Tender For Purchase Work Of Electrical Goods Related To Municipal Corporation Greater Headquarters. Year 2024-25 Tender No. 125 Add. Abhi. Light Grater - Supply of 4 feet LED Batten colour Temp 6500 k of 20-22 watt Make:- philips, Havells, HPL, Crompton, Surya, Bajaj, Supply of LED 2x2 swuare & Light Panel of cool Day light Colour 6500 k Colours Temp, JP-20 Protected 36 watt Recessed Type philips, Havells, HPL, Crompton, Surya, Bajaj Surface Type Make:- Cromton, Bajaj, Surya Havells, HPL Supply of Extension Board having 4 soket of 6 AMP and 1.5 mtr Heavy duty wire made on wooden box Icon Gold Madal Havells Supply of Celling Fan 1200 mm Sweep four Blade, orient, Crompton, Bajaj. Havells, Sujata Supply of Wall mounting Fan 1200 mm Sweep. Make, polar, Orient, Bajaj. Havells. Supply of hanging type 6 Amp bed switch made out of industraial grade polycarbonate of fire resistant ABS materital HPL/Phillips/Anchor/Hevells RSupply of LED Bulb Power consmption 9-10 watt Light colour white 1400-1500 Make:- Philips, Hawells, Halonix, HPL, Cromption R Power consmption 15-18 watt Light colour white 1400-1500 Make:- Philips, Hawells, Halonix, HPL, Cromption R Supply of PVC Tape Roll R Supply of Wireless Cordless Calling Remote Door Bell Battery oprated. Make:- Anchar, Cona, Gold Medal, Orient. R Supply of Fall celing down light 9 watt Make:- Surya/HPL/Helonix R Supply of 3 Step Fan Regulator, Anchor, Philips, Havells. SR Supply of Semi moduler 6 Amp Swich Icon Gold Madal, Havells SR Supply of Semi moduler 6 Amp Socket Icon Gold Madal, Havells SR Supply of Semi moduler 16 Amp Swich Icon Gold Madal, Havells SR Supply of Semi moduler 16 Amp Socket Icon Gold Madal, Havells SR Supply of Extension Board having 2 switch, soket of 16 AMP and 1.5 mtr Heavy duty wire made on wooden box Supplying of FR PVC insulated & nsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (15:694) and as per IS 8130: 2013 of 1.1 kV grade. Wire should be made from 99.90% purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, Insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per 15:3961 part 5, In xisting surface or recessed PVC/MS conduit/casing capping making connectionswith Copper Lugs of suitable size, Ferrules, testing etc. as required. OEM Must have Its own in house NABL lab setup for all testing facilities for wires.make havells, HPL, RR, V Mark, Providing ISI marked P.V.C. Insulated submersible cable confirming to(IS:694) and as per 15 8130: 2013 of 1.1 kV grade. Wire should be made from 99.90% purity copper, stranding in acc, to 15:8130/IEC 60228 for lower watt loss, oxygen free for less chances of oxidization, Insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per 15:3961 part 5, existing pipe/open trench/Cable tray/on surface including making connection etc. as required. Polycab, JMP, Havells. Providing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996)/ conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm., conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL/CPRI/ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge, make HPL C&S, Havells. R 6 A to 32 A rating Single pole 6 A to 32 A rating Double Pole R40 A rating Double Pole 100 A rating Four pole Providing of 240/415 V isolator ISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage, true contact Indication, Red colour dolly/lever shall have single mould covering overallpoles for operation, two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board/sheet including making connections, testing etc. as required. OEM shall have submit NABL/CPRI/ ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge.make HPL C&S, Havells. Supplyof 3/4 pole current limiting Moulded case circuit breaker (MCCB) made of flarne retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415, 50 Hz: O/L & S/C settings conforming to I5/IEC 60947 P-2:2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive Isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics 100% ICU. U imp 8 KV, rated insulation voltage 690 V. provision for UVR, shunt trip, earth fault trip, door Interlock, pad lock & rotary handle including making connections etc. as required.OEM shall have submit NABL /CPRI/ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in-charge. C&S, L&T, HPL 14 pole MCCB With Microprocessor based release with adjustable O/L & 5/C setting with Inbuilt Instantaneous and Ground fault Protection Upto 160 Amp, 50 KW Upto 250 Amp, 50 kA Upto 400 Amp, 50 kA Upto 630 Amp, 50 KA Upto 800 Amp, 50 kA Providing of ISO certified company made TP&N 415 V Front handle operated double break fuse switch unit in sheet steel enclosure as per PWD specification for electrical Works conforming to 15/ЛЕС 60947-3:1999 (W/O HBC fuses) including making connections with suitable lugs, testing etc. as required. Appropriate type test certificate/OEM test report shall be submitted. All as per pre approved by Engineer In-charge. 63 A rating 100 A rating 200 A rating 400 A rating Providing of ISO certified company made 240/415 V porcelain kitkat fuse (/HBC type) as per PWD specification for electrical Works conforming to RIS:2086,1983 on existing board/sheet including making connections with lugs, testing etc. as required. Appropriate type test certificate/OEM test report shall be submitted. R 63 A, 415 V R 100 A, 415 V R 200 A, 415 V Providing of ISO certified company made bus bar chamber housed in sheet metal box as per PWD specification for electrical Works Confirming to IEC- 60439/15-8623 & IEC-60529/IS-2147 made out from 1.6 mm thick powder coated CRCA sheet, degree of protection IP-31, front openable bus bar R made out of Copper suitable for 200 amp. Capacity, bus bar fixed on porcelain/DMC Insulators at approved spacing including making connections etc. as required. Appropriate type test certificate/OEM test report shall be submitted. Providing & Laying P.V.C./XLPE insulated & P.V.C. sheathed UnArrmoured Aluminium cable confirming to IS:1554 P-1/IS:7098 P-1 of 1.1 KV with H4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6%, Inner/outer sheath confirming to IS:5831 in existing RCC/ Hume/Stoneware/PVC pipe/open duct/cable trench/Cable tray (with cable tie) including testing etc. as required of following size. OEM must have its own inhouse NABL accrediated Laboratory for testing procedure as per 15:10810 R 6 sqmm x 2 Core SR 10 sqmm x 2 Core BSR Providing & Laying P.V.C./XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I/IS:7098 P-1 of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6%, round/flat strip armouring of cables, Inner/outer sheath confirming to IS:5831 in existing RCC/Hume/Stoneware/PVC pipe/open duct/cable trench/Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure. BSR me 16 sqmm x 2 Core BSR me 10 sqmm x 2 Core m BSR tem 16 sqmm x 4 Core n BSR tem 25 sqmm x 3.5 Core On BSR Item 50 sqmm x 3.5 Core won BSR Item 70 sqmm x 3.5 Core Mon BSR Item 120 sqmm x 3.5 Core Not BSR Again Supplying and making end termination with heavy duty Copper lugs (ANY type) confirming to IS 8337-1976 duly crimped with crimping tool, PVC tape etc of following size All as per pre approved by Engineer In-charge. Providing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996)/ conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm., conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating Including making connections, testing etc. as required. OEM shall have submit NABL/CPRI/ ERDA accrediated lab type test reports & All as per pre approved by Engineer incharge. Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating Double pole MCB(With B/C curve tripping Characteristics) 6 A to 32 A rating 40 A rating 50/63 A rating Providing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver, System lumen efficacy 2110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection, THD <10%, P. F.20.95, CRI >80, life timeof minimum 50000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000°K/4000K/ 700°K/6000K/6500°K (As per ANSI Bin), Maximum power consumptionshould not more than the specified rating and Fixture shall be of BISstandard and trade mark certificate (T.C.). Manufactures WordMark/ Name Engraved/Embossing/Screen printing on housing. OEM must have its own in house NABL lab setup for all testingfacilities for LED fixtures. (LM79 & LM80) certificate/Report from OEM shall be submitted. 1170mm(+/-10%) LED batten with min. lumen output 2200 Im Providing of Tube light Rod 36 W Providing of Tube light starter Providing of Tube light Rod 36 W Providing of Tube light starter Providing of Tube light Choke Providing of Heat convertor make Usha/bajaj Providing of Room Heater 2000W Providing of IK08 IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece construction powder coated die cast alluminium housing with UV stabalized Clear/frosted Polycarbonate diffuser and Aluminium anodised with sand blast reflector. The System level Luminous efficacy ≥ 100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The Integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. Minimum lumen output 4500 Im Post top Illuminations Providing of IKD8 IP-66 protected high power LED floodlight system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BISR number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy > 125 im/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>-300 V AC and Auto resetting Safety Power Factor >0.95, THD(1) <10%, driver current <-750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Surge Protection Min >-4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 1355K. Manufactures Word Mark/Namengraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/report with llable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer In-charge. For additional technical parameters of products/ High Power LED Flood Light Minimum lumen output 12400 Im Providing of IK10 IP65 protected 600 mm height LED Bollard Luminarle with base plate made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy 2: 90 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<20% and input Voltage range of 90-270V AC at 50Hz. System life of 30000 Burning hours with 70% of Initial Lumens maintained Light output in Cool white or Warm White Colour as per engineers choice. driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with llable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. HPL, Halonex, bajaj, surya, orrient, Providing of IK10 IP66/IP67 protected Rectangular shape LED Step Luminarie made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy 2 90 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of IS 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mak Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/report with llable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer Incharge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. HPL, Halonex, bajaj, surya, orrient, Supply of Minimum lumen output 800 Im Step light S&F following sizes (dia.) of ISI marked virgin material MMS (IS:9537 P-III) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product/work refer Annexure A attached with this BSR 32 mm Providing of ISI marked (15:3854) non modular 6A bell push surface type CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required. All as per pre approved by Engineer In-charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. Providing of ISI marked non modular 6A hanging bell push/one way switch made out from Industrial grade Polycarbonate or fire resistant ABS materialincluding making connection testing etc. as required. All as per pre approved by Engineer in-charge BSR me Providing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. BSR Providing of 3/6 pin 16 amp flush type non modular socket made out from Industrial grade olycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer In-charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. IS Providing of ISI marked (IS:1293) 6 amp unbreakable 3 pin plug top having lamp indicator with CM/L no. printed and made out from Industrial grade Polycarbonate or fire resistant ABS material, brass terminal Including making connection testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. Providing of ISI marked (IS:1293) 16 amp unbreakable 3 pin plug top having lamp Indicator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal including making connection testing etc. as required. All as per pre approved by Engineer In-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. SR Providing & Fixing of ISI marked (IS: 2268-1994) gong bell with CM/L no. printed including making connection testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. SR Providing & Fixing of ISI marked surface type buzzer (IS:2268-1994) with CM/L no. printed including making connection testing etc. as required. All as per pre approved by Engineer In-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. SR Providing of single/multi tone electronic call bell as per PWD specification for electrical Works, Including making connection testing etc. as required. All as per pre approved by Engineer Incharge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. SR Providing of ding dong/musical chime bell as per PWD specification for electrical Works, including making connection testing etc. as required.All as per pre approved by Engineer Incharge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. SR Providing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware, flexible 3 core copper conductor, making connections, testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR. Providing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to 15:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer In-charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR. 450 mm sweep(900/1400 RPM) Providing of LT MIP meter box for new JVVNL meter connection. Providing of CT, PT for LT Line of size 100/5 for new JVVNL meter connection.
