|
| 1 | Material and labour for opening the AC units by authorised service Engineer/OEM & taking down any unserviceable parts/accessories (compressor, blower motor, leakage testing, air dryer filter replacement )after disconnecting electric connections and taking out the defective parts for repair/replacement and re-assembling and testing commissioning the packaged AC of single circuit (5.5 TR) after repairs. Refixing only serviceable accessories and refixng the ACs to commissioning complete for 5.5 Ton/ 11 Ton (5.5x2)/16.5 Ton (5.5x3) capacity package ACs complete all as specified and as directed. Note : The rate quoted under this item is deemed to be included for each job consisting of labour only for replacement of compressor/blower motorof each AC unit. Supply only of the compressor/blower motor shall be measured and paid separately. |
| 2 | Supply only new compressor sealed units suitable for unit dismantled from item No-1 mentioned above, as per existing make and model, including brazing/welding of suction and discharge line, including first filling gas and leak testing complete 5.5 Ton capacity suitable for 5.5 Ton /11 Ton (5.5x2) package AC complete all as specified and directed. |
| 3 | Supply only fan motor of outdoor unit of any make and model as existing in position for unit dismanted from item No 01mentioned above including other connected accessories of 5.5 Ton/ 11 Ton (5.5x2)/16.5 Ton (5.5x3) Capacity package AC complete all as specified and directed. |
| 4 | Supply only synthetic woven air filter for indoor unit as per existing make and model for 5.5 Ton / 11 Ton(5.5x2) capacity complete all as specified and directed. |
| 5 | Supply and fix in repairs of remote sensing display unit with remote, PCB card & cord as per existing make and model for 5.5TR capacities package type AC complete all as specified and directed. |
| 6 | Supply and fix in repairs of remote sensing display unit with remote, PCB card & cord as per existing make and model for 11 (5.5x2) TR capacities package type AC complete all as specified and directed. |
| 7 | Supply and fix in repairs of remote sensing display unit with remote, PCB card & cord as per existing make and model for 16.5 (5.5x3) TR capacities package type AC complete all as specified and directed. |
| 8 | Supply and fixin repairs of contactor 3 phase suitable for existing 5.5/11 (5.5x2) TR capacities complete all as specified and directed. |
| 9 | Supply and fix in repairs of single/three phasing preventer suitable for 5.5/11 (5.5x2) TR package type AC units complete all as specified and directed. |
| 10 | Supply and fix in repairs of LDPE drain water pipe line, 25mm dia bore, including fittings complete all as specified and directed. |
| 11 | Supply and fix in repairs of gas charging valve of suction or discharge line suitable for 5.5 / 11 Ton capacity AC units as per existing make and model all complete as specified and directed |
| 12 | Supply and fix in repairs of expansion valve suitable for 5.5 Ton /11 (5.5x2) Ton/ 16 (5.5x3) Ton capacity package type AC units as per existing make and model including cutting, brazing/welding, leak testing complete all as specified and directed. |
| 13 | Supply and fix in repairs of \"V\" belt of existing size suitable for indoor unit of 5.5 /11 Ton (5.5x2)/16.5 Ton (5.5x3)capacity package type AC unit of existing make and model complete all as specified and directed. |
| 14 | Cleaning of outdoor condenser coil and indoor evaporating coil using suitable cleaning chemical, washing of filters after cleaning of paint the compact unit of various size of package type AC units of 5.5 TR /11 TR (5.5x2) /16.5 TR (5.5x3) and applying two coats of synthetic enamel paint including preparation complete all as specified and directed. |
| 15 | Material and labour for top up/Gas charging with refrigerant gas (R-22) for Air conditioner package type after vaccuming and leak testing including brazing suction / discharge line and testing complete all as specified and directed. |
| 16 | Supply and fixing in replacement of burnt out PCB unit box with display unit complete with all connecting items of existing make and model for 5.5 TR capacity package AC complete all as specified and directed. |
| 17 | Supply and fix in replacement of burnt out PCB unit box with display unit complete with all connecting items of existing make and model for 11 TR capacity package AC complete all as specified and directed. |
| 18 | Supply and fix in replacement of burnt out PCB unit box with display unit complete with all connecting items of existing make and model for 16.5 TR capacity package AC complete all as specified and directed. |
| 19 | Supply and fix in repairs of high TDS membrane of RO plant of size upto 4040 complete all as specified and directed. |
| 20 | Material and labour for replacement of LED strip including driver of suitable capacity for entry / exit glow sign board of buildings as per existing type all complete as specified and directed. Note : Each sign board will be measured as one Job only of size and description. Quoted rate shall be inclusive of this aspect all as specified and directed. |
