|
| 1 | Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqmon plan not exceeding 1.5 metre in depth and getting out in soft/loose type of soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/ loose type of soil complete all as specified and as directed. |
| 3 | Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point complete all as specified and as directed. |
| 4 | M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified and as directed. |
| 5 | M & L Sand cushioning to PVC under ground cable with tibbasand and punning to provide a required cover complete all as specified and as directed.Mnote: Punned thickness of sand shall be measured and paid for sand used in cushioning to cable. |
| 6 | M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armoured, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and as directed :- |
| 7 | 70 sqmm,3 1/2 core |
| 8 | 25 sqmm,4 core |
| 9 | 16 sq mm, 4core |
| 10 | Supply, fixing & install Steel tubular swagedpole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified for type 410 SP-31, 9.0 metres long complete all as specified. Note: The portion above coping shall be painted in alternative bands of Red & white colour starting with red colour (each band of 30 cm wide) by two coat of synthetic enameled paint upto 1.5 meter height and numbering properly complete all as specified and as directed.Note: PCC for foundation and coping work shall be measured and paid for separately. |
| 11 | M & LPCC (1:3:6) type C-2 using 40 mm graded stone aggregate for foundation/ pedestal of stay assembly / struts / poles etc complete all as specified and as directed. |
| 12 | M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work complete all as specified and as directed. |
| 13 | Dismantling old existingroad light any type, Supply and fixing of New Generation Energy Saving LEDstreetlight: indus-E Series top opening 90 watt, powder coated PDC aluminiumhousingwith integrated lens Polycarbonate cover,SMD LED with integrated lens cover body with toughened glass, IP 66 protection complete all as specified and as directed. |
| 14 | Supply and fixing GI pipe bracket 40mm dia medium grade,size 1.5 meter long, single swan neck shape suitable to fix on top of tubular pole complete with nuts, bolts and washers etc complete, including two coats of aluminium paint complete all as specified and as directed. |
| 15 | Supply and fixing of thermoplastic, polystyrene unbreakable junction box , size 217 x 253 x 115 mm suitable for pole mounted outdoor type IP 65 insulated complete with FI clamp & nut, bolts, washers and including phase seperator between R, Y, B terminals and including one MCB SP 6 amp 10 KA, all duly mounted on din channel, cable glands for cable entry complete all as specified and as directed. |
| 16 | Supply, install, testing and commissioning and testing factory made and tested (including CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted,compartmantalised and IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of 40x40x6mm angle iron , powder coated, having front and rear openiable hinged double door shuters with aprons for cable entryand locking arrangement complete all as specified and as directed including followings: -Incoming(a)MCCB 63 amps, 4 pole, 25 KA with adjustable thermal release, 50 Hz, 415 volts grade - 01 No. (b)Digital volt and ammeter with selector switch and CT\"s set - 01Set. (c)LED Neon indicating lamps (R, Y & B) -01 Set.(d) Bus bar electrolytic grade copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 100 Amp, 4 pole, not less than 50cm longfor incoming - 01 set.Outgoing(a) 03 PhaseTime switch electronicdigitaltype complete - 01 No(b)MCCB 32 amp, 4P 16 KA 415 V - 01 Nos.(c)D-21 astrorex time switch- 01 No.(d)FP 32 amp contactor - 01 No.(e)MCB 32amp SP \"B\" curve- 01 NoNote- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work. (ii) Panels shall be placed above 0.45 meter from ground level(iii) Outgoing Cables shall be fed with solid busbar connectors.(iii) Cables shall be terminated using gun metal /SS glands. |
| 17 | S & Fof 1100 volts grade heavy duty cable PVC insulated copper conductor cable three core inner sheathing of PVC tape and overall PVC sheathed in service connection three core stranded copper conductor of size 1.5 Sqmm drawn through steel pole from junction box to street lightfitting, complete all as specified and as directed. |
| 18 | Supply and laying of GI pipe, size 40 mm bore medium grade fixed on poles, to walls and ceiling or laid in floors with all fittings for cable protection all as specified and directed. |
| 19 | Labour for Boring holes under road/drain by manual/machine method for insertingGI tubing up to 80 mm dia for cable protection complete all as specified and as directed. |
| 20 | Dismantling of old existing pole of any type/size complete all as specified and as directed. |
| 21 | Dismantling old existing ACSR conductor of any type/size complete all as specified and as directed. |
| 22 | Dismantling old existing MS cross arms of any type/shape complete all as specified and as directed. |
| 23 | Dismantling old existing Insulators of any type/shape complete all as specified and as directed. |
| 24 | M&L earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pitdepth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel.Earthing strip shall be protected by galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GImedium grade.The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete. NOTE:- (i) The concrete pit shall be made in PCC 1:2:4 type B-0, using 12.50 mm graded stone aggregate (ii) 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded stone aggregate with suitable MS handle. Reinforcement in cover shall be of 8mm dia TMT bars laid @150mm c/c both ways.(iii) Quoted shall include the cost of 7.5 metre GI pipe for protection of earth wire/strip.(iv) Quoted shall include cost of 7.5 metre earth lead wire/strip.(v) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides |
| 25 | Taking down old deteriorated/U/S LT Panel of any type /size of any make |
