Tender For Maintenance And Repairs Of Mini Power Pumps In Bhavani Municipality., bhavani-Tamil Nadu

Tender For Maintenance And Repairs Of Mini Power Pumps In Bhavani Municipality. ; 1 Removal of Centrifugal pumpsetandits accessories for attending repairs etc., Completed. 2 Upto 3 HP 3 Above 3 HP to 7.50 HP 4 Removal of Submersible pumpsetsandits accessories from borewell / openwell for attending repair etc., Completed. 5 Upto 10HP 6 Re erection ofCentrifugal pumpsetandits accessories after attending the repair etc., Completed. 7 Upto 3 HP 8 Above 3 HP to 7.50 HP 9 Re erection ofSubmersible pumpsetsandits accessories into the borewell / openwell after attending the repair etc., Completed. 10 Upto 10 HP 11 Rewinding charges for the following wet type submersible motors using suitable gauge PVC insulated electrolyte copper wire of suitable no. of turns including deductthe cost of scrap ofold removing winding coiletc complete 12 1.5HP 13 3HP 14 5HP 15 10HP 16 Supply and Replacing of following worn out parts in the wet type submersible motors with new oneand monoblock motor including cost of materials and labour. including deduct the old material cost etc., completed. 17 motor thrust bearing for 5HP 18 motor housing bush for 5HP 19 Rotary surfacing 20 Pump housing 21 Pump Impellar 22 pump SS Bush 23 pump GM Bush 24 6305 bearing 25 motor thrust bearing for 1.5HP 26 Rotary surfacing for 1.5HP 27 Pump Deffucer 28 Brasshousing bush for 10HP motor 29 Thrust bearing set for 10HP motor 30 Impellar (SS) for 10HP pump 31 Bush(SS sleeve) for 10HP pump 32 Casing for 10HP pump 33 Supply and Fixing and jointing of following PVC Insulated and sheathed 3 core flat type copper cable conforming to IS 694/1990 etc Completed. 34 2.50 Sq mm 35 4.00 Sq mm 36 Supply and fixing of 63A porcelain fuse Unit (500V) 37 Supply and fixing of 100A porcelain fuse Unit (500V) 38 Supply and Replacing of following wornout Elecrtical meterialswith new one including cost of materials and labour charges etc., completed. 39 Contact set for 1.5HP 40 capacitor 41 Contact set for 5HP 42 Contact set for 3HP 43 Relay unit 44 single pole 6A to 32A,10KAMCB(240v/415v) 45 Double pole 6A to 32A,10KAMCB(240v/415v) 46 32 Amps DP Switch with metal clad(front handle) 47 32 Amps TPN metal clad swithchwith rewirable fuse units. 48 Panel board servicing 49 Bore well dummy plate 50 Bore well MS Clamp set 51 11/4 dia hose Adopter set 52 11/2 dia hose Adopter set 53 Nylon rope 54 Auto start Preventer unit (for 3 phase) 55 Timer switch 56 5 way connector (for single phase) 57 3 way connector (for 3phase) 58 Supply and deliveryof following GI Specials with ISI markincluding cost and conveyance of all materials etc., complete. 59 32mm dia G.I Union 60 21/2 C.I Flange 61 21/2 HDPE M.S.Collar 62 21/2 HDPE M.S.Connector 63 7 dia PVC coupler(6kg) 64 Removal of felldown Submersible motor from the deep borewell using special recovery vehicle including conveyance charges of vehicle and all labour charges etc., complete. 65 Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. 66 Supply and Fixing of DOL Starter with single phasing preventor with analog ammeter and voltmeter conforming to IS 13947 with auto restart facility including cost and conveyance of Materials at site and fixing labour charges etc., Completed. 67 Upto 5 HP 68 Flushing of borewell of 41/2 to 6 dia using drill rods/hose with required size of pipes for various capacity compressor including trasportation,labour,and fuel charges for compressors as directed by the departmental officer etc., complete. 69 Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu conductorof 1100 V gradeon 7/20 GI bearer wire for service connection mains.(SD 64) 70 Supply and run of 2 of 4 Sq.mm (56/0.3) PVC insulated SC unsheathed Cu conductorof 1100 Von 7/20 GI bearer wire for service connection mains.(SD 65) 71 Supply and run of 4 of 4 Sq.mm (56/03.) PVC insulated SC unsheathed Cu conductorof 1100 V grade on 7/20 GI bearer wire for service connection mains. 72 Supply and run of 2 x 4 Sq.mm (56/0.3) PVC insulated SC unsheathed cu conductor of 1100 V grade in 25 mm dia GI pipe (class B) suitably bent at both ends with necessary angle iron upright and end supports for mains (service pipe) 73 Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVCaccessories andthickTW switch box and 5A F.T.switch with painting of suitable colour for open PVC light point./Fan point (SD18) 74 Supply and fixing of single phase Submersible pumpset as per IS 8034/2002 without panal board (Duty lpm x m) 20x60 TWAD pg:100

Refer document

INR 5000.0 /-

INR 5 Lakhs /-