Tender For Rate Contract For Removal Of Leakages Under Sub Div Urban Nokha - 1 Removing Of Leakages 2 Repairing Of Leakage In Existing Distribution/Rising Main/Transmission Main Ac/Pvc/Hdpe Pipe Lineup To 1.5 Mtr Depth Of Sizes As Given Below By Diggi, bikaner-Rajasthan

Tender For Rate Contract For Removal Of Leakages Under Sub Div Urban Nokha - 1 Removing of Leakages 2 Repairing of leakage in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE pipe lineup to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost) 3 In all type Soil AC/PVC/HDPE pipe 4 50/63/75mm 5 80/90mm 6 100/110mm 7 125/140mm 8 150/160/180mm 9 200/225mm 10 250/280mm 11 300/315 mm 12 Add on above item no. 4 to 10 for B.T. Road- 5% 13 Add on above item no. 4 to 10 for C.C. Road. Pit in CC Road shall be cut in optimum size through CC cutter Machine only. - 15% 14 Minor repair of leakages such as lead caulking, plugging, clamping and ring fixing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site to make repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as lead wool, white hump, plugs, clamps etc. shall be provided by Department free of cost) 15 In all type Soil 16 50/63/75mm 17 80/90mm 18 100/110mm 19 125/140mm 20 150/160/180mm 21 200/225mm 22 250/280mm 23 300/315mm 24 Add on above item no. 15 to 21 for B.T. Road- 5% 25 Add on above item no. 15 to 21 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 26 Replacement of CI/ DI Double flange sluice valves,non return valves,butter fly valves etc. in existing Distribution/Rising Main/Transmission Main pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including providing and fixing MS Nut and Bolt and rubber gasket, dewatering and providing adequate safety arrangement at site andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as Valve, Tail piece, CID Joints etc. shall be provided by Department free of cost) 27 In all type Soil 28 80 mm 29 100 mm 30 125 mm 31 150 mm 32 200 mm 33 250 mm 34 300 mm 35 Add on above item no. 26-31 for B.T. Road- 5% 36 Add on above item no. 26-31 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 37 Removal of Choking from pipe line, including tree roots, malba, sand and otherby manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/uPVC pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit. 38 In all type Soil 39 75 mm 40 90/80 mm 41 110/100 mm 42 140/125 mm 43 180/160/150 mm 44 225/200 mm 45 250 mm 46 300mm 47 Add on above item no. 36-42 for B.T. Road- 5% 48 Add on above item no. 36-42 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 49 Work of Inter Connection in AC/PVC/HDPE pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost). 50 In all type Soil 51 80 mm to 110 mm 52 125 mm to 165 mm 53 200 mm to 300 mm 54 Add on above item no. 47-49 for B.T. Road- 5% 55 Add on above item no. 47-49 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 56 Labour charges for removal of complaint of polluted water supply to the consumers 57 Survey of the locality of polluted water supply for preliminary assessment of source of pollution during supply hours 58 Labour charges for digging of pit of suitable size for removal of water pollutiononexisting distribution AC/PVC/uPVC/HDPE pipe linesup to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault in pipe line byfixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. The rate includes all labour charges to complete the work for pipe size 59 In all type Soil 60 50 to 75 mm 61 80-110 mm 62 125 to 165 mm 63 200 to 300 mm 64 Add on above item no. 56-59 for B.T. Road- 5% 65 Add on above item no. 56-59 for C.C. Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only.- 15% 66 Removal of sluice valve in existing pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost) 67 80 mm dia pipe to 100mm 68 125 mm dia pipe to 150mm 69 200 mm dia pipe to 250mm 70 300 mm dia pipe to 350mm 71 400 mm dia pipe 72 Supplying and fixing of MS Rods for different sizes of sluice valveand should be supplied as according to size of old rods including material and finishing for the following sizes. 73 Sluice Valve Size 80mm 74 Sluice Valve Size 100mm 75 Sluice Valve Size 125mm 76 Sluice Valve Size 150mm 77 Sluice Valve Size 200mm 78 Sluice Valve Size 250mm 79 Sluice Valve Size 300mm 80 Sluice Valve Size 350mm 81 Sluice Valve Size 400mm 82 Supplying of Chuck Nut for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes. 83 Sluice Valve Size 80mm 84 Sluice Valve Size 100mm 85 Sluice Valve Size 125mm 86 Sluice Valve Size 150mm 87 Sluice Valve Size 200mm 88 Sluice Valve Size 250mm 89 Sluice Valve Size 300mm 90 Sluice Valve Size 350mm 91 Sluice Valve Size 400mm 92 Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes. 93 Sluice Valve Size 80mm 94 Sluice Valve Size 100mm 95 Sluice Valve Size 125mm 96 Sluice Valve Size 150mm 97 Sluice Valve Size 200mm 98 Sluice Valve Size 250mm 99 Sluice Valve Size 300mm 100 Supplying ofMS Rods and Chuck Nut (Complete Set) for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes. 101 Sluice Valve Size 80mm 102 Sluice Valve Size 100mm 103 Sluice Valve Size 125mm 104 Sluice Valve Size 150mm 105 Sluice Valve Size 200mm 106 Sluice Valve Size 250mm 107 Sluice Valve Size 300mm 108 Sluice Valve Size 350mm 109 Sluice Valve Size 400mm 110 Restoration of bitumen road by patch work of WBM using crushed / broken aggregate as per the standard specification and consolidation with hand rammer spreading and consolidation of binding material , cleaning of surface of WBM and providing of seal &tack coat as per site condition by using ready cold mixup to the satisfaction of engineer in charge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job. 111 Restoration of cement concreteroad including making of pit in regular shape, ramming and consolidation of surface, laying, positioning and compactingcement concrete ( M-20 ) minimum thickness 200 mm upto the satisfaction ofengineer incharge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job.

INR 1000 /-

INR 20000.0 /-

INR 10 Lakhs /-