Tender For Installation Of On-Grid 50 Kw Solar Roof Top System - Supply And Installation Of Solar Photo Voltaic Modules Each Solar Pv Modules Should Mono-Crystallize Type With Minimum Power Of 545 Wp 46.01 Volt Dc With Temperature With Stand Ability Upto , siliguri-West Bengal

Tender For Installation Of On-Grid 50 Kw Solar Roof Top System - Supply and Installation of Solar Photo Voltaic modules Each Solar PV modules should Mono-crystallize type with minimum power of 545 Wp 46.01 Volt DC with temperature with stand ability upto 60 degree Centigrade manufactured by IS / MNRE approved manufacturing company) Make : HAVELLS/SOLTECH/WEBSOL 2 Supplying and installation of MPPT based inverter highly efficient with efficiency up to 95%. 50 kva on-Grid single phase Grid Synchronised base Solar inverter (RENOU-Renewable Energy Optimum Utilization Unit) manufactured by MNRE approved.Make: INVT/THEA/HAVELLS 3 Anti Reverse Power Controller Device 4 Supply Installation & Commissioning of Solar Photo Voltaic (PV) unit of Roof Top using suitable GI Angle and channels with suitable pillar / grouting arrangement (Civil Structure ) to hold all the modules firmly with Roof too. Array junction boxes & DC power cables (Approx. 30 mtr. or as required with various sizes of cables as per suitable current rating of connecting units) for connection of Solar PV modules Array junction boxes and to inverters to Main Switch 5 Supply and fitting of ACDB and DCDB box to connect the solar modules with the inverter and distribution to the grid 6 Distribution wiring in 10 sqmm single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by ElC) in 20mm size PVC rigid conduit FR (Precision make) includingnecessary fittings as required 7 S&F Lightning Conductor Air-terminals made of 15 mm dia 1500 mm long Gl pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1) 8 Supplying & fixing earth bus bar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required 9 Connecting the equipment body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipment with incl. drilling holes, bolts, nuts, washers etc. 10 Supply fitting and fixing of display board at site 11 SGST @9% 12 CGST @9% 13 CESS @ 1%

Refer document

INR 82837.0 /-

INR 41.41 Lakhs /-