Tender For Mini Mcf Purchase, Alappuzha-Kerala

Mini Mcf Purchase Mini Mcf For Collecting Plastic Waste.Estimate Has Been Uploaded In The Tender Site , Mini Mcf , Foot Bridge-Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:2:4 (Cement : 2 Coarse Sand (Zone-Iii) : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Providing And Fixing Precoated Glavanished Iron Profile Sheet 0.35 Mm (Size, Shape And Pitch Ofcorrugation As Approved By Engineer-In-Charge) , Total Coatedthickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side. Of The Sheet And Polyester Top Coat 15-18 Microns.Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratchesduring Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desiredby Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Screws Ofsize (5.5X55mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Orcurved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting Tosize And Shape Wherever Required , Extra For Providing And Fixing Expanded Metal Mesh Of Size 20X60 Mm And Strands 3.25 Mm Wide 1.6 Mm Thick Weighing 3.64 Kg Per Sqm For Encasing Or Rolled Steel Sections In Beams, Columns And Grillages Excluding Cost Of Hangers. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work

INR 2000 /-

INR 32500.0 /-

INR 13 Lakhs /-