKREST ASSEMBLY:The backrest assembly should beflexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgffor 25% compression of the foam. |
| 10 | Providing, supplying and placing of Steel Almirah which shall have an overall size of916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The product should have IAQ Gold, Greenpro, GRIHA, Greenguard (by UL) certification. |
| 11 | Supply, Fitting & Fixing of Open type Multiflex Rack as per the below-mentioned dimension.1. Height – 2400 mm2. Width- 1200 mm3. Depth- 448 mm4. No of Panels- 6 (Customised Item)The OEM should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from NABCB/IAF recognized accreditation body), IGBC Platinum, AIOTA certification. |
| 12 | Over Cabinet with metal shutter::Supplying and placing of Overhead storage unitProduct Size - The Overhead storage unit consist of 1nomain and5 nos Add-On unit type of construction.............the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. |
| 13 | Over Cabinet with metal shutterSupplying and placing of Overhead storage unitProduct Size - The Overhead storage unit consist of 1 no main and5 nos Add-On unit type of construction ............the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. : |
| 14 | Over Cabinet with metal shutter:Supplying and placing of Overhead storage unitProduct Size - The Overhead storage unit consist of 1 no main and20 nos Add-On unit type of construction ........... the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. |
| 15 | Metal Shelving Racks:Supplying and placing of Storage OPEN SHELFProduct Size - 5400(W) x 450(D) x 1950*(H) (Height of leveler is 50mm and adjustment possible should be ................the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. |
| 16 | cable Cubby With HDMI/USB Port:SITC Of Diagonal Size 85\",Panel Type 60Hz New Edge, Resolution 3,840 x 2,160 (Landscape),Brightness 350 (without glass), 220 (with glass), Contrast Ratio 4000:1 (Typ.),Viewing Angle(H/V) 178:178,Response Time 6 ms, Display Colors 16.7, Color Gamut 92%, Dynamic C/R Mega,Audio Built in Speaker(10W X4), Input Type HDMI 2(Rear 1, Front 1), DP 1, USB C(Front), OPS I/F, 2(For SoC, Rear/Front), 1 (for external 3.0x1(Front)), Output Type (Basic) Touch Out 1 (USB Upstream Type),(With Tray) Touch Out 1, No. of Drawing 20 touch (internal/external), * Whiteboarding app works 4 drawing, Drawing Speed(Touch Latency) 26ms, Duty Cycle 16/7, Special features AG Flim(Anti glare),Hydrophobic Coated PET (Shatter-proof flim)Antimicrobial Coating, Touch module(IR), , WiFi/BT Module Embedded, Built in Speaker(40W 4CH),External Control Touch Input,RS232C thru stereo jack, RJ45(For MDC). Safety CE, UL & BIS.Approved Make: NEC\SONY\Samsung |
| 17 | Mount For Display: SITC Of Mount for Display. |
| 18 | 4x2 4K/60 HDMI with 2 Audio Outputs:SITC Of 4 x 2HDMI Matrix Switcher with Audio De-embedding, as per specifications..4 x 2HDMI Matrix Switcher with Audio De-embedding which supports computer and video resolutions up to 4K/60 @ 4:4:4 , ............... parity, Defaults: 9600 baud, 8 data bits, 1 stop bit, no parity; should support Ethernet protocol : ARP, DHCP, DNS, HTTP, HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, Telnet, UDP/IPApproved Makes: Extron/ Dexon/ FSR |
| 19 | PTZ cameras:SITC of Full HD PTZ Camera, sensor 1/2.8\" 2.41MP CMOS, Video Format HDMI:1080p 60 / 50 fps,720p 60 / 50 fps,USB:1080p 30 / 25 fps, 720p 30 / 25 fps, Video Output (HD) Interface HDMI / USB 3.0, Optical Zoom 12x, Digital Zoom 12x (HDMI Only), Viewing Angle 72°(H) 80°(D), Panning Angle +100° ~ -100°,Panning Speed 100°/ sec,Tilting Angle +30° ~ -30°, Tilting Speed 100°/ sec,Aperture F1.6~F2.8,Focal Length f = 3.92 ~ 47.32 mm,Shutter Speed 1/1 ~ 1/10,000 sec, Minimum Object,Distance 500mm (Wide) ~ 1500mm (Tele),Video S/N Ratio > 50dB,Minimum Illumination 1.6 lux (F1.8, 50IRE, 60fps), Focus System Auto / Manual, Gain Control Auto / Manual, White Balance Auto / One-Push / Manual, Exposure Control Auto / Manual, WDR Yes, 3D NR Yes, Image Flip Yes, Preset Positions 128, Control Interface RS-232 In and Out / USB, Control Protocol VISCA / UVC, Video Stream YUV422 / MJPEG, IR Pass-through Yes, IR Receiver Yes, IR Remote Control Yes, Power Consumption < 13W.Approved Make: Lumens/Sony/Panasonic. |
