Tender For Supply, installation, testing & commissioning Of Cctv, Epbax And Lan Related Work In Under Construction Court Complex At Supply, installation, testing & commissioning Of Cctv, Epbax And Lan Related Work In Under Construction Court Complex At Khetri Distt. Neemkathana - 1 Providing & Fixing of ISO certified company made virgin material PVC trunking systemas per PWD specification for electrical Works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . The trunking system shall haveadaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. OEM shall have submitNABL accrediated /CPET lab test reportsbefore execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 2 32mm X 20mm 3 80mm x 50mm 4 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 5 Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS, FR Grade halogen free material with provision for protection against dust in jack, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 6 Cat 6, Un-sheilded Information Outlet 7 Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture ,material should bePC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 8 Single Aperture 9 Dual Aperture 10 Supply, Installation, Testing and Comissioning of Rack mounted 19 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panelswith Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 11 Modular Patch Panel Loaded with Cat -6 I/O 12 Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 13 Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord 14 1 Mtr 15 Supply & Installation of IP-20 & IK-08 , UL ListedWall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with UMarking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. Accessories like: 1 No of 19 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastneretc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 16 6 U Rack with Width 600 mm &Depth 400 mm + 100 mm 17 15 U Rack with Width 600 mm & Depth 400 mm + 100 mm 18 Supply , Installation, Testing and Comissioning ofManaged Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 19 Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent PoE Giga Ethernet Switch providing 24 x 10/100/1000 MBPSPoE Giga Ethernet ports and with min 4 SFP Giga Ports (provision for Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with minimum 370 Watt PoE Power Budget with related LAN Base Software including making connections etc as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 20 SITC ofIR IP Based 5MP Dome camera : 1/2.8 Progressive CMOS, ICR,IR, 2560(H)x1920(V):25fps(P) , 2.8/3.6 mm lens (As per site requirement) H 264,H265/MJPEG, dual-stream, 120dB WDR or better, 3D DNR, BLC, IR: minimum 30 mtr, Provision for Support on-board storage up to 256 GB (SD card not included),intrusion detection, Line crossing detection, Motion detection, Dynamic analysis, Alarm should be trigger on (Tampering alarm, Network disconnect, IP address conflict, Storage exception), security feature such as (password protection, privacy mask, watermark, IP address filtering, anonymous access), Open standard to support ONVIF (PROFILE S, PROFILE G),Metal Housing, Vandal-proof housing IP 67, DC 12V & PoE, Complete with Junction box for cable management Oerating Conditions : 20 °C - 50 °C or better. Model should be : CE, BIS,/UL,FCC,ROHS compliance.The CCTV OEM should have CMMI Level 5 or above or equivalent setup certification. The CCTV OEM should have its office and service/ support center in RajasthanAll as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR 21 SITC of IR IP based 5 MP Bullet Camera5 MP , Video Resolution:2592(H)x1944(V) Pixels , 1 to @25 fps; Image Sensor: 1/2.8-inch CMOS; Built in Infra-Red: 40 to 50 mtr; High Dynamic Range- 120 dB WDR; Lense- 2.8/3.6 mm, ;H264,H265/MJPEG , provision for Support on-board storage up to 256 GB (SD card not included) , intrusion detection, Line crossing detection, Motion detection, Dynamic analysis, Alarm should be trigger on (Tampering alarm, Network disconnect, IP address conflict, Storage exception), security feature such as (password protection, privacy mask, watermark, IP address filtering, anonymous access), Open standard to support ONVIF (PROFILE S, PROFILE G),Metal Housing, Vandal-proof housing IP 67, DC 12V & PoE, Complete with Junction box for cable management Oerating Conditions : -30°C to + 70 °C or better.Onvif Profile S,G,Confirmant;Model should be : CE, BIS,/UL,FCC,ROHS complianceThe CCTV OEM should have CMMI Level 5 or above or equivalent setup certification. The CCTV OEM should have its office and service/ support center in RajasthanAll as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR 22 Supply, Installation, Testing & Commissioning of 32 ch NVR Pre-licenced, NVR supports upto 40 TB HDD Support, 32 ch IP inputs; ; Support ANR technology; 320mbps incoming bandwidth, supports up to 12MP full channel recording; support H.265 compression; 16ch syncronised playback @1080p; support 3rd party cameras ONVIF type; 4K output; minimum 04SATA HDD Slots; each