Purchasing of Furniture and Video Conference related equipments for RRNMU, Jalpaiguri- 1 Purchaseing of Furnitur Video Conference related equipments for RRNMU, Jalpaiguri 2 Executive Table with Eru: Supplying and placing in position Main Table of the following specifications.3000 x 1050 x 740 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. A e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 3 Back unit : Supplying and placing in position Back unit Body of the following specifications.2400 x 470 x 1226 CONSTRUCTION AND MATERIAL:Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 4 Centre Table: Supplying and placing ofcoffee table: Dimensions W x H X D (cm) - 90 x 40 x 90 Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 5 Visitor Chair: Providing, supplying and placing of Visitor Chair. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 6 Corner Table: Providing, supplying and placing ofCorner Table: Overall Size : Width : 60cm Depth : 60cm Height : 45cmTABLE METERIALS & SIZE :TOP:Sheesham 18 mm LEGS: 80X80 Top Side 40X40 Bottom Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 7 Executive Office Table: Supplying and placing in position Main Table of the following specifications.2400 x 900 x 740 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer.............the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 8 Back unit :Supplying and placing in position Back unit Body of the following specifications.2400 x 470 x 1950 CONSTRUCTION AND MATERIAL:Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottompanel(0.5mm CRCA for 600W and 0.8mm CRCA for 1200W), Back panel(0.5mm CRCA),Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 9 Wardrobe:Supplying and placing of storage unit whith Pre coated Dark wood Overall Size : (W x D x H) : For 500W Main Unit: 49.8cm x 2cm x 197.8cm and one addon unit of 400 cm Wx 2cm D x 197.8 cm H Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 10 Computer Table: Supplying and placing in position office Table of the following specifications. Its size shall be1200 x 600 x 750.TABLE MATERIAL - The Table Panels are made from 18 ±0.5mm thk Pre-LaminatedExterior grade PLT ( Grade I,Type-II )(IS 12823) with PVC edgebanding on all sides............. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 11 Over Cabinet with metal shutter: Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1no main and4 nos Add-On unit type of construction with ..............the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 12 Over Cabinet with metal shutter:: Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1nomain and5 nos Add-On unit type of construction.............the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 13 Over Cabinet with metal shutter Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1 no main and5 nos Add-On unit type of construction the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. : 14 Over Cabinet with metal shutter: Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1 no main and20 nos Add-On unit type of construction the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 15 Metal Shelving Racks:Supplying and placing of Storage OPEN SHELF Product Size - 5400(W) x 450(D) x 1950*(H) (Height of leveler is 50mm and adjustment possible should be the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. 16 cable Cubby With HDMI/USB Port:SITC Of Diagonal Size 85,Panel Type 60Hz New Edge, Resolution 3,840 x 2,160 (Landscape) ,Brightness 350 (without glass), 220 (with glass), Contrast Ratio 4000:1 (Typ.), Viewing Angle(H/V) 178:178,Response Time 6 ms, Display Colors 16.7, Color Gamut 92%, Dynamic C/R Mega,Audio Built in Speaker(10W X4), Input Type HDMI 2(Rear 1, Front 1), DP 1, USB C(Front), OPS I/F, 2(For SoC, Rear/Front), 1 (for external 3.0x1(Front)), Output Type (Basic) Touch Out 1 (USB Upstream Type),(With Tray) Touch Out 1, No. of Drawing 20 touch (internal/external), * Whiteboarding app works 4 drawing, Drawing Speed(Touch Latency) 26ms, Duty Cycle 16/7, Special features AG Flim(Anti glare),Hydrophobic Coated PET (Shatter-proof flim) Antimicrobial Coating, Touch module(IR), , WiFi/BT Module Embedded, Built in Speaker(40W 4CH),External Control Touch Input,RS232C thru stereo jack, RJ45(For MDC). Safety CE, UL & BIS.Approved Make: NECSONYSamsung 17 Mount For Display: SITC Of Mount for Display. 