Thirumanimangalam Devaswomin Aranmula Group - Repairs and replacement of existing old and damaged electrical installation to the various places of Temple Premises .New street lights install to the Sarpa Kavu - Reg.- 1 Dismantling and removing the existing damaged electrical installations and stacking carefully- Wireman 2 Wireman Helper 3 Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20mm with specials conforming to IS 9537 Part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00Sq.mm FRLS PVC insulated stranded single core copper conductor cable 650V grade including providing switch board main and continuous earthing with No.14 SWG bare copper, required quantity of copper earth socket, brass bolt and nut crimping / soldering etc. complete with suitable size modular type metal switch boxes, modular type front plates (white), etc. up to and including 6A modular type SP switches and making good the surface of wall colour washing, etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts, etc. as required (ROHS complaint modular accessories).Single control light point with 6A,plate ceiling rose – short point. 4 Single control light point with 6A 3 plate ceiling rose – long point. 5 Single control light point with 6Aplate ceiling rose – medium point 6 Supplying and fixing following size/ modules GI box along with modular base cover plate for modular switches in recess, etc. as required.3 Module (100mmx75mm) 7 12 Module (200mmx150mm) 8 6 Module (200mmx75mm) 9 Supplying and fixing following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate, etc. as required. 5/6 Amp switch 10 15/16 Amp switch 11 3 Pin 5/6 Amp socket outlet 12 6 Pin 15/16 Amp socket outlet 13 Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required. 14 Supplying and fixing 3 pin 5 Amps ceiling rose on the existing junction box / wooden block including connection, etc. as required. 15 Supply and fixing 200mm plastic sill shade to the existing joint. 16 Supply and fixing 9W LED normal size bulb to the existing points. 17 Supply and fixing 12W LED normal size bulb to the existing points. 18 Supply and fixing 50W LED large size bulb to the existing points. 19 Supplying and fixing PVC batten / angle holder including connection as required. 20 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.20mm 21 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 X 1.5 sq.mm 22 3 x 2.5 sq. mm 23 Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps, etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire confirming to relevant ISS and giving connections as required. 1200mm 1x20W LED lamp with box type fixture. 24 Supply, conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make Crec / Lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply. Driver compartment should be separately accessible for maintenance (LM 79 & 80 certificate from NABL accredited third party lab to be produced mentioning chip manufacturer) 25 Supply, conveyance, installation, testing and commissioning of 70W LED street light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make erec / lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply, Driver compartment, should be separately accessible for maintenance (LM 79 & 80 certificates from NABL accredited third party lab to be produced mentioning chip manufacturer) 26 Supply, conveyance, installation, testing and commissioning of 40W LED flood light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make erec / lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply, Driver compartment, should be separately accessible for maintenance (LM 79 & 80 certificates from NABL accredited third party lab to be produced mentioning chip manufacturer) 27 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing, etc. as required.32mm dia with HG company fabricated clamps. 28 Supply and laying of DWC pipe in ordinary soil 0.75m below ground level including excavation. 50/38mm or nearest size 29 Supply and laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1kv grade of the following size in the existing RCC / HUME / STONE / WARE / GI / DWC pipe as required. 2 core 4 Sq.mm 30 Supply, laying and clamping of the PVC insulated and PVC sheathed armoured aluminium power cable 1.1kv grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages, colour washing, etc. as required. 2 Core 6Sq.mm with factory made clamp. 31 Suppling and making end termination with brass compression gland and aluminium lugs for followings size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kv grade as required.2x6Sq.mm (19mm) 32 Supply and drawing bare earthing conductors of the following sizes along with wiring / cables and giving connection as required.2.65mm copper conductor (12 SWG) 33 Supply and fixing 5A rating 240/415V, C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning, etc. as required. Single pole 34 Supplying and fixing following rating, double pole 240V isolator in the existing MCB DB complete with connections, testing and commissioning, etc. as required. 