Bids Are Invited For 1. Manual Single beam / Pole Vernier height gauge having measurement range: 0-600mm, Least count / Resolution: 0.02 mm, Accuracy (+ / -): 0.05mm., MAKE : ACCUPLUS / MITUTOYO / BAKER Warranty: 12 months from the date of supply. NOTE: Calibration certificate from accredited /NABL valid for 1 year to be provided . OEM / authorized dealership certificate to be enclosed. 01 Nos SECTION ENGINEER (C&W) OKHA 87245948 2. DIGITAL VERNIER CALIPER with RANGE of 0 to 600MM, Least count of 0.01 mm, accuracy upto +/-0.05 mm Necessary calibration certificate to be submitted at least for 1 year validity from NABL or NABL accredited laboratory. Necessary Warranty Certificate to be submitted along with supply 01 Nos 3. DIGITAL DISPLAY TYPE VERNIER CALIPER 0 to 2000 mm Similar to MITUTOYO MODEL NO (552 -306 ) or INSIZE MODEL NO 1136-2002 ,Resolution in mm : 0.01, Resolution in inch : 0.0005 ,Accuracy: plus or minus 0.14 mm .Can be used to measure internal, External and step dimensions. NOTE: Necessary calibration certifcate to be submitted along with supply. Warranty:- Minimum 12 months.OEM/Authorized dealer with service backup only to quote. Supply to be made in good quality wooden box/Suitable carrying case with easy handling. Make :Baker SDN200 or similar 02 Nos 4. DIGITAL VERNIER CALLIPER , RANGE : 0 - 300 MM / 0 - 12 RESOLUTION: 0.01mm / 0.0005 in,MAKE : Mitutoyo/ Baker / Tesa /INSIZE ONLY. NOTE: Calibaration certificate from accrediated /NABL valid for 1 year to be provided along with vernier caliper. OEM / authorised dealership certificate to beenclosed. 01 Nos 5. Manual Single beam / Pole Vernier height gauge having measurement range: 0-600mm, Least count / Resolution: 0.02 mm, Accuracy (+ / -): 0.05mm., MAKE : ACCUPLUS / MITUTOYO / BAKER Warranty: 12 months from the date of supply NOTE: Calibration certificate from accredited /NABL valid for 1 year to be provided 01 Nos SR. SECTION ENGINEER (C&W) HAPA 87245949 6. DIGITAL VERNIER CALIPER with RANGE of 0 to 600MM, Least count of 0.01 mm, accuracy upto +/-0.05 mm Necessary calibration certificate to be submitted at least for 1 year validity from NABL or NABL accredited laboratory. Necessary Warranty Certificate to be submitted along with supply 01 Nos 7. DIGITAL VERNIER CALLIPER , RANGE : 0 - 300 MM / 0 - 12 RESOLUTION: 0.01mm / 0.0005 in,MAKE : Mitutoyo/ Baker / Tesa /INSIZE (CODE - 1112-300) ONLY. NOTE: Calibaration certificate from accrediated /NABL valid for 1 year to be 01 Nos provided along with vernier caliper. OEM / authorised dealership certificate to beenclosed. 8. DIGITAL DISPLAY TYPE VERNIER CALIPER 0 to 2000 mm Similar to MITUTOYO MODEL NO (552 -306 ) or INSIZE MODEL NO 1136-2002 ,Resolution in mm : 0.01, Resolution in inch : 0.0005 ,Accuracy: plus or minus 0.14 mm .Can be used to measure internal, External and step dimensions. NOTE: Necessary calibration certifcate to be submitted along with supply. Warranty:- Minimum 12 months.OEM/Authorized dealer with service backup only to quote. Supply to be made in good quality wooden box/Suitable carrying case with easy handling. Make :Baker SDN200 or similar 02 Nos 9. Manual Single beam / Pole Vernier height gauge having measurement range: 0-600mm, Least count / Resolution: 0.02 mm, Accuracy (+ / -): 0.05mm., MAKE : ACCUPLUS / MITUTOYO / BAKER Warranty: 12 months from the date of supply. NOTE: Calibration certificate from accredited /NABL valid for 1 year to be provided . OEM / authorized dealership certificate to be enclosed. 