slot should suppport upto 10TB HDD; Dual gigabit self adaptive Ethernet interface; serial interface; USB interface; (all cameras and Storage-NVR should be of same make for the smooth functioning of the system).complete with mounting accessories & junction box (to be provided by OEM) for cable management. Model should be : Certificates of Compliance: UL, CE/FCC, BIS. The CCTV OEM should have CMMI Level 5 or above or equivalent setup certification. The CCTV OEM should have its office and service/ support center in RajasthanAll as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR 23 Supply, Installation, Testing & Commissioning of of 3.5 6 TB SATA ,USB 3.0 Surveillance Hard Disk .All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR 24 SITC of 8 portGiga PoE Switch with dual uplink :unmanaged PoE switch; 8X10/100/1000 mbps Base-T PoE; 2*10/100/1000 Base-T (Uplink) or2*1000 Base-X (uplink); PoE Power Consumption per Port:≤30W;power budget: minimum 96 W; PoE Protocols: IEEE802.3af,IEEE802.3at; Switching Capacity: 20 Gbps or better; MAC Table Size 2K or better; Working Temperature: -5°C~55°C; Power supply: DC48~57V Certificate of compliance:CE/FCC. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022. 25 Supply, Installation, testing and commissioning of BIS compliance Professional series Diagonal Screen size 55LEDwith Resolution 3,840 x 2,160 (4K UHD) with 500 nits brightness along with Static (Panel) Contrast Ratio (1300:1) or better with viewing angle of 178/178 degree with response time of 8ms along with HDMI In 2.0 - 2 nos., USB 2.0-2 nos., RS 232- 1 nos., RJ 45- 1Nos. with Built in Speaker(10W + 10W) , with high speed processor and android or other reputated operationg system along with 8 GB RAM along with all audio and video decoder, Stand-by / sleep / off mode power 0.5 watt, Continous Working Time minimum 15 hrs X 7 days .All as per pre- approved by Engineer- in- charge. For additional technical parameters of products / work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022. 26 Supply, Installation, Testing & Commissioning of5 KVA True On Line IGBT based Double Conversion Single Phase UPS having Over Load, Over Current & short circuit protection with 30 minutes battery backup including required MAH SMF inbuilt battery system. The UPS must be having Robust design, Wide input voltage range: 160~300VAC @ 100% load (linearly derating to 50% load @ 100VAC input). Compatible with Wide Input voltage windowDouble Conversion Efficiency >91% & ECO mode efficiency up to 98%100% load @ 0~40C operating temp.Active Input Power Factor Correction 0.99O/P power factor 0.9Inbuilt OVCD (Over Voltage Cut-off device), Fully conform coated PCBA adaptable to harsh environment,Offer terminal blocker on 2K/3K rating to connect to big capacity equipment, Digital Charger Technology to provide 02-10 A charging current,Easy understanding LCD for convenient installation setup. UPS must be equipped with required MAH SMF batteries (with MS stand for housing SMF batteries) to supply30 minute battery back up at full load along with required cabling for incoming & outgoing connection .All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022. 27 Supply, Installation, Testing and Comissioning of Rack Mountable IP EPABX System With Hardware Platfrom for unified communication Server which shall comply IP at its core , 100% Non Blocking configured for 192 Extension Analog Extension lines with 8 CO incoming lines (a number of physical lines connecting the PBX with the public telephone network) , 32 Digital Ports, & With ISDN Wired PRI line & System should be Expandable Upto 896 Ports in Future. It should have built-in participant’ conference. Thesystem should be supportive to Unified commuication system e.g. iP, Digital, Analog, cordless, wifi, mobile extn., Web videos etc. Also feature likeVIP caller priority routing that reduces wait time and improves service levels, Optimal call management through a customizable, intutive user interfaces, return call to orignal caller, caller back on missed call, must be there. All as per approved by Engineer in charge. For additional Technical Parameters of Products / Work , REFER ANNEXURE A ATTACHED WITH PWD ELECTRICAL BSR 2022 28 Supply,Installation Testing and Commissioning of Corded Landline Phone with numerical Key Pad, CLI (Caller Line Identification) 3-line display for callers number, time and day,30 incoming calls and 5 outgoing calls memory storage. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022. 29 Supply, Installation Testing and Commissioning of Digital Phone with 24 Programmable Keys along with monochrome 168 x 58 Graphical LCD display, 12-button (fixed) version, 24-button version (up to 32 with key extension unit, Backlit LCD & keypad, Multi-colour (7) Message Waiting Indicator, Tilt ange (5 steps), Hands-free, full duplex, Soft keys / LCD prompts, Wideband audio support. Digital phone must be compatible to be configured with IP PBX system . All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022.
