}

Tender For Road Safety Work On Various Roads Under Pwd Sub Dn. Sayra - Boundary Pillar (Reinforced Cement Concrete M15 Grade Boundary Pillars Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting, udaipur-Rajasthan

Public Works Department has published Tender For Road Safety Work On Various Roads Under Pwd Sub Dn. Sayra - Boundary Pillar (Reinforced Cement Concrete M15 Grade Boundary Pillars Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting. Submission Date for this Tender is 12-01-2025. Safety Consultancy Service Tenders in udaipur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

47036024
Tender For Road Safety Work On Various Roads Under Pwd Sub Dn. Sayra - Boundary Pillar (Reinforced Cement Concrete M15 Grade Boundary Pillars Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting
Open Tender
NCB
Rajasthan
Udaipur
12-01-2025

Tender Details

Tender For Road Safety Work On Various Roads Under Pwd Sub Dn. Sayra - Boundary pillar (Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding painting) 2 Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 3 90 cm equilateral triangle 4 60 cm circular 5 80 mm x 60 mm rectangular 6 Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) 7 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) 8 Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 9 Construction of speed Breaker of IRC standard Hump pipe having width of 3.70M including cost of bitumen, stone aggregate (50-25mm) size hire charges for roller for consolidation and compaction and other machines required for the work including Tack Coat, seal coat. 10 Construction of Rumble stripConstruction of Rumble strips with thermoplastic paint marking 5 Nos x 0.3x.025 high @ 1 mtr c/cincluding marking with thermoplastic paintstrips5 Nos 0.3 x 8.0 m and 4 Nos 0.15 m x 3.75 m size along and across road respectively with premix MSS Type B material and tack coat all inclusive 11 Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973) 12 Road Delineators (Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.) 13 White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning Scraping etc. as per specification Clause 1915

Key Value

Document Fees
INR 500 /-
EMD
INR 30000.0 /-
Tender Value
INR 15 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail