Tender For Electrical Items Repair - Rewinding Of Ceiling Fan Motor (Starting And Running Winding) Including All Necessary Material. The Motor Is To Be Wound Taking No. Of Coils, Turns And Pitch As It Was Originally Wound With Required Size Super Enamel, Jhalawar-Rajasthan

Tender For Electrical Items Repair - Rewinding of ceiling fan motor (starting and running winding) including all necessary material. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with E class insulation material and making connections etc. as required. (New model ceiling fan) 900/1200 mm sweep Rewinding of Heavy duty Exhaust fan motor including all necessary material. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with E class insulation material and making connections etc. as required. 300/380 mm sweep 457 mm sweep 600 mm sweep Rewinding of 400 mm table fan/pedestal fan motor including all necessary material. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with E class insulation material and making connections ete, as required. Rewinding of single phase motor of 1400 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire E class insulation material and testing etc. as required. 0.25 HP. To 0.50 11.P. 0.75 HP. To 1.0 H.P 2.0 H.P Rewinding of three phase squirrel cage induction motor of 1400 to 3000 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire E class insulation material and testing ete, as required.(open well. submersible pump) 2.0 11.P., 1-0 3.0 H.P.. 1-0 3 H.P..3-0 5. 11.P..3-0 7.5 ILP.. 3-0 10. H.P.. 3-) 12.5.3-0 Providing & Replacement of M.S. Shaft of fan motor for Desert Cooler exhaust fan Providing and Replacement of ball bearing of ceiling/exhaust fan as required. (NBC SKF) Replacement of cooler pads (heavy) set of 3 no. of as size require Replacement of cooler pads (honey pad) set of I no. of as size require Providing plastic blade for desert cooler fan as required. Providing plastic blade for Exhaust desert cooler fan as required. Providing vertical pump suitable for desert cooler including making connection testing etc. as required. Providing of fan motor suitable for desert cooler including making connection testing etc. as required. Providing of fan motor (Exhaust) suitable for desert cooler including making connection testing ete as required. Providing and replacement of heating element of blower type heat convector. As required. Providing and replacement of heating element rod of radiation type heat convector as required. Providing of capacitor of 230V/ 275V. 50112 rating of as require 4.0 micro-farad 6.0 micro-farad 8.0 micro-farad 10.0 micro-farad Labour charges for installation of submersible motor pump set including lowering/ delowering of pipes, cables, accessories ete. in tube-well/open well complete including T&P, transportation of tripod, chain pulley block & any other material required for this purpose. Lowering only Delowering and Lowering Providing of synthetic rope for submersible pump ISI marked (18:5175) of following sizes. 14mm (suitable up to 50 mm OD pipe) SITC of radial mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe. G.I. H.D.P.E. pipe with rope. cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains. complete in all respect 10.0 HP. 3-0, (64-104)Mtr. (400-167)LPM 7.5 HP, 3-0. (45-73)Mtr. (400-280)LPM 5.0 11P. 3-0, (32-52)Mtr, (400-167)LPM 3.0 IP. 3-0, (33-90)Mtr, (166-60)LPM 2.0 HP, 1-0. (18-51)Mtr, (180-60)LPM SITC of ISI mark open well monoblock pump set of approved make, TEFC. permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal. 2880/3000 RPM. single phase three phase including cost of hardware ete on existing well. Pump shall have following HP Rating, phase. Head, minimum Discharge respectively. 5 HP. 3-0, (10-55) Mtr. (2200-2001.PM 2 HP. 1-0, (8-30)Mtr. (910-70)LPM 3 HP. 3-0, (8-30)Mtr. (910-70)1.PM 311P, 3-0, (8-30)Mtr. (910-70)LPM Supply and fixing of oil Air break DOI. Star Delta Starter made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit and single phasing protection, ON/OFF push buttons, ammeter, voltemeter indicating lamp etc. complete in all respect suitable for following rating motors. For single phase Submersible/Monoblock pump 0.5 HP to 3.0 HP For Three phase Submersible Mono block pump 3.0 HP to 10.0 HP (DOL) 12.5 HP (Star/Delta) Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & mono block pump) with required fittings 40 mm OD 6 kg/cm2 50 mm OD 6 kg/cm2 Provide Laying ISI marked PVC. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection ete, as required. 6.0 Sq.mm 3 core flat Round 10 Sq.mm 3 core flat Round Provide of power supply cable for (multipara monitor, ventilator, eeg machine ete) 5 Mtr 3Mtr

Refer document

Refer document

INR 5 Lakhs /-