| 20 | Wall/Ceilingmount for above camera:SITC Of Wall/Ceilingmount for above camera |
| 21 | Cable Cubby With HDMI/USB Port: SITC of Cable Cubby With HDMI/USB Port |
| 22 | HDMI Transmitter:SITC of HDMI transmitter transmitting HDMI plus control and analog audio up to 230 feet (70 meters) over twisted pair; supports computer and video resolutions up to 4K ; supports data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through ; HDCP 2.3 compliant; supports up to 4:4:4 chroma sampling; should support Maximum pixel clock 300 MHz; should support Audio Gain Unbalanced output: 0 dB; balanced output +6 dB, Frequency response 20 Hz to 20 kHz, ±0.5 dB , THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output , S/N >90 dB, at maximum output (15 dBu), balanced (unweighted) , Stereo channel separation >80 dB @ 1 kHz to 20 kHztput displays.Approved Makes: Extron/ Dexon/ FSR |
| 23 | Cable Cubby With HDMI/USB Port: SITC of twisted pair receiver which Receives HDMI plus control and analog audio up to 230 feet (70 meters) over twisted pair; Support computer and video resolutions up to 4K, data rates up to 10.2 Gbps or better and CEC pass-through; HDCP 2.3 compliant; EDID Management; Support up to 4:4:4 chroma sampling; should support Maximum pixel clock of at least 300 MHz; should support Audio Gain of Unbalanced output: 0 dB; balanced output +6 dB, Frequency response of 20 Hz to 20 kHz, ±0.5 dB, THD + Noise of 0.03% @ 20 Hz to 20 kHz at maximum output, S/N of >90 dB, at maximum output (15 dBu), balanced, Stereo channel separation : >80 dB @ 1 kHz to 20 kHz.Approved Makes: Extron/ Dexon/ FSR |
| 24 | HDMI and Audio to USB Scaling Bridge: SITC Of HDMI To USB Converter.Approved Make: Inogeni/Extron/FSR |
| 25 | HDMI Cable 25 Ft: SITC of HDMI Cable 25 Ft |
| 26 | HDMI patch cable: SITC of HDMI Patch Cable 6 Ft.Approved Make: Extron/Klotz/NT |
| 27 | USB cable-10 Mtr: SITC of USB Patch Cable 10 Meter.Approved Make: Extron/Klotz/NT |
| 28 | USB cable: SITC of USB Patch Cable 1.8 Meter.Approved Make: Extron/Klotz/NT |
| 29 | Wired Gooseneck Microphone with base: SITC Of 18\"Goosenecklengthwithdualflexdesign,Shouldoperatewithinthefrequencyrangeof30Hz-18kHz or better, ElementwithBackElectret-Condenser, Polar Pattern with Cardioid,LowfrequencyRoll-of with 180Hz,12dB/ octave,Impedancewith250Ω±30%(at1000Hz),OpenCircuitSensitivitywith-57dB±3dB (0dB=1V/microbar 1000Hzindicated by open circuit,Maximum Input Sound Level with 115dBSPL,1KHzat1%T.H.D.,Dynamic Range with82dB1KHzatMaxSPL,Signal-To-Noise Ratio with 61dB 1KHz at 1Pa, Operating Voltage with Phantom Power11–52VDC,2mAtypical,SwitchwithFlat,Roll-off 10dBpad(Nominal). Should be supplied with Base having ON/OFFSwitch etc. |
| 30 | Single Ch Wireless Microphone with Handhed wireless Microphone: SITC Of Wireless Handheld microphone with Built in AFS(Automatic Frequency Selection) technology, UHF operating mode with Frequency range of 522 -930Mhz, Should have operating bandwidth 134 MHz or better, Anti Interference technology ensures Noiselock Squelch effectively blocks Stray RF or better, Microphone Frequency Response of 45Hz to 18Khz or better, Should have Signal to noiseratio less then 104dB or better, RF output Power of 10/40mW or better, Should have maximum 24 set can be used simultaneously by using multiple frequency bands in one venue, Should have die cast metal body, Microphone element Dynamic or better complete etc. |
| 31 | DSP audio processor with Acoustic Echo Cancellation, AFC, AGC,8Ch GPIO& US: SITC Of Digital signal processor with min. 04AEC enabled Mic/Line inputs, 04 Line outputs or better , Input channel processing should include Pre amplifier, Signal generator, Expander, Compressor, 10 band Parametric EQ or better, Output Channel processing should include 31 band Graphic equalizer, Delay, Crossover, limiter or better, Other features should include Automatic mixing console,Ducker, Feedback elimination, Noise elimination, echo elimination or better, Should have built-in Bi directional USB for Software based VC as well as for playing digital audio, Should have built in Camera tracking Module, 8 Port Freely Configurable GPIO or better with Analog/Digital dynamic range of 114dB or better, Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz or better, per channel phantom power module or better. Should be configurable thru software. |
