|
| 1 | Marking Centre Line stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160° C with a special applicator machine complete with labour, material and traffic diversion arrangements. |
| 2 | Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat,making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as perIRC : 99-1988 |
| 3 | (a) 3.70 meter wide and 10 cm high for general traffic |
| 4 | (b) 5.0 meter wide and 10 cm high for heavy truck and bus traffic |
| 5 | Supplying cautionary / Warning Reflective sign boards made out of 2 mm thick M.S. sheet as per IRC –67-1977, stove enameled and reflective symbol fixed on Angle Iron of size 65 x 65 x 6mm of 3 meter long : 90 cm equilateral triangle |
| 6 | Supply of mandatory / regulatory reflective sign board fixed on 3 meter long Angle Iron of size 65x65x6 mm complete as per IRC-67-1977 made of 2 mm thick M.S. sheet stove enameled paint and reflective symbol. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 7 | (a) Give way signs with definition plate size 30x20 cm 60 cm equilateral triangle |
| 8 | (b) Prohibitory signs of circular shape60 cm Dia |
| 9 | (c) Prohibitory signs of circular shape40 cm Dia |
| 10 | (d) Stop signs with definition plate size 30x20 cm90 cm Octagon each |
| 11 | Supplying informatory reflective sign boards make of 2mm thick M.S.sheet, stove enameled paint as per IRC-67-1977 fixed on Angle Iron of size 65 x 65 x 6 mm of 3 meter long. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom 60 x 45 cm with size of square 30 cm. |
| 12 | Supplying route Marker reflective sign boards consisting of shield marked on M.S. flat 14 gauge of size 60 x 45 cm and definition plate of 30 x 25 cm, 14 gauge, fixed on mild steel posts of Angle Iron of 65X65X6mm – 3mtr.long for NH/SH: Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 13 | Supply of flood gauge (water Gauge) as per I.R.C. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 M. long. |
| 14 | Fixing of flood gauge (water Gauge) in cement concrete M-15 mix size 30x30x60 cm. complete including transportation excavation etc. complete |
| 15 | Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective background with additional border of 1.25 cm all around it. |
| 16 | Installation of sign board having the post like mandatory cautionary & informatory board includes excavation, cement concrete 1:5:10 (30X30X60) cm and transportation complete. |
| 17 | P & F Delineator with 30 cm. outer dia RCC Hume pipe NP-2 (As per IS-458/ 1971 ) pipe 1.0 M. Long 40 cm embedded in cement concrete (1:2:4) block of size 50x50x40 cm. including excavation up to 40 cm depth. The inside of pipe shall be filled with C.C. (1:2:4) stone grit max size 20 mm or less up to the top with semi circular humping. The pipes shall be painted white/black with enamel paint with red dots two Nos. on each side |
| 18 | Supplying Direction and place identification sign board made out of 2 mm thick M.S. sheet framed to angle iron 40x40x5 mm and two vertical posts of angle iron of size 65x65x6 mm 3 meter long with hold fasts, stove enameled paint reflective letter symbol Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom120 x 75 cm. |
| 19 | Painting with superior grade enamel paint of approved quality to give an even shade including writing littering figuring etc. complete as per IRC standards of:- |
| 20 | 5th Km. stone |
| 21 | Km. Stone for ODR & MDR |
| 22 | 200 M stone & Boundary stone |
| 23 | Providing and applying 2 coats of water based cement paint to unplaster concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 liter for 2 Sqm. |
| 24 | Removal of existing sealant and re-sealing of contraction, longitudinal or expansion joints in concrete pavement with fresh sealant material hot poured rubberized bitumen or cold polysulphide type as per Clause 602.2.8 with appropriate type of primer complete as per MoRTH specification Clause 3005.2.. |
| 25 | Random rubble stone masonry for foundation & plinth in cement sand mortar above 30 cm thick walls In cement sand mortar 1:6 |
| 26 | Plaster on new surface with cement mortar (1:4) including racking of joint etc. complete fine finished 20mmthick. |
| 27 | White washing of parapets, kerbs, railings, boundary stones, guard etc. complete: Old surface-two coats. Labour charges for white washing |
| 28 | White washing of trees1.50 m height complete: Girth from 600 mm to 900 mm |
| 29 | Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.as per MoRTH Specification Clause 804. |
| 30 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplingsand trees girth up to 300 mm, removal of stumps of trees cut earlierand disposal of unserviceable materials and stacking of serviceable material up to a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MoRTH specification clause 201 By mechanical Means. In area of light jungle |
| 31 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 including cost of compensation for earth taken from private land with ALL lead As per MoRTH specification Clause No. 305. (CBR not less than 8) such as Sandy, Bhuda, Balu etc.non plastic soil |
| 32 | Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means with all lead & lift For Grading I Material |
| 33 | Providing, laying, spreading and compactingstone aggregate forWet Mix Macadam (as per table 400-10 and 400-11) specification including premixing the material with water to OMC in wet mix plant as per approved design mix, carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/Front end Loader/paver finisher, in sub base/ base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintenance of diversion etc. (MoRTH specification : Clause 406) by mechanical means with lead & lift |
| 34 | Repair of pot holes byWet Mix Macadam material by removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, compacting base of excavation as per clause 503, back filling the pot holes with wet mix macadam material by manual meansas per clause 406, compacting with roller 8-10T, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004. |
| 35 | Filling Pot- holes and Patch Repairs with open - graded Premix surfacing,20mm followed by seal coat type \"B\". Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material using bitumen 80/100 as binderas per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 |
| 36 | Providing and laying reinforced cement concrete pipes N.P.4 for culverts including jointing ends and fixing collar with cement mortar 1:2 [MoRTH Specification : Clause : 1000/2900] 300 mm Dia |