18 4x2 4K/60 HDMI with 2 Audio Outputs:SITC Of 4 x 2HDMI Matrix Switcher with Audio De-embedding, as per specifications..4 x 2HDMI Matrix Switcher with Audio De-embedding which supports computer and video resolutions up to 4K/60 @ 4:4:4 , ............... parity, Defaults: 9600 baud, 8 data bits, 1 stop bit, no parity; should support Ethernet protocol : ARP, DHCP, DNS, HTTP, HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, Telnet, UDP/IP Approved Makes: Extron/ Dexon/ FSR 19 PTZ cameras:SITC of Full HD PTZ Camera, sensor 1/2.8 2.41MP CMOS, Video Format HDMI:1080p 60 / 50 fps,720p 60 / 50 fps,USB:1080p 30 / 25 fps, 720p 30 / 25 fps, Video Output (HD) Interface HDMI / USB 3.0, Optical Zoom 12x, Digital Zoom 12x (HDMI Only), Viewing Angle 72°(H) 80°(D), Panning Angle +100° ~ -100°,Panning Speed 100°/ sec,Tilting Angle +30° ~ -30°, Tilting Speed 100°/ sec,Aperture F1.6~F2.8,Focal Length f = 3.92 ~ 47.32 mm,Shutter Speed 1/1 ~ 1/10,000 sec, Minimum Object,Distance 500mm (Wide) ~ 1500mm (Tele),Video S/N Ratio > 50dB,Minimum Illumination 1.6 lux (F1.8, 50IRE, 60fps), Focus System Auto / Manual, Gain Control Auto / Manual, White Balance Auto / One-Push / Manual, Exposure Control Auto / Manual, WDR Yes, 3D NR Yes, Image Flip Yes, Preset Positions 128, Control Interface RS-232 In and Out / USB, Control Protocol VISCA / UVC, Video Stream YUV422 / MJPEG, IR Pass-through Yes, IR Receiver Yes, IR Remote Control Yes, Power Consumption < 13W.Approved Make: Lumens/Sony/Panasonic. 20 Wall/Ceilingmount for above camera: SITC Of Wall/Ceilingmount for above camera 21 Cable Cubby With HDMI/USB Port: SITC of Cable Cubby With HDMI/USB Port 22 HDMI Transmitter:SITC of HDMI transmitter transmitting HDMI plus control and analog audio up to 230 feet (70 meters) over twisted pair; supports computer and video resolutions up to 4K ; supports data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through ; HDCP 2.3 compliant; supports up to 4:4:4 chroma sampling; should support Maximum pixel clock 300 MHz; should support Audio Gain Unbalanced output: 0 dB; balanced output +6 dB, Frequency response 20 Hz to 20 kHz, ±0.5 dB , THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output , S/N >90 dB, at maximum output (15 dBu), balanced (unweighted) , Stereo channel separation >80 dB @ 1 kHz to 20 kHztput displays.Approved Makes: Extron/ Dexon/ FSR 23 Cable Cubby With HDMI/USB Port: SITC of twisted pair receiver which Receives HDMI plus control and analog audio up to 230 feet (70 meters) over twisted pair; Support computer and video resolutions up to 4K, data rates up to 10.2 Gbps or better and CEC pass-through; HDCP 2.3 compliant; EDID Management; Support up to 4:4:4 chroma sampling; should support Maximum pixel clock of at least 300 MHz; should support Audio Gain of Unbalanced output: 0 dB; balanced output +6 dB, Frequency response of 20 Hz to 20 kHz, ±0.5 dB, THD + Noise of 0.03% @ 20 Hz to 20 kHz at maximum output, S/N of >90 dB, at maximum output (15 dBu), balanced, Stereo channel separation : >80 dB @ 1 kHz to 20 kHz.Approved Makes: Extron/ Dexon/ FSR 24 HDMI and Audio to USB Scaling Bridge: SITC Of HDMI To USB Converter.Approved Make: Inogeni/Extron/FSR 25 HDMI Cable 25 Ft: SITC of HDMI Cable 25 Ft 26 HDMI patch cable: SITC of HDMI Patch Cable 6 Ft.Approved Make: Extron/Klotz/NT 27 USB cable-10 Mtr: SITC of USB Patch Cable 10 Meter.Approved Make: Extron/Klotz/NT 28 USB cable: SITC of USB Patch Cable 1.8 Meter.Approved Make: Extron/Klotz/NT 29 Wired Gooseneck Microphone with base: SITC Of 18Goosenecklengthwithdualflexdesign,Shouldoperatewithinthefrequencyrangeof30Hz-18kHz or better, ElementwithBackElectret-Condenser, Polar Pattern with Cardioid,LowfrequencyRoll-of with 180Hz,12dB/ octave,Impedancewith250Ω±30%(at1000Hz),OpenCircuitSensitivitywith-57dB±3dB (0dB=1V/microbar 1000Hz indicated by open circuit,Maximum Input Sound Level with 115dBSPL,1KHzat1%T.H.D.,Dynamic Range with82dB1KHzatMaxSPL,Signal-To-Noise Ratio with 61dB 1KHz at 1Pa, Operating Voltage with Phantom Power11–52VDC,2mAtypical,SwitchwithFlat,Roll-off 10dB pad(Nominal). Should be supplied with Base having ON/OFFSwitch etc. 30 Single Ch Wireless Microphone with Handhed wireless Microphone: SITC Of Wireless Handheld microphone with Built in AFS(Automatic Frequency Selection) technology, UHF operating mode with Frequency range of 522 -930Mhz, Should have operating bandwidth 134 MHz or better, Anti Interference technology ensures Noiselock Squelch effectively blocks Stray RF or better, Microphone Frequency Response of 45Hz to 18Khz or better, Should have Signal to noise ratio less then 104dB or better, RF output Power of 10/40mW or better, Should have maximum 24 set can be used simultaneously by using multiple frequency bands in one venue, Should have die cast metal body, Microphone element Dynamic or better complete etc. 31 DSP audio processor with Acoustic Echo Cancellation, AFC, AGC,8Ch GPIO& US: SITC Of Digital signal processor with min. 04AEC enabled Mic/Line inputs, 04 Line outputs or better , Input channel processing