Machinery Job Work, Sub Dn. Khetri - 5.1 Turning Of Various Sizes Of Cid Joints Class- 10/ 15 Complete Set (Labour Charges), The Joints Will Be Supplied By The Junior Engineer Concern Of Department And Carting To Workshop And After Turning Of These Jo, Jhunjhunu-Rajasthan

Machinery Job Work, Sub Dn. Khetri - 5.1 Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concerns store own his cost. 5.1.1 80 mm dia 1 Each 72 72 5.1.2 100 mm dia 1 Each 72 72 5.1.3 125 mm dia 1 Each 96 96 5.1.4 150 mm dia 1 Each 96 96 5.1.5 200 mm dia 1 Each 144 144 5.1.6 250 mm dia 1 Each 241 241 5.1.7 300 mm dia 1 Each 289 289 5.1.8 350 mm dia 1 Each 337 337 5.1.9 400 mm dia 1 Each 433 433 5.2 Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concerns store own his cost. 5.2.1 32 mm 1 Each 16 16 5.2.2 50 mm 1 Each 16 16 5.2.3 65 mm 1 Each 24 24 5.2.4 80 mm 1 Each 24 24 5.2.5 100 mm 1 Each 32 32 5.2.6 125mm 1 Each 48 48 5.2.7 150mm 1 Each 48 48 5.3 Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department. 5.3.1 32 mm 1 Each 12 12 5.3.2 40 mm 1 Each 13 13 5.3.3 50 mm 1 Each 13 13 5.3.4 65 mm 1 Each 14 14 5.3.5 80 mm 1 Each 15 15 5.3.6 100 mm 1 Each 37 37 5.3.7 125mm 1 Each 28 28 5.3.8 150mm 1 Each 29 29 5.3.9 200mm 1 Each 32 32 5.3.10 250mm 1 Each 35 35 5.4 Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. 5.4.1 At Workshop 1 (Per Cm. Length of Welding) 1 1 5.4.2 On Site 1 (Per Cm. Length of Welding) 2 2 5.5 Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. 1 Rate Per Kg. 110 110 5.6 Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate 5.6.1 Up to 12 mm) dia. Hole 1 Per Hole 3 3 5.6.2 Above 12 mm dia. Hole. 1 Per Hole 4 4 5.7 Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these to concerns divisional store own his cost. 5.7.1 50 mm 1 Each Pipe 749 749 5.7.2 65 mm 1 Each Pipe 842 842 5.7.3 80 mm 1 Each Pipe 1017 1017 5.7.4 100 mm 1 Each Pipe 1133 1133 5.8 Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes. 5.8.1 Sluice Valve Size 80mm 1 Each 550 550 5.8.2 Sluice Valve Size 100mm 1 Each 550 550 5.8.3 Sluice Valve Size 125mm 1 Each 695 695 5.8.4 Sluice Valve Size 150mm 1 Each 695 695 5.8.5 Sluice Valve Size 200mm 1 Each 959 959 5.8.6 Sluice Valve Size 250mm 1 Each 959 959 5.8.7 Sluice Valve Size 300mm 1 Each 1193 1193 5.8.8 Sluice Valve Size 350mm 1 Each 1193 1193 5.8.9 Sluice Valve Size 400mm 1 Each 1740 1740 5.9 Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. 5.9.1 Sluice Valve Size 80mm 1 Each 314 314 5.9.2 Sluice Valve Size 100mm 1 Each 314 314 5.9.3 Sluice Valve Size 125mm 1 Each 378 378 5.9.4 Sluice Valve Size 150mm 1 Each 378 378 5.9.5 Sluice Valve Size 200mm 1 Each 422 422 5.9.6 Sluice Valve Size 250mm 1 Each 422 422 5.9.7 Sluice Valve Size 300mm 1 Each 484 484 5.9.8 Sluice Valve Size 350mm 1 Each 484 484 5.9.9 Sluice Valve Size 400mm 1 Each 536 536 5.1 Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes. 5.10.1 Sluice Valve Size 80mm 1 Each 238 238 5.10.2 Sluice Valve Size 100mm 1 Each 298 298 5.10.3 Sluice Valve Size 125mm 1 Each 417 417 5.10.4 Sluice Valve Size 150mm 1 Each 417 417 5.10.5 Sluice Valve Size 200mm 1 Each 483 483 5.10.6 Sluice Valve Size 250mm 1 Each 483 483 5.10.7 Sluice Valve Size 300mm 1 Each 561 561 5.11 Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. 5.11.1 Sluice Valve Size 80mm 1 Each 864 864 5.11.2 Sluice Valve Size 100mm 1 Each 864 864 5.11.3 Sluice Valve Size 125mm 1 Each 1073 1073 5.11.4 Sluice Valve Size 150mm 1 Each 1073 1073 5.11.5 Sluice Valve Size 200mm 1 Each 1381 1381 5.11.6 Sluice Valve Size 250mm 1 Each 1381 1381 5.11.7 Sluice Valve Size 300mm 1 Each 1677 1677 5.11.8 Sluice Valve Size 350mm 1 Each 1677 1677 5.11.9 Sluice Valve Size 400mm 1 Each 2276 2276 5.12 Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm). 5.12.1 2 dia. Size (50 mm) 1 Each Piece 336 336 5.12.2 2 ½ size (65 mm) 1 Each Piece 382 382 5.12.3 3 dia size (80 mm) 1 Each Piece 466 466 5.12.4 4 dia size (100 mm) 1 Each Piece 524 524 5.13 Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm). 5.13.1 2x2 ½ “ dia size (50 x 65 mm) 1 Each Piece 729 729 5.13.2 2 ½ “x 3” dia size (65 x 80 mm) 1 Each Piece 870 870 5.13.3 2”x 3” dia size (50 x 80 mm) 1 Each Piece 903 903 5.13.4 3”x 4” dia size (80 x 100 mm)

Refer document

Refer document

INR 4.90 Lakhs /-