Tender For Sitc Ofhigh-Quality Modular 250W Led Sports Flood Light Fixture With A Nominal Efficiency 2110 Lpw. Cct Of 5700K With Sdcm Of < 5 And Cri290 ., Pimpri Chinchwad-Maharashtra

Tender For Sitc Ofhigh-Quality Modular 250W Led Sports Flood Light Fixture With A Nominal Efficiency 2110 Lpw. Cct Of 5700K With Sdcm Of < 5 And Cri290 The housing should be of Epoxy powder coated pressure die-cast aluminium housing (ADC12) in grey finish with Heat Resistant toughened clear glass cover to withstand extreme environments, Pre wired with external CG Box with Potted, IP 67 potted electronic LED driver with APFC (SMPS based constant current supply) with THD ≤ 10% with Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection and other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 complied .The floodlight shall be designed for operation in ambient temp -10℃ to + 50℃ with PF ≥ 0.95. Lifetime of 50K @L70. Product should be suitable for Operating voltage range - 100 - 300 V ac, continuous operation (10-12 Hrs. per day). The ingress protection should be minimum IP66 with an IK08. Optical compartments/external IP67 driver shall be maintenable/replaceable without impacting the LED Units. While accessing the gear compartment / external driver, the optical compartment should not be opened. The luminaire driver should have a 6KV onboard surge protection and an additional 10KV SPD duly bolted in the luminaire for extra safety. The wattage of each LED should be 1 -5 watt. Only high power single white LED chip with ceramic based suitable for outdoor use is allowed. Multichip, array multi die, mid power, integrated arrays and COBs are not permitted. High power LED used in the luminaire should be SMD type only of make Lumileds, Bridgelux, Osram, Nichia and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs ., should have an auto shutdown @325V and have an auto recovery feature. The drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The luminaire shall have suitable Narrow / Extra Narrow & Wide Beam peanut Lens suitable to arrange the required Lux Levels. Fixture should have 5 year on site fully comphrensive warrenty.fixture should be as per relevent BIS &EN standards. BIS logo with licen number should printed on product. SITC of High-quality modular 1000w LED Sports Flood Light Fixture with a nominal efficiency 2110 LPW. CCT of 5700K with SDCM of < 5 and CRI290 . The housing should be of Epoxy powder coated pressure die-cast aluminium housing (ADC12) in grey finish with Heat Resistant toughened clear glass cover to withstand extreme environments, Pre wired with external CG Box with Potted, IP 67 potted electronic LED driver with APFC (SMPS based constant current supply) with THD ≤ 10% with Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection and other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 complied . The floodlight shall be designed for operation in ambient temp -10℃ to + 50℃ with PF ≥ 0.95. Lifetime of 50K @L70. Product should be suitable for Operating voltage range - 100 - 300 V ac, continuous operation (10-12 Hrs. per day). The ingress protection should be minimum IP66 with an IK08. Optical compartments/external IP67 driver shall be maintenable/replaceable without impacting the LED Units. While accessing the gear compartment / external driver, the optical compartment should not be opened. The luminaire driver should have a 6KV onboard surge protection and an additional 10KV SPD duly bolted in the luminaire for extra safety. The wattage of each LED should be 1 -5 watt. Only high power single white LED chip with ceramic based suitable for outdoor use is allowed. Multi chip, array multi die, mid power, integrated arrays and COBs are not permitted. High power LED used in the luminaire should be SMD type only of make Lumileds, Bridgelux, Osram, Nichia and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs ., should have an auto shutdown @325V and have an auto recovery feature. The drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The luminaire shall have suitable Narrow / Extra Narrow & Wide Beam peanut Lens suitable to arrange the required Lux Levels. Fixture should have 5 year on site fully comphrensive warrenty.fixture should be as per relevent BIS &EN standards. BIS ogo with licen number should printed on product. SITC of 16 M high mast system with its accessories. Mast shaft shall be in two sections with 3mm and 4mm thickness, hot dip galvanised and suitable for wind velocity 39 m/s as per IS 875. Mast shall have top- 150mm, bottom- 460mm. It shall also include accessories for high mast including head frame, steel wire rope 6 mm dia (7/19 construction), trailing cable with plug & socket, double drum winch, galvanised lantern carriage arrangement suitable for 12 luminaires of 1kW asymmetrically & its control gear boxes and lightning finial. Mast should have asymmetrical lantern carriage with 4x3 array. There should be counter weight to balance the fitting weight which are also galvanised. The mast shall have an integral power too installed inside the base compartment and Rasing and lowering the gear box with sutiable motor with control box. 2) Supply of suitable foundation bolts manufactured from EN8 grade special steel along with nuts, washers, anchor plates and templates. 3) Supply of 63 Amp single dial control panel/ feeder pillar 4) Supply of Single dome LED type aviation obstruction lamp 1. ALL DIMENSION ARE IN MM. 2. DESIGN STANDARD : ILE TECHNICAL REPORT - 7 3. MATERIALS : 3.1 SHAFT : S350 AS PER BSEN 10025 3.2 DOOR & FLANGE : AS PER IS : 2062. 4. FINISH : 4.1 HOT DIP GALVANIZED TO BSEN 1461. 5. MAX. WIND SPEED : 39 M/SEC. AS PER IS : 875 6. WELDING : SUBMERGED ARC WELDING FOR SHAFT. 7. FOUNDATION BOLTS SHALL BE OF 5.8 GRADE CONFIRMING TO IS 1367 PART III. Providing Foundation casting for 16 mtr high mast with all tools and tackles, shuttering and masonary work as per specification.(SBC considered 10T.sqmtr@1.5mtr depth as per the shared foundation drawing

Refer document

Refer document

Refer document