| 21 | Material and labour for Mild Steel works of any sizes of angles irons/flat iron made of Fe-410- W(Gde- E-250) quality B, including fabrication for control panel, cover base frame etc complete all as specified and directed. |
| 22 | Material and labour for Mild Steel works of any sizes of Mild Steel sheet 3 mm thick made of Fe-410- W(Gde- E-250) quality B including fabrication for LT out dooor control panel to covercomplete all as specified and directed. |
| 23 | Material and labour for replacement of blast door motor locking pin as per existing model and sizecomplete all as specified and directed. |
| 24 | Disconnecting blast door electric motor and removing 3 HP motor from existing location, servicing including replacement of UNSV parts such as unservicable nut bolts, washer etc as per site requirement and refixing in its original position, testing and commissioning, greasing and painting with synthetic enamel paint of approved colour complete all as specified and as directed. |
| 25 | Taking out for repairing of 30 KVA/16KW 3 phase in / 3 phase out online UPS of microtek make and taking it to workshop for repairing to various output cards/PCBs, battery charging PCB, internal transformers, MCCBs, capacitor, rectifier, inverter, DC-DC convertor, transfer switch, filters, DC link and microprocessor controller main console and refixing it after repair connecting to battery bank complete to make it fully functional for rated output and testing it on site complete all as specified and directed. |
| 26 | Supply only battery 12Volt 65AH SMF, model No 12AL065 including terminal lead connectioncomplete all as specified and directed. |
| 27 | Taking out and repair to ingersole sand brand compressor model UP5-18-8 for 8.5 bar pressure, capacity 2.7 CuM /Min with 18.5 KW motor and ingersoll sand brand drier of capacity 14 bar pressure model No - D240 IN-A and cooling flued R134a complete making it fully fucntional by replacing minor spares (other than items covered as supply only here and after) in all respect and refixing and testing after repair on ground complete including applying one coat of approved synthetic enamel paint over the surface complete all as specified and directed. |
| 28 | Supply only oil filter for ingersole sand brand compressor suitable for model UP5-18-8 as per make and model complete all as specified and directed. |
| 29 | Supply only air filter for ingersole sand brand compressor suitable for model UP5-18-8 as per make and model complete all as specified and directed. |
| 30 | Supply only oil separator for ingersole sand brand compressor suitable for model UP5-18-8 as per make and model complete all as specified and directed. |
| 31 | Supply only pressure transmitter for ingersole sand brand compressor suitable for model UP5-18-8 as per make and model complete all as specified and directed. |
| 32 | Supply only compressor oil for ingersole sand brand compressor suitable for model UP5-18-8 complete all as specified and directed. |
| 33 | Supply only Contact coil for ingersole sand brand compressor suitable for model UP5-18-8 as per make and model complete all as specified and directed. |
| 34 | Material only for top up/Gas charging with refrigerant gas (R-134a) foringersole sand brand compressor suitable for model UP5-18-8 as complete all as specified and directed. |
| 35 | Supply and fixing in repair of LT blast door control panel indoor type made up of 2 mm thick CRCA thick sheet metal enclosure wall mounted type powder coated as per following specifications complete all as specified and directed:-(a)Incoming (i) 32 Amps, 10KA, C type MCB - 01 (ii)63A 4 way opentype connector terminal strip- 01 No(b)Indication lamps (i) 230V AC red indicator lamp- 01 No (ii) 230V AC yellow indication lamp - 01 No (iii) 230V AC blue indication lamp-01 No (iv) 4 Sqmm Fuse Screw Clamp terminal connector-03 Nos (v) 4 Sqmm black din type connector - 01 No (c) Outgoing (i) 230V AC, 415VAC, 1c/o electronic (ESP-2) SP - 01 No (ii) 6A SP MCB 10 KA, C Type - 02 Nos (iii) 4 Sqmm black pin type connector - 02 Nos (iv) Green 1 No Push button - 04 Nos (v) Red 1 NC push button - 02 Nos (vi) 6 A SP 2 way rotary A/M selector switch- 02 Nos (viii) End clamp - As required (ix) 20A TP MCB, 10 KA - 02 Nos (x)18A 1 NO AC3 contactor - 04 Nos (xi)20 A thermal over load relay - 02 Nos (xii) 6 Sqmm red din type connector - 02 Nos (xiii) 6 Sqmm yelow din type connector - 02 Nos (xiv) 6 Sqmm blue din type connector - 02 Nos (xv) Independant mounting kit - 02 Nos (xvi) 1 NO Aux contract block - 04 Nos (xvii) 1 NC Aux contact block - 04 Nos (xviii) 9 A TP 1 No+1NC AC3 230 VACcontactor - 02 Nos (xix)SP - 1 way 6A Toggle switch -02 Nos (xx) 230V AC red indication lamp - 02 Nos (xxi) 230V AC green indication lamp - 02 Nos (xxii) 230V AC orange indication lamp - 02 Nos (xxiii) 12-24 V DC 96x96 hooter (100-260VAC-DC)- 01 No (xxiv) Red emergency -stop push button - 01 No (xxv) 1 NO contact block element- 02 Nos (xxvi) 1 NC contact block element - 02 Nos |