01 Nos SR. SECTION ENGINEER (C&W) RAJKOT 87245950 10. DIGITAL VERNIER CALIPER with RANGE of 0 to 600MM, Least count of 0.01 mm, accuracy upto +/-0.05 mm Necessary calibration certificate to be submitted at least for 1 year validity from NABL or NABL accredited laboratory. Necessary Warranty Certificate to be submitted along with supply 01 Nos 11. DIGITAL VERNIER CALLIPER , RANGE : 0 - 300 MM / 0 - 12 RESOLUTION: 0.01mm / 0.0005 in, MAKE : Mitutoyo/ Baker / Tesa /INSIZE ONLY. NOTE: Calibration certificate from accredited /NABL valid for 1 year to be provided along with vernier caliper. OEM / authorized dealership certificate to be enclosed. 01 Nos 12. DIGITAL DISPLAY TYPE VERNIER CALIPER 0 to 2000 mm Similar to MITUTOYO MODEL NO (552 -306 ) or INSIZE MODEL NO 1136-2002 ,Resolution in mm : 0.01, Resolution in inch : 0.0005 ,Accuracy: plus or minus 0.14 mm .Can be used to measure internal, External and step dimensions. NOTE: Necessary calibration certifcate to be submitted along with supply. Warranty:- Minimum 12 months.OEM/Authorized dealer with service backup only to quote. Supply to be made in good quality wooden box/Suitable carrying case with easy handling. Make :Baker SDN200 or similar 01 Nos 13. Waste coupling for LHB wash basin as per DRG. NO.C/SK (MISC) - 159. 500 Nos SECTION ENGINEER (C&W) OKHA 14. PVC FLEXIBLE WASTE PIPE FOR LHB COACH WASH BASIN, 87245956 SIZE- 32 MM Dia., Length-900 mm Color: White 200 Nos 15. PORTABLE IGBT INVERTER BASED SINGLE PHASE MMA WELDING MACHINE 200 AMPS CAPACITY, INCLUDING INPUT CONNECTION CABLE WITH HOLDER (MIN LENGTH10 METRE ) AND EARTH CABLE WITH CLAMP (MIN LENGTH - 10 METRE) AS PER THE TECHNICAL SPECIFICATION GIVEN BELOW 1) INPUT VOLTAGE 230 V(+/-10%) AC, 2) PHASE SINGLE. 3) MAXIMUM OUTPUT CURRENT AT 60% DUTY CYCLE - 190 A +/-10A .4) DUTY CYCLE - 60%. 5) EFFICIENCY MORE THAN 84%, 6) POWER FACTOR MORE THAN 0.90, 7) INSULATION CLASS B OR ABOVE, 8) WEIGHT- 7 to 8 KG (APPROX). MAKE: ADOR FONTECH( MODEL: TORNADO 202 i /WIM (MODEL:200XP) /ESAB Firms Offer Make/Brand: WIM 200XP 04 Nos SR. SECTION ENGINEER (C&W) HAPA 87245957 16. Supply of portable Gas Cutting and welding Set with all attachments as per attached specification 02 Set SR. SECTION ENGINEER (C&W) HAPA 87255024 17. STAINLESS STEEL MUG WITH ONE MTR. LENGTH STAINLESS STEEL CHAIN AS PER DRG.NO. ICF/SK-6-3-481ALT-F, MUG CAPACITY -01 LTR, MATERIAL SPECIFICATION AS PER DRAWING.(Old PL no 30980720 ) 500 Set SECTION ENGINEER (C&W) OKHA 87255025 18 Torque wrench click type of range 400-1000 Ft-Lbs , drive size 1 inch .Equivalent to TAPARIA of model TW 1000. Acceptable make : Taparia / eastman / Mac master / snap on / facom/ torque master or similar with sockets of 30 mm, 36 mm and 46 mm size. 01 Nos SR. SECTION ENGINEER (C&W) HAPA 87255026 19 TORQUE WRENCH ratchet type of capacity 7-35 kg-m (70- 340 Nm) with 3/8 inch(1/2 - 3/4 inch) square drive with socket with calibration and warranty certificate from NABL certified firm. 02 Nos 20 TORQUE WRENCH ratchet type of capacity 1-7 kg-m (14- 70Nm) with 1/2 inch square drive with socket with calibration and warranty certificate from NABL certified firm. 02 Set 21 Pneumatic Torque wrench , Torque range: 850-4200 Nm, Square drive size 1 with 1 to 2 inch sockets . 