40 Amps 35 Supplying and fixing following rating, double pole (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current up to 30mA in the existing MCB DB complete with connections, testing and commissioning, etc. as required.40A 36 Supply and providing PVC cable entry box / junction box having size of 24x19x11 cm with hinged front door construction consisting with channel suitable for fixing 4 pole isolator and 16A 2 way neutral link, etc. entire box fixing on the existing lamp pole with suitable clamp, nut and bolt, etc. as required. (SINTEX GSJB 2014) 37 Supply, conveyance and erection of the following sizes of B class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. (Pole- 5m * 1 no)50 mm dia GI pipe 38 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre 39 Supply and drawing the following sizes of multi-core PVC insulated and FRLS PVC sheathed 650/1100V grade copper conductor round flexible cables conforming to IS 694 Part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 3 Core 0.75Sq.mm 40 Earthing with 40mm dia GI pipe 1 m length in an earth pit size of 30 cm x 50 cm x 100cm and refilling using earhing compound complete as per standard specification. 41 APPENDIX - 2 - KadamanittaDevaswom in AranmulaGroup - Repair and replacement of the existing old and damaged electrical installation to the,Anakkottil,Office,Nalambalam and Sivannada- reg. 42 Dismantling and removing the existing old and damaged electrical installations and stacking carefully. - Labour Engaged- Wireman 43 Wireman Helper 44 Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20mm with specials conforming to IS 9537 Part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00Sq.mm FRLS PVC insulated stranded single core copper conductor cable 650V grade including providing switch board main and continuous earthing with No.14 SWG bare copper, required quantity of copper earth socket, brass bolt and nut crimping / soldering etc. complete with suitable size modular type metal switch boxes, modular type front plates (white), etc. up to and including 6A modular type SP switches and making good the surface of wall colour washing, etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts, etc. as required (ROHS complaint modular accessories). Single control light point with 6A, plate ceiling rose – short point. 45 Single control light point without 6A,plate ceiling rose – short point. 46 Single control light point with 6A 3 plate ceiling rose – medium point 47 Single control light point with 6A 3 plate ceiling rose – long point. 48 Supplying and fixing following size/ modules GI box along with modular base cover plate for modular switches in recess, etc. as required. 4 Module (125mmx75mm) 49 8 Module (125mmx125mm) 50 Supplying and fixing following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate, etc. as required. 5/6 Amp switch 51 15/16 Amp switch 52 3 Pin 5/6 Amp socket outlet 53 6 Pin 15/16 Amp socket outlet 54 Supplying and fixing 3 pin 5 Amps ceiling rose on the existing junction box / wooden block including connection, etc. as required. 55 Supply and fixing 200mm plastic sill shade to the existing joint. 56 Supply and fixing 9W LED normal size bulb to the existing points. 57 Supply and fixing 12W LED normal size bulb to the existing points. 58 Supply and fixing 50W LED large size bulb to the existing points. 59 Supplying and fixing PVC batten / angle holder including connection as required. 60 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.20mm 61 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm 62 Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps, etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire confirming to relevant ISS and giving connections as required. 1200mm 1x20W LED lamp with box type fixture. 63 Supply, conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make Crec / Lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply. Driver compartment should be separately accessible for maintenance (LM 79 & 80 certificate from NABL accredited third party lab to be produced mentioning chip manufacturer) 64 Supply, conveyance, installation, testing and commissioning of 70W LED street light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make erec / lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply, Driver compartment, should be separately accessible for maintenance (LM 79 & 80 certificates from NABL accredited third party lab to be produced mentioning chip manufacturer) 65 Supplying and fixing following piano type switch / socket on the existingBswitch box/ cover including connections etc. as required.5/6 amps switch 66 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing, etc. as required. (But without MCB / RCCB / Isolator)12 Way Double Door 67 Supply and fixing 5A rating 240/415V, C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning, etc. as required. Single pole 68 Supplying and fixing following rating, double pole 240V isolator in the existing MCB DB complete with connections, testing and commissioning, etc. as required 40 Amps 69 Supplying and fixing following rating, double pole (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current up to 30mA in the existing MCB DB complete with connections, testing and commissioning, etc. as required. 40A 70 Supply, conveyance and erection of the following sizes of B class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. (Pole- 5 m * 1 no)50 mm dia GI pipe 71 Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) brackets for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 72 Erection of metallic pole of following length in cement concrete 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre
