Machinery Job Work, Sub Dn. Udaipurwati. - Turning Of Various Sizes Of Cid Joints Class- 10/15 Complete Set (Labour Charges), The Joints Will Be Supplied By The Junior Engineer Concern Of Department And Carting To Workshop And After Turning Of These Joint, Jhunjhunu-Rajasthan

Machinery Job Work, Sub Dn. Udaipurwati. - Turning of various sizes of CID Joints Class- 10/15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concerns store own his cost. 80 mm dia 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia Threading on Gl Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concerns store own his cost. 32 mm 50 mm 65 mm 80 mm 100 mm 125mm 150mm Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department. 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125mm 150mm 200mm 250mm Welding on M.S./G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/generater, if required for job At Workshop on site Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer-In-Charge complete in all respect Making Hole (only labour charges) by drill machine in MS/CI/ DI Pipes and Specials, per hole rate Up to 12 mm) dia. Hole Above 12 mm dia. Hole. Making of Gl Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department). Length of MS strip will be 100 mm, Width: 20 mm and thickness-6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia, in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these to concerns divisional store own his cost. 50 mm 65 mm 80 mm 100 mm Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes. Sluice Valve Size 80mm Sluice Valve Size 100mm Sluice Valve Size 125mm Sluice Valve Size 150mm Sluice Valve Size 200mm Sluice Valve Size 250mm Sluice Valve Size 300mm Sluice Valve Size 350mm Sluice Valve Size 400mm Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. Sluice Valve Size 80mm Sluice Valve Size 100mm Sluice Valve Size 125mm Sluice Valve Size 150mm Sluice Valve Size 200mm Sluice Valve Size 250mm Sluice Valve Size 300mm Sluice Valve Size 350mm Sluice Valve Size 400mm Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to sire of old U Plate including material for the following sizes. Sluice Valve Size 80mm Sluice Valve Size 100mm Sluice Valve Size 125mm Sluice Valve Size 150mm Sluice Valve Size 200mm Sluice Valve Size 250mm Sluice Valve Size 300mm Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. Sluice Valve Size 80mm Sluice Valve Size 100mm Sluice Valve Size 125mm Sluice Valve Size 150mm Sluice Valve Size 200mm Sluice Valve Size 250mm Sluice Valve Size 300mm Sluice Valve Size 350mm. Sluice Valve Size 400mm Making Direct Pump Piece with heavy duty pipes (Class B) and flange (as per table-D) including cutting of pipe, threading welding and MS strip for length-100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm). 2 dia. Size (50 mm) 2 size (65 mm) 3 dia size (80 mm) 4 dia size (100 mm) Making Reducer Pump Piece with heavy duty pipes (Class B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length-100 mm, Width-20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm) 2x2 ½ “ dia size (50 x 65 mm) 2 ½ “x 3” dia size (65 x 80 mm) 2”x 3” dia size (50 x 80 mm 3”x 4” dia size (80 x 100 mm)

Refer document

Refer document

INR 4.90 Lakhs /-