Supply Of Dewatering Machinery, Eot, Air Valve, Non Return Valve, And Accessories At Anand Nagarpalika (Second Trial)-1 SUBMERSIBLE SEWAGE NON-CLOG VERTICAL PUMP Supply, Installation, Testing and Commissioning of sewage submersible, Non clog type suitable for working on Three phase, 50 Hz +/-3%, 415V +/- 10%, AC supply, 1450 RPM synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set & following M.O.C: Casing CI, SS CF8M impeller, Bronze: wearing ring & Bearing bush, TC mechanical seal, CS/S.S.bearing, S.S shaft with sleeve, SS strainer & MS motor body. 1HP 2HP 2 Control Panel board DOL/Star Delta starter suitable for local and remote pump control application consisting of MPCB, overload relay and contactors as per type II coordination including digital volt meter, analogue ameter with selector switch, run hour meter, required protective relays and control accessories. D.O.L. upto 3HP 3 Cable Supply, laying, testing and commissioning 1.1 kV grade, XLPE insulated, stranded copper conductor, galvenised steel flat strip/round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps/in existing cable trench/cable trays/conduit/pipe sleeves at road crossing or floor as per site requirement) confirming to IS:7098 9part-1) & IEC:60502 (Part-1) of following sizes 4.0 core x 10 sqmm 4 EOT Supply, installation, testing & commissioning single girder type fully electrically operated EOT crane with electrically operated hoist, class II duty, geared travelling trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety device, cables form motor to starter panel & other required accessories & tested as per IS Specifications. Capacity - 5T , Span- 9 to 12m , Long Travel - 12m, Lift - 6 to 10m 5 Specials Manufacture, supply and delivery of DI flange, socket, spigot, bends, tees, reducer or any other special as per BS-EN-545/1995 class A series K12 suitable to use with DI pipes manufactured as per IS 8329/1994. delivery of specials is to be made to store or site of works anywhere in Anand including all taxes, loading, unloading, carting, stacking, insurance, inspection charges octroi etc complete. 6 Non Return valve Providing and supplying C. I. D/F Reflux valves as per IS 5312 (Latest Edition) of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. Reflux valves PN 1.6 IS 5312 with ISI Mark 150mm 7 Air Valve Providing and supplying C. I. Air valves of approved make & quality of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. Kinetic Air Valve 100mm 150mm