should include Pre amplifier, Signal generator, Expander, Compressor, 10 band Parametric EQ or better, Output Channel processing should include 31 band Graphic equalizer, Delay, Crossover, limiter or better, Other features should include Automatic mixing console, Ducker, Feedback elimination, Noise elimination, echo elimination or better, Should have built-in Bi directional USB for Software based VC as well as for playing digital audio, Should have built in Camera tracking Module, 8 Port Freely Configurable GPIO or better with Analog/Digital dynamic range of 114dB or better, Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz or better, per channel phantom power module or better. Should be configurable thru software. 32 Amplifier: SITC Of Amplifier having 4x150W @4ohm power or better, It should be 4 channel Class D Amplifier with Volume Knobs on each channel or better, W/Ch@8Ohm 90W or better, W/Ch@4Ohm 150W or better, W/Ch@2Ohm 230W or better, W Bridge @ 8Ohm 310W or better, W Bridge @ 4 Ohm 400W or better, Frequency range : 20Hz – 20kHz or better, THD + N <0.1% or better , S/R ratio >96dB or better, Gain 28dB or better , Input Sensitivity 2.21dBu or better, Should have the following Protections : Mute On/Off, DC, Internal fuse. 33 Wall Mount Speaker:SITC Of Wall Mount Loudspeaker having Low Impedance Power of min 40 W or better @ 8 Ohm, & 16W or better @70/100V. Nominal Impedance of 8 Ohm or better LF Transducer 5 Woofer or better, HF Transducer 0.5 Tweeter or better, should have Sensitivity (1W @ 1m) of 90 dB or better, SPL Max 106 dB or better with Frequency Range of 94Hz - 20 kHz or better. 34 Speaker Cable 14 AWG : SITC OfMulti-Conductor - High-Conductivity Copper Speaker Cable, Twisted Jacketed Connector, 14 AWG stranded (42x30) tinned copper conductors, PVC insulation, PVC jacket., Operating Temperature Range : -20°C To +90°C or better , NEC/(UL) Specification:CL3 or better , AWM Specification : UL Style 2587 (600 V 90°C) or better , CSA Specification : FAS90 or better, EU Directive 2011/65/EU (ROHS II) compliant or better, EU RoHS Compliance or better, Approved Makes : Belden , Klotz , Eurocable. 35 Microphone Cable: SITC Of Microphone Cable 36 Audio Sterio / Control Cable: SITC Of22 AWG stranded (7x30 ) Stereo Audio / Control cable or better ,High-conductivity tinned copper conductors or better , Polypropylene insulation or better , Should have PVC jacket, Operating Temperature Range: -20°C To +75°C or better , EU Directive 2011/65/EU (ROHS II) compliant or better ,Non Plenum , Approved Makes : Belden , Extron , Eurocable. 37 Shielded Cat6 cable: SITC OF Shielded twisted pair cable engineered for optimum signal transmission between devices transmitting and receiving signal over twisted pair; The cable is certified to 475 MHz bandwidth at distances up to 330 feet (100 meters) and has been independently tested and verified to meet performance requirements set by the HDBaseT Alliance; the cable should be engineered and tested to exceed HDMI error rate specifications of less than one pixel per billion at 100 meters; should provide protection from outside interference and ensures high quality signal transmission; should have SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield.Approved Makes:-,Extron,Christie, RGB. 38 XTP DTP 24 Plug, Package of 10: SITC OF Plug Should be provided with shielded twisted pair for devices transmitting and receiving signal over twisted pair; should be high performance Category 6A RJ-45 plug, metal strain relief and ground bonding,suitable for high EMI/RFI environments, should be compatible with TIA/EIA 568A/B wiring standards, Conductor alignment guide should reduce crosstalk and signal interference, should have Gold plated contacts. Approved Makes:-,Extron,Christie, RGB. 39 Standard AV rack with 600mm Width, 800 mm Outer Depth and 17U Height : SITC Of 12U AV Equipment Rack ,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength,,Top cover ventilated on all sides along the width and depth thereby enhancing exhaust of hot air,Cable entry provision is both at the top and bottom covers with 35mm round cable entry point, the cable entry provision comprising of a gland plate with cable entry points in round cut outs edge protected with rubber grommets,Castor – 4 Nos. of heavy duty castors to take care of heavy load bearing capacities are provided, Earthing Strip – Copper strip to take care .OEM Authorization Format(Tender Specific) to be attached for authenticityof the grounding,Approved Make:NT/VALRACK/WQ 40 Delivery, Installation, Commissioning ,Programming , User Training,schematics charges: Delivery, Installation, Commissioning ,Programming , User Training,schematics charges