| 36 | Material and labour for cutting of existing hard standing/PCC and make good using cement mortar 1:4 without using extra cement all etc complete as specified and directed. |
| 37 | Excavation in trenches not exc 1.5 Metre wide and not exc 1.5 Metre indepth for pipe line, etc in soft / loose soil getting out and levelling of bottom surface to required level complete all as specified and directed. |
| 38 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick soft / loose soil complete all as specified and directed. |
| 39 | Removing excavated material (Soils) from site to a distance not exc 50 metre away and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed. |
| 40 | Material and labour for cutting GI pipe of size 50 mm dia in position for insertion of new tees, branches of 50x25 mm etc complete all as specified and directed. |
| 41 | Supply and lay GI pipe25 mm bore medium grade ISI marked including all fittings in old/new position as in walls and ceilling/trenches,complete all as specified and directed. |
| 42 | Supplying &fiix metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778of 25 mm sizes gate valves complete complete all as specified and directed. |
| 43 | S & F rotational moulded Poly-ethylene water storage tanks of 1000 ltrs capacity double layered with ISI marking embossed on it (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 44 | Supply and fix ofPTMT float valve with epoxy coated aluminium rod and high density plastic ball of Size 25 mm bore complete all as specified and directed . |
| 45 | Supply & lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire, armoured , electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor,cross-sectional area 10 sqmm, 4 core laid in trenches complete all as specified and directed . |
| 46 | Supplying and laying un-reinforced precast concrete cable cover class LV, flat, Type 2size 300 mm x180 mm x 40 mm all as specified and directed. |
| 47 | Material and labour for sand cushioning in layers of sandbefore and after laying of cable in trenches complete all as specified and directed. |
| 48 | Supply and fix of star delta starter for max motor output at 415 Volt, 3 phase suitable for 3 HP motor relay range 3.8-6 Ampsin sheet metal enclosure for 3 phase complete all as specified and directed. |
| 49 | Excavation over areas, not exc 1.50 m deep and getting out in hard/dense soil complete all as specified and directed. |
| 50 | Material and labour for hard core of broken boulder of guage n exc 63mm, deposited spread and levelled in layers not exc 15cm thick watered and rolled rammed to a true surface complete all as specified and directed. |
| 51 | Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations complete all as specified and directed. |
| 52 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 53 | Material and labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 54 | Material and labour for Prepration of new plastered surface of wall and appliying two coat of camouflage painting with acrylic emulsion paint over a coat of primer etc., complete all as specified and as directed. |
| 55 | Material and labourfor Pre-cast cement concrete block masonry with solid blocks(1:3:6)type C 1, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed. |
| 56 | Material and labourfor 75 mm thick Cement concrete type D2 1:4:8 (40mm gradedstone aggregate) over hardcore complete all as specified and directed. |
| 57 | Material and labour for 5 mm thick rendering in cement mortar 1:4 (as second coat), over and including 10mm thick rendering in cement motar 1:6 ( as first coat)on stone masonrysurfaces even & smooth without using extra cement complete all as specified and directed. |
| 58 | Material and labour for preparation of newly plastered surfaces of wall and two coats oil base distemper over a coat of primer on wall complete all as specified and directed. |
| 59 | Material and labourfor painting to steel surfaces of any description over to 10cm width or girth not cther wise described. Painting two coats of synthetic enamel paint over one coat of red cxide primer incl preparation of new steel surfaces complete all as specified and directed. |
| 60 | Supply and fix for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Diameter of neck 11 to 15 mm complete all as specified and directed. |
| 61 | Supply and fixing for steel work in tubular trusses 80 mm thick medium class incl special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st 240 complete all as specified and directed. |
| 62 | Supply and fix for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,gusset plates,wind ties etc of Fe410- W(GdeE-250) quality-B complete all as specified and directed. |
| 63 | Supply and fix for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
