Tender For Yearly Rates Finalization And Contractor Panel For Dth 150/Dth 115/Rotary/Tubewell For Year 2024-25, gadchiroli-Maharashtra

Tender For Yearly Rates Finalization And Contractor Panel For Dth 150/Dth 115/Rotary/Tubewell For Year 2024-25-1 A) 150 mm. Vyasache D.T.H. Vindhaankaam and related works. 2 Drilling work (Vahatukisah) (Includes soil / mud strata 200 / 215 mm diameter drilling work and concrete 150 mm diameter drilling work) (Wet drilling) 3 Capacity test by flashing (Air Lift Method) after completion of blasting process at 90 degrees which (half hour) 4 150 mm Vyascha Atyacha Lokhandi Casing Pipe,M. S. E.R.W. Medium Claus (IS :1239) 4.80 mm. Jadi, (with socket) 5 150 mm Vyascha Atyacha Lokhandi Casing Pipe, 4.80 mm. Rates for jointing, drilling and grouting 6 150 mm Vyascha Atyacha Lokhandi Cap for Casing Pipe, (IS :1239) 7 150 mm Vyasache D.T.H. 180 mm for cutting purpose. Vyascha P.V.C. Casing Pipe 6 kg/cm2) (IS:4985-9988) 8 150 mm. Vyasache D.T.H. 180 mm for cutting purpose. diameter(6 kg/cm 2) and(8 kg/cm 2) P.V.C. Casing pipe casing lowering, handling and grouting (up to 12 meters) 9 150 mm Vyasache D.T.H. 180 mm for cutting purpose. diameter(6 kg/cm 2) and(8 kg/cm 2) P.V.C. Casing pipe: Casing lowering, handling and grouting (for casing more than 12 meters) 10 180 mm. Vyascha P.V.C. Casing Pipe 8 kg/cm 2) (IS:4985-9988) In exceptional circumstances/in places with rocky ground and if casing pipe is necessary beyond 40 feet, then Sadar Casing may be used with the technical approval of Deputy Engineer and Geologist. 11 180 mm. Vyascha P.V.C. cap for casing pipe pipe 12 150 mm. Vyasache D.T.H. 200 mm for cutting purpose. Vyascha (Outer) P.V.C. Casing Pipe 8 kg/cm2) (IS:4985-9988) 13 150 mm. Vyasache D.T.H. 180 mm for cutting purpose. Vyascha (Outer) P.V.C. Casing Pipe 6 kg/cm2) (IS:4985-9988) 14 150 mm. Vyasache D.T.H. 180 mm for cutting purpose. Dia 7(Outer) Lokhandi Casing Pipe, M.S.ERW Medium Class (IS :1239) 15a) 150 mm. Rotary drilling work and related works. 16 work 17 transport (3 vehicles transport) 18 gravel packing 19 development 20 bell plugs 21 wooden plank (1 m long x 0.150 m long x 0.200 m deep) 22 Lokhandi Clamps (1 m long x 0.10 m x 0.01 m wide) 23 150 mm. Vyascha Bean Atayacha Lokhandi Casing Pipe, (M.S.) E.R.W. Medium Clause (IS1239),4.8. mm. Jadi 24 150 mm. Vyascha (M.S.) E.R.W. Medium Class Lokhandi Casing Pipe (Jalicha) (IS1239), 4.8. mm. Jadi 25 150 mm Rates including diameter and diameter of stainless steel casing pipe, lowering and welding work. 26 e) 115 mm. Diameter of drilling machine(SURFACE BORE/PROBE BORE/Inwell Bore/Recharge Shaft, Jacket Welll,BBT,FSC,SBT,etc.) 27 Winding work (with transportation) (Mati Murumachya / Earths crust 150 m. m. Vyasache reaming, cutting work and cooked stone 115 m. m. It includes wet drilling. 28 (After completing the drilling process, capacity test by flashing (Air Lift Method) 90 degree Whi kneading (for half hour) 29 Labor for lowering the bench in Vihiri and removing layers and removing the cutting material from Vihiri with a welcher. 30 Unloading of blanks from the bencher and other literature machines and loading them back on the machine after completion of the work, as well as site preparation of the drilling work of unconventional plan and solving each drilling site on the bencher. 31 for boar blasting The drilling holes to be taken should be completely quenched after blasting for safety reasons (the same rate will be applicable only for extinguishing the drilling holes dug under Jacket well, BBT, SBT) 32 125 mm. Vyasachya Atyachya Lokhandi Casing Pipe (M.S.) E.R.W. Medium Claus (IS:1239)4.8 mm socket(socket) 33 125 mm. Vyascha Atyacha Lokhandi Casing Pipe Lowering and Grouting Rate Basis cost 4.8 mm. Jadi 34 125 mm. Vyasachya Atyachya Cap for Lokhandi Casing Pipe (IS:1239) 35 115 mm diameter for vent/hole 140 mm. diameter 4 kg/cm 2pvc Casing PipeIS 4985-1988 36 115 mm diameter for vent/hole 140 mm. diameter 6 kg/cm 2pvc Casing Pipe As per IS 4985-1988 37 140 mm diameter 4 kg/cm2 p. Wh. C. Rate of Casing Pipe Lowering and Grouting 38 140 mm diameter 6 kg/cm2 p. Wh. C. Rate of Casing Pipe Lowering and Grouting 39 140 mm diameter PVC cap for casing pipe 40 P.V.C. used for recharge shaft. Making mesh at suitable place for casing pipe 41 o) Hand Pump Ugraani and Hand Pump Ota Bandhani Rate 42 Hand Pump Urbhaani India Mark 2/India Mark 3/Extra Deepwell/VLOM/50 Pump, (Sodding with rising pipe and connecting rod) 43 digging 44 Dry Rubble Stone Filling As Direct Measurement 45 1:2:4 (M-150) Cement Concrete As Direct Measurement 46 vehicles (40 km long range) per hand pump, mounting and assembly work (vehicle tempo/mini truck) 47 Nameplate Lavane Size 60 X 80 cm. 14 Gauge M.S. Sheet, M.S. Angle Size 65 X 65 X6 mm----etc. (PWD SSR 2020-21 Item No.6.50 Sr.No.302) 48 a) Dual Pump Stirring 49 Dual Pump Special Water Chamber Chamber (Galvanized) specially developed for stirring purposes. 50 Stainless Steel Stilche Bottom Nipple for Dual Pump Urching Work 51 m) To test the efficiency of Vindhan Vihirichi electric pump. 52 Testing the efficiency of electric pumps and generators per drilling rig, 53 Vindhan Vihirichi Water breaking work done, flashing done, capacity testing done, removal and installation of emergency pump done, Vindhan Vihir special repair done 54 A:)150/115 mm. Rejuvenation/redrilling/flashing of diameter drilling holes along with transportation rate 55 150 / 115 mm Rate for rejuvenating/redrilling flushing of drilling well along with transportation (per drilling well)

INR 8000 /-

INR 150000.0 /-

Refer document