Purchase Of Equipment To Industrial Instruments Lab Refer Tender Documents. , Purchase Of Equipment To Industrial Instruments Lab , Pressure Measurement Using Bourdon Tubes This Trainer Setup Consists Of Bourdon Type Sensor, Lvdt Sensor, Power Supply, Signal Conditioner, Digital Indicator Etc Provided To Study The Characteristics Of Bourdon Tube. Bourdon Tube Of (0-5) Bar/ Kg/Cm2 Lvdt Sensor To Study The Displacement Of The Bourdon Tube, Regulated Power Supply Digital Indicator Provided To Display The Displacement (Or) Pressure, Foot Pump For Developing The Pressure Given To The Bourdon Tube Signal Conditioner For The Lvdt Sensor. , Thermistor Trainer It Requires Thermistor Temperature Sensor, Signal Conditioner For Thermistor Transducer Output 5-0 V. Digital Indicator For Temperature And Voltage, Heat Source, Thermometer And Self Speaking Title Card , Rtd Trainer It Requires Pt100 Type Rtd As Temperature Sensor Temperature Sensor, Signal Conditioner For Rtd Transducer Output 0-5V, Digital Indicator For Temperature And Voltage, Heat Source, Thermometer And Self Speaking Title Card , Thermocouple Trainer It Requires Thermocouple As Temperature Sensor Temperature Sensor, Signal Conditioner For Thermocouple Transducer Output 0-5V, Digital Indicator For Temperature And Voltage, Heat Source, Thermometer J, K And T Type Thermocouple Sensors And Self Speaking Title Card , Tachometer Noncontact Type, Range 10-50000 Rpm, Accuracy ± 0.5%, Lcd Display; Reflective Tape , Stroboscope (Speed Measurement Kit) Flashing Freq-150-1800Rpm, Appropriate Motor/Rotating Mechanism Should Also Be Supplied. , Angular Displacement Module It Requires Angular Transducer With Signal Conditioner Mounted In A Cabinet. Lcd Digital Indicators To Display The Position Of The Transducers. One Angular Displacement Transducer (Resistive Type), Test Points Are Provided To Measure The Output Of The Signal Conditioner. Built In Instrumentation Power Supply , Torque Measurement Trainer The Trainer Requires Torque Sensor, Signal Conditioner, Digital Indicator And Power Supply To Study The Characteristics Of Torque Sensor. Reaction Type Torque Transducer Is Used To Measure The Torque Of Range (0-9.81) Nm. With Fulcrum Arm.Slotted Weights With Pan Provision To Applied The Load In Steps Of 100 Gms., A Mechanical Holder To Hold The Sensor With The Table Rigidly, Digital Indicator To Display The Torque, Built-In Instrumentation Power Supply. , Venturi Meter Apparatus This Setup Consists Of A Rust Proof Water Reservoir, Pump, Transparent Collecting Or Measuring Tank With Graduated Scale To View The Water Level, Rotameter, Manual Operated Hand Valve, Venturi Tube, U Tube Manometer, Pipe Fittings Etc , Rotameter Calibration Test Rig This Setup Consists Of A Rust Proof Water Reservoir, Pump, Transparent Collecting Or Measuring Tank With Graduated Scale To View The Water Level, Rotameter, Manual Operated Hand Valve, Pipe Fittings Etc