| 32 | Amplifier: SITC Of Amplifier having 4x150W @4ohm power or better, It should be 4 channel Class D Amplifier with Volume Knobs on each channel or better, W/Ch@8Ohm 90W or better, W/Ch@4Ohm 150W or better, W/Ch@2Ohm 230W or better, W Bridge @ 8Ohm 310W or better, W Bridge @ 4 Ohm 400W or better, Frequency range : 20Hz – 20kHz or better, THD + N <0.1% or better , S/R ratio >96dB or better, Gain 28dB or better , Input Sensitivity 2.21dBu or better, Should have the following Protections : Mute On/Off, DC, Internal fuse. |
| 33 | Wall Mount Speaker:SITC Of Wall Mount Loudspeaker having Low Impedance Power of min 40 W or better @ 8 Ohm, & 16W or better @70/100V. Nominal Impedance of 8 Ohm or better LF Transducer 5\" Woofer or better, HF Transducer 0.5\" Tweeter or better, should have Sensitivity (1W @ 1m) of 90 dB or better, SPL Max 106 dB or better with Frequency Range of 94Hz - 20 kHz or better. |
| 34 | Speaker Cable 14 AWG : SITC OfMulti-Conductor - High-Conductivity Copper Speaker Cable, Twisted Jacketed Connector, 14 AWG stranded (42x30) tinned copper conductors, PVC insulation, PVC jacket., Operating Temperature Range : -20°C To +90°C or better , NEC/(UL) Specification:CL3 or better , AWM Specification : UL Style 2587 (600 V 90°C) or better , CSA Specification : FAS90 or better, EU Directive 2011/65/EU (ROHS II) compliant or better, EU RoHS Compliance or better, Approved Makes : Belden , Klotz , Eurocable. |
| 35 | Microphone Cable: SITC Of Microphone Cable |
| 36 | Audio Sterio / Control Cable: SITC Of22 AWG stranded (7x30 ) Stereo Audio / Control cable or better ,High-conductivity tinned copper conductors or better , Polypropylene insulation or better , Should have PVC jacket, Operating Temperature Range: -20°C To +75°C or better , EU Directive 2011/65/EU (ROHS II) compliant or better ,Non Plenum , Approved Makes : Belden , Extron , Eurocable. |
| 37 | Shielded Cat6 cable: SITC OF Shielded twisted pair cable engineered for optimum signal transmission between devices transmitting and receiving signal over twisted pair; The cable is certified to 475 MHz bandwidth at distances up to 330 feet (100 meters) and has been independently tested and verified to meet performance requirements set by the HDBaseT Alliance; the cable should be engineered and tested to exceed HDMI error rate specifications of less than one pixel per billion at 100 meters; should provide protection from outside interference and ensures high quality signal transmission; should have SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield.Approved Makes:-,Extron,Christie, RGB. |
| 38 | XTP DTP 24 Plug, Package of 10: SITC OF Plug Should be provided with shielded twisted pair for devices transmitting and receiving signal over twisted pair; should be high performance Category 6A RJ-45 plug, metal strain relief and ground bonding,suitable for high EMI/RFI environments, should be compatible with TIA/EIA 568A/B wiring standards, Conductor alignment guide should reduce crosstalk and signal interference, should have Gold plated contacts. Approved Makes:-,Extron,Christie, RGB. |
| 39 | Standard AV rack with 600mm Width, 800 mm Outer Depth and 17U Height : SITC Of 12U AV Equipment Rack ,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,,Top cover ventilated on all sides along the width and depth thereby enhancing exhaust of hot air,Cable entry provision is both at the top and bottom covers with 35mm round cable entry point, the cable entry provision comprising of a gland plate with cable entry points in round cut outs edge protected with rubber grommets,Castor – 4 Nos. of heavy duty castors to take care of heavy load bearing capacities are provided, Earthing Strip – Copper strip to take care .OEM Authorization Format(Tender Specific) to be attached for authenticityof the grounding,Approved Make:NT/VALRACK/WQ |
| 40 | Delivery, Installation, Commissioning ,Programming , User Training,schematics charges: Delivery, Installation, Commissioning ,Programming , User Training,schematics charges |