04 Nos 22 TORQUE WRENCH ratchet type of capacity 14-70 Kgm(135-675 Nm) with 3/4 inch square drive with socket with calibration and warranty certificate from NABL certified firm. 02 Nos 23 BALL POINT METAL MARKER (60ML) OF NOZZLE 5 MM, EXTRA NOZZLE OF 2, 3, 4 MM COLOUR: WHITE, SUPPLIED ITEMS SHOULD HAVE A VALID/ BALANCE SHELF LIFE OF MORE THAN 24 MONTHS FROM THE DATE OF SUPPLY. 10 Nos SR. SECTION ENGINEER (C&W) RAJKOT 87255027 24 BALL POINT METAL MARKER (60ML) OF NOZZLE 5 MM, EXTRA NOZZLE OF 2, 3, 4 MM COLOUR: WHITE, SUPPLIED 40 Nos SECTION ENGINEER (C&W) OKHA 87255027 ITEMS SHOULD HAVE A VALID/ BALANCE SHELF LIFE OF MORE THAN 24 MONTHS FROM THE DATE OF SUPPLY. 25 Torque seal paste / Tamper proof mark having highly fluorescent colour and excellent adhesive as well as safe on metal and all other surface having quick drying time after applying each tube pack containing 30 ml pack. Colour-Orange, make-Century marker or equivalent with extra 2 mm nozzle. 150 Nos SR. SECTION ENGINEER (C&W) RAJKOT 87255027 26 Torque seal paste / Tamper proof mark having highly fluorescent colour and excellent adhesive as well as safe on metal and all other surface having quick drying time after applying each tube pack containing 30 ml pack. Colour-Orange, make-Century marker or equivalent with extra 2 mm nozzle. 200 Nos SECTION ENGINEER (C&W) OKHA 87255027 27 INSIDE MICROMETER TUBULAR. RANGE : 200-225MM LC : 0.01MM MAKE-PRECISION GERMANY ORSIMILAR WITH CALIBRATION CERTIFICATE Make/Brand- ITI MAKE MODEL NO. ITI-200(Warranty period:Upto 30 months from the date of supply) 01 Nos SR. SECTION ENGINEER (C&W) HAPA 87255028 28 Gloss meter for paint, 60 degrees, Details as per attached Annexure - A. Make/brand- RHO point instruments or Model YG60 of 3NH Technology or CALTECH instruments or similar. Note: (1) To be supplied with calibration test certificate, warranty certificate and suitable software/hardware. (2) Material to be supplied by OEM or OEM authorized dealer only. 01 Nos 29 Insize Stainless Steel LCD Digital Outside micrometer range 125 to 150 mm. Brand: insize (Detailed Description/ Specification as per Product # 1 of GeM Contract No. GEMC-511687787723232 dt.05/11/2024) 01 Nos 30 Mitutoyo Tubular inside Micrometer Single Rod 175- 200mm, Accuracy = +/- 5%, Graduation = 0.01mm, Mitutoyo Part # 133-148. Make: MITUTOYO/TESA/FORBES or similar 01 Nos 31 DIGIMATIC MICROMETER (DIGITAL OUTSIDE MICROMETER) RANGE: 175 -200 MM, RESOLUTION: 0.001 MM WITH SPC DATA OUTPUT SIMILAR TO MITUTOYO MODEL 293-253-30, MAKE: MITUTOYO /STARRETT / BAKER Or Similar. CALIBRATION CERTIFICATE IS REQUIRED WITH TRACEABLE TO NABL FOR MINIMUM VALIDITY OF 12 MONTHS. 01 Nos 32 DIGIMATIC MICROMETER (DIGITAL OUTSIDE MICROMETER) RANGE: 150 -175 MM, RESOLUTION: 0.001 MM WITH SPC DATA OUTPUT SIMILAR TO MITUTOYO MODEL 293-252-30, MAKE: MITUTOYO / STARRETT /BAKER or similar. CALIBRATION CERTIFICATE IS REQUIRED WITH 01 Nos TRACEABLE TO NABL FOR MINIMUM VALIDITY OF 12 MONTHS 33 Digital Tubular inside micrometer, Range:- 150-1000 mm, Model No: 3521-1000,Graducation:- 0.001 mm, Make: Insize, Mitutoyo or similar. 01 Nos 34 Surface Roughness Comparator. Model: SA 2.5 (Shot) with NABL Calibration Certificate. 01 Nos 35 Waste coupling for LHB wash basin as per DRG. NO.C/SK (MISC) - 159 300 Nos SR. SECTION ENGINEER (C&W) HAPA 87255029 Total Quantity : 1939
