}

Tender For Special Repair To Mafi Ring At Af Station Bareilly. (Job No.15W/Sr (E&M)/07/2024-25), bareilly-Uttar Pradesh

Statutory Bodies & Commissions/Committees has published Tender For Special Repair To Mafi Ring At Af Station Bareilly. (Job No.15W/Sr (E&M)/07/2024-25). Submission Date for this Tender is 03-02-2025. Conductor Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

47087351
Tender For Special Repair To Mafi Ring At Af Station Bareilly. (Job No.15W/Sr (E&M)/07/2024-25)
Open Tender
Indian
Uttar Pradesh
Bareilly
03-02-2025

Tender Documents

Tender Details

Tender For Special Repair To Mafi Ring At Af Station Bareilly. (Job No.15W/Sr (E&M)/07/2024-25); 1 Supply and laying or fixing jointing and testing 11 KV (E) system XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables IS-7098 with aluminium conductor, 11000 Volts ( earthed),laid under floor/groundor fixed onwall complete of cable size 95 Sqmm 3 core complete all as specified and directed. 2 M&Lcable jointing kit for 11 KV (E) grade cable for straight throughcold shrink type complete with jointing material and accessories suitable forXLPE armoured aluminium conductor cable of size 95 sqmm3 core complete all as specified and directed. 3 M&Lfor cable jointing kit for 11 KV (E) grade cable for indoor end termination cold shrink type complete with jointing material and accessories suitable forXLPE armoured aluminium conductor cable of size 95 sqmm3 core complete all as specified and directed. 4 M&Lcable jointing kit for 11 KV (E) grade cable for out door end termination cold shrink type complete with jointing material and accessories suitable forXLPE armoured aluminium conductor cable of size 95 sqmm3 core complete all as specified and directed. 5 Labour including necessary T&P required for Boring of holes under road, pavement, hard standing, blast wall without damaging the surface of road (minimum 1.00 meter below the road surface) for passing underground cable through GI pipe, complete all as specified and directed. (Note- GI pipe shall be measured & paid under respective BOQ item) 6 M&L Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including 150 mm bore HDPE pipesuitable for 0.40 Mpa working pressure, complete all as specified and directed.. 7 M&L for detection of pin point fault in HT cable 33/11 KV (burried in ground/under road/path up to depth of 1.5 m) by cable fault locating machine comprising impulse generator,acoustic fault locator and reflectometer (laptop based) complete all as specified and as directed. Notes-(i) Cable fault locating machine to be arranged at site with in 12 hrs after intimation.(ii) Earth work will be included in quoted rate.(iii) Cost of transpotation in unit rate is deemed to be included. 8 Taking out of existing HT UG cable of size 3 core, 95 sq.mm including taking out protection bricks complete all as specified and directed. 9 Excavation intrenches in any type of soil not exceeding 1.5 mtrdeep and not exceeding 1.5 mtrwide for laying of cables, RCC poles/stays and struts etc or /getting outcable cover and stacking for reuse/ credit , trimming sides and forming bottom surface all as specified and directed at site. 10 Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soilcomplete all as specified and directed. 11 Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and directed. 12 M&L for dry sand cushioning to underground cables with 8 CM thick before laying of cable and 15 cm thick after laying and stretching of cablecomplete all as specified and directed.Note : Only punned thickness i.e. 18 CM shall be measured and paid. 13 Supplying and Laying unreinforced precast concrete cable cover as per IS-5820 : 1970 with average breaking load for unreinforced covers as 300 Kg class HV, Type-I flat size 300 mm x 180 mm x 40 mm for Cable Protection of 11 KV Cables. 14 Laying only old serviceable cable cover ontained from item No 8 above, complete all as specified and directed. 15 M&L for precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) route Indicator suitable for mounting on route of HT/LT cable of size 45cm (width)x10cm (deep)x 100cm overall height, embedded to the depth not less than 45cm below ground level at a destance 50 mtr, complete all as specified & directed. 16 S&F light grade galvanized iron pipe 80 mm bore confirming to IS : 1239 and ISI marked with all fittings fixed on walls/poles/crossing of road etc for protection of cable complete all as specified and directed.

Key Value

Document Fees
INR 1000 /-
EMD
INR 122500.0 /-
Tender Value
INR 65 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Notice 0 KB
Click here to download tender document Tender Document 0 KB
Click here to download tender document Tender Document 0 KB
Click here to download tender document Tender Document 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail