|
| 1 | Supply of 300mm dia LED Retrofit LED based comp site solid state laminate module using ultra bright low power LED with high conversion efficiency and multiple drive circuit streams to ensure fail back configurations and minimum failure consumiting of 10 watt eacpower having horizontal LED arrangement. |
| 2 | A) For Red luminous intensity of LED 160m cd min. viertical angle 70 degree min |
| 3 | B) For amber luminous intensity of LED cd min. vertical angle 24 degree min. |
| 4 | C) For Green luminous intensity of LED 120 cd min. vertical angle 24 degree min |
| 5 | D) For pedistitrain signal luminous intensity of LED 70 cd min. vertical angle 24 degree min. Aspect Red signal |
| 6 | E) For pedistitrain signal luminous intensity of LED 70 cd min. vertical angle 24 dgree min. Aspect Green signal |
| 7 | Supply of 300mm dia polycarbonate lamphead assemly |
| 8 | Mounting of 300mm dia FRP/polycarbonate traffic signal head on the pole and wiring the same the tag block in pole cap/junction with type plug termination etc complete (i) Cantilever polse(A) Signle aspect. |
| 9 | Supply of Microprocessor based automatic traffic signal controller housed in MS 16 SWG fabrication water proof, rust proof and dust light double walled cabinet and switch box with locking arrangements with lock and keys. Suitable for mounting on a pedestal incorporating the following Minimum 8 plans and 8-phase with manual controlling and blinker mode. Minimum 7 days clock and signal lines suitable for isolated type traffic junction |
| 10 | Supply of traffic signal pole assembly complete with 100mm inner dia, pipe (B Class) including providing M.S. base plate of size 200mm*200mm *100mm thick switch with bottom of the pole flanged FRP cap at top, the pole painted with 2 coats of zinc chromate primer and in addition bituminous painting for the bottom 1.5m, portion of pipe, providing cable entry hole etc. complete. |
| 11 | A) 6.00Mtrs. Loge Pole |
| 12 | B) Cantilever Pole 9meter long |
| 13 | Installing the controller on C.C. 1:2:4 pedestal 60cm above G.L. of suitable size testing and commissioning with any number of phases including providing earth station as per I.S. rules etc.complete. |
| 14 | Erection of traffic signal pole in 60cm * 60cm 1.00m deep pit with 11:5:3 cement concrete and C.C. plastering, curing. |
| 15 | A) Normal Pole (6mtr hight) |
| 16 | B) Cantilever Pole |
| 17 | Local earthing of signal / street light pole when use as traffic pole with 10m length of 10 SWG G.I. Wire loop being kept at minimum of 2m below G.I. etc. complete as per I.S. Rules |
| 18 | Painting of signal pole with 2coats of synthetic enamel paint approved colour |
| 19 | A) Normal Pole (6mtr hight) |
| 20 | B) Cantilever Pole |
| 21 | Supply and laying of multicore aurmourd Flexible/solid core copper conductor PVC insulated & sheatered cable 1 sq.mm. c/s area as per I.S. |
| 22 | A) 7Core (Approximate |
| 23 | B) 14Core (Approximate) |
| 24 | Excavation of trench 60cms wide and 1.00 deep |
| 25 | laying cable on side shoulder, including spreading sand providing bricks lining for cable protection refilling the trench, leveling, clearing the site etc. complete without top finishing and reinstatement |
| 26 | Exacavation of damber road |
| 27 | Providing and fixing MS 16 guage junction box with removable base plate with wooden plant inside for signal/three phase MSEDCL service connection with main switches, distribution board, indicators with necessary fixing accessories as per I.S. std etc. complete |
| 28 | Providing and fixing junction box on signal/street pole for cable connection including looping taking cable through G.I. pipe upto junction box from ground leave etc. complete |
| 29 | Supply of installation in material like condults reducer, coller, adopter B.T.W. wire flexible piper etc |
| 30 | Supply and Installation and commissioning of Digital traffic signal balance time indicator with Red, and Green Phase timing in second, with super bright LED\"s seven segment of size 8\" height 4\" width, 3 digit Red LED display having 250 med Luminius output of each digit and leading zero super fine with red transparent acrylic in front side of M.S. 18 SWG |
| 31 | supply& laying of 50mm dia DWC pipe |
| 32 | Supply & Fixing of 50mm dia GI Pipe |
| 33 | Solar Blinker with pole |
| 34 | Supply of6mtr long traffic signal pole assembly complete with 100mm dia. Pipe class B including providing M.S.base plate of size 200mmx200mmx6mm thick welded with bottom of the pole painted with rubber paint below ground level and red oxide on exposed surface and finishing with traffic yellow enamel paint in two coats complete as required etc complete. |
| 35 | Supply of LED mounted digital traffic signal cantiliver pole of GI (ERW) rectangle type/round type including LED module fixtures, control, unit, driver relays, cables & wires necessary asccessories as required Vertical Pole shaft: 150mm x150 mm x 5 mm (Thickness) and 6.7 MT height withHorizontal Arm: 150 x 1 0 0 x 3 . 5 - 4 mm thick and 6.57M length. Fixture Arm for Aspects at Center: 80mm x 80mm x 3mm x 1300mm. Base Plate: 400 x400 x 20mm welded and painted in appropriate colour etc completre. |
| 36 | Installation and commissioning of control and LED module fixtures on above catiliver pole with fitting accssories as specified complete |
| 37 | Supply of 300 mm dia signal LED Retrofits consisting of High Efficiency, High reliability imported super brightness LEDs with light output brightness up to 256 cd with 10w. The operation voltage is 230 V AC ( +/- 15%)having on board driver & work in the range of 180 VAC to 270 VAC having operating temperature range 0 to 50 degree celsius. It is having fuse transient voltage supressor & short circuit over voltage & water leakage protection etc assembly with all materials. |
| 38 | a.Vehicular RED Round with more than 177 LEDs |
| 39 | b.Vehicular AMBERRound with more than 177 LEDs |
| 40 | c.Vehicular GREEN Arrow with more than 90 LEDs |
| 41 | d.pedstrian RED (Stopman) with more than 90 LEDs |
| 42 | e.pedstrian GREEN (Walkman) with more than 90 LEDs |
| 43 | Vehicular Amber Arrow with more than 90 LEDs |
| 44 | Supply of 300 mm dia polycarbonate lamp head assembly with polycarbonate visor lens, hood, extra polycarbonate back cover etc complete |
| 45 | Installation & mounting of lamp head assembly on thestraight 6m pole etc complete. |
| 46 | Installation & mounting of lamp head assembly on thestraight 13.27 m cantiliver pole etc complete. |
| 47 | Supply and laying of copper conductor appropriate PVC insulated 1.5 sq. mm. armoured cable in pre laid conduit as follow |
| 48 | a.2 Core Cable |
| 49 | 3 core armoured shilded cable |
| 50 | Supply of Microprocessor basedATCS compatible traffic signal controller shall be equipped with GPS including providing of cabinet and other accessories etc complete with wired communicationtopology for distributed digital control of various node controllers installed on poles this features is required for using only twocable INSTEAD for traditional multi core cables etc complete |
| 51 | Installation of Master Controller |
| 52 | Supply ofNode controller on each pole for termination of control cables with topology base NODE card for lamp connection as digital distributed signal (DDC) microcontroller basedETC. COMPLETE. |
| 53 | Installation of Controller on pole with testing and commissioning with any no. of phases including providing earth station as per IS rules etc complete |
| 54 | Supply of COUNT DOWN TIMER (CDT) alfanumeric on traffice signal Pole of digit size 8\" & should show verious TRAFFICE RELATED SLOGAN MESSAGES IN ENGLISH & MARATHI during the RED signal watting period |
| 55 | Installation testing and commissioning of CDT |
| 56 | Supply of installation material like conduits, reducer, collar, adoptor, BTW wire, flexible pipe etc complete |
| 57 | \"SupplyofMaster Controller - Innovative Traffic Controller having Master - Slave Configuration with Wireless (ISM Band), Working Voltage 12V DC-Solar Power Compatible, (inbuilt back up and auto charging facility) Wireless Operation with 16 lines per Master/Slave.System Clock with auto Time Correction Integrated Real Time Clock With GSM interface capable to communicate web monitoring, Inbuilt manual actuated auto flash provision, Pole Mountable, Lamp Intensity Control, Upgradable for cable less corridor synchronization, housed in MS 16 SWG fabricated box with powder coated finish in appropriate color, water proof, weather proof, dust tight, including all fittings with all features and facilitites as per technicalspecificationsetc complete |
| 58 | Installation, Testing and Commissioning of Master Controller |
| 59 | Supply of Slave Controller - operate on command of Master Controller with required no. of optically isolated solid state lamp driving outputs, input provision for four optically isolated Vehicle detector interface. Working Voltage - 12 V DC - Solar Power Compatible with inbuilt back up & charging facility,housed in MS 16 SWG fabricated box with powder coated finish in appropriate color, water proof, weather proof, dust tight, including all fittings etc complete. |
| 60 | Installation, Testing and Commissioning of slave controllers |
| 61 | Supply of reverse countdown timer two & half digit, dual color (Green & Red) Red color for Red display and Green color for green display, character height 8\", visible in day light from (300 meters and readable from 100 meters housed in powder coated MS box complete.) |
| 62 | Installation, Testing and Commissioning of Count Down Timer |
| 63 | Supply and Connecting of multy core X0.5 sq. mm copper conductor tintedsolar cable inclusive of work of jointing &connecting with signal system (Slavecontrollers, Downcounters, traffic signalaspects & R/F modules). |
| 64 | Supply of medium gauge (class B) 6.00mtr Long std traffic signal pole assembly complete with 80mm Dia including base plate of size 200*200*10 mm thick welded at bottom as per I.S 1239 with approved synthetic enamel paint complete. |
| 65 | Supply of 200 mm dia LED blinker (Amber blow retrofit) with inbuilt flasher and battery charging unit, maximum power consumption upto 10W ± 10%, on board driver, universal input voltage facility, with inbuilt 7AH lithium battery backup provision so as to back up for 24 hours autonomy housed in Polycarbonate assembly with visor lens and required fittings etc complete. |
| 66 | Supply of 300 mm dia LED blinker (Amber blow retrofit) with inbuilt flasher and battery charging unit, maximum power consumption upto 10W ± 10%, on board driver, universal input voltage facility, with inbuilt 12AH lithium battery backup provision so as to back up for 24 hours autonomy housed in Polycarbonate assembly with visor lens and required fittings etc complete. |
| 67 | Supplying, installing, testing and commissioning of solar panel comprising high efficiency poly-crystalline / multi crystalline photovoltaic cell 30Wp, 12V with necessary clamps and elevated slanting structure for mounting frame should be made of MS angle 30mm*5mm with one coat of red oxide and two coats of synthetic enamel paint etc complete. |
| 68 | Supplying, installing, testing and commissioning of solar panel comprising high efficiency poly-crystalline / multi crystalline photovoltaic cell 50Wp, 12V with necessary clamps and elevated slanting structure for mounting frame should be made of MS angle 30mm*5mm with one coat of red oxide and two coats of synthetic enamel paint etc complete. |
| 69 | Erection of above pole incement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. X 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole) and installation, testing & commissioning of blinker with all accessories, local earthing to the pole, fittings etc complete. |
| 70 | Supply of LED mounted digital traffic signal cantiliver pole of GI (ERW) as required Vertical Pole shaft: 150mm x150 mm x 5 mm (Thickness) and 6.7 MT height withHorizontal Arm: 150 x 1 0 0 x 3 . 5 - 4 mm thick and 6.57M length. Fixture Arm for Aspects at Center: 80mm x 80mm x 3mm x 1300mm. Base Plate: 400 x400 x 20mm welded and painted in appropriate colour etc completre. |
| 71 | Making Horizontal Directional Drill / Bore of 150 mm dia and depth up to 1.5 mtr in soft soil and laying 150 mm HDPE pipe etc. complete as per specification |
