Tender For Major Repair And Painting Work Of Block Development Officer Office In Block 1 - Dismantling Cement Concrete Or Brick Work Or Granolithic Floors, Including Base Concrete And Including Stacking Of Dismantled Material As Directed By Engineer Incha, Aligarh-Uttar Pradesh

Tender For Major Repair And Painting Work Of Block Development Officer Office In Block 1 - Dismantling cement concrete or brick work or granolithic floors, including base concrete and including stacking of dismantled material as directed by engineer incharge within distance of 60 mtr ( 200 ft ) as per S.I No 697. 2 Dismantling existing plaster ,including disposal ofrefuse as directed by engineerincharge within a distance of 60.00 mtr ( S.INo706) 3 Dismantling door & window , chowkhats with hold fast including stacking of dismentled materials as directed as directed by engineerincharge within a distance of 60.00 mtr ( S.INo703) 4 Raking out joints of brick work in cement mortar in depth of 1 cm (3/4) including disposal of refuse as directed by engineer incharge within a distance S.INo 707. 5 Providing and laying in cement concrete 1:6:12 ( 1 cement : 6 c/sand : 12 graded brick aggregate to 40 mm nominal size ) including labour and T & P etc required for proper completion of the workand curring complete also including cost of form work in foundation and floor as per S I No 275. 6 12 mm thick monolithic plaster with cement and c/ sand of 2.25 F.M mortar over plinth above in1:6including supply of all material labour T & P etc required for proper completion of the work as per SL No 13.4.1 7 2.50 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm ( 3/4) graded approved approved stone grit laid in panels finished with 3 mm floating of neat cement or cement and morble dust in 5:1 as specified over and without base including supply of all material , labour T & P etc required for proper completion of the work as per SI No 600 8 Providing and applying white cement based putty of average thickness 1 mm of approved bond and manufacturer over the plastered wall surface even and smooth surface as per D.S.R -13-80 9 Finishing wall with Premium Acylic smooth exteriorpaint with silicon additive of required shade on new work ( two or more coat applied @ 1.43 ltr / 10 sqm over and including priming coat of exerioir pimer applied @ 2.20 kg / 10 sqm as per D.S.R No 13.47.1 10 Painting and varnishing new iron work in small areas of new wood work with two coat of ready mixed primingpaint and one coat of approved supiriour quality readymixed enamel paint of varnish including sand papering , rubbing and cleaning the surface and supplyof all material , labour and T&P required for proper completion of the work ( the paint to be used should confirm to I.S I 103-1950) 11 Supply and fixing of 35 mm thick flush door commercial quality confirming to I.S 2202 Part 1 ( 1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges , bolt , locks handles, spring fitting as per D.S.R 9.21.1 12 Providing and fixing of ISI marked M.S sliding bolt 16 mm dia nuts and 300 mm long with necessary screws etc complete as per D.S.R No 9.61.1 13 Providing and fixing Glass panes with putty and glazing clips in steel doors , window , clerestory windows all complete with 4 mm thick glass pan as per DSR - 10.30.1 14 Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C rain water pipe confirming to to IS:13592 type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap of terminal expantion as per DSR 12.41.12 Detail of cost for 6.00 mtr 15 Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS : 15622 ( thickness to be specified by the manufacturer , of aproved make , in all colours , shades except burgundy , bottle green , black of any size as aproved by engineer i/c in skirting , riser of steps and dadoes , over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slury @ 3.30 kg per sqm i/c pointing in white cement mixed with pigment of matching shade complete as per 8.31 16 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. as D.S.R - 11.40 . 17 Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc.complet as per schdule S.No.11.49.2 18 Providing and fixing white Vitious water coset squating pan( indiantype W.C Pan) with seat and lid , 10 litre low level white P.V.C Flushing cistern including flush pipe with manualy controlled device ( handle lever ) confirming of IS 7231 with all fitting and fixtures complete i/c cutting and making good the wall and floor wherever required . 19 Providing and fixing wash basin with C.I Braket 15 mm C.P Brass piller tape 32 mm C.P Brass waste of standered pattern , i/c painting of fitting and bracket cutting and making goods and walls wherever required white vitous china flat back wash basin size 550 x 400 mm with single 15 mm C.P Brass piller tap as per D.S.R - 17.7.4 . 20 Providing an*fixing Chlorinated Polyvinyl Chloride.(CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cement ard the cost of cutting chases and making good the same including testiang ofjoints complete as per direction ofEngineer in Charge. Concealed work including cutting chases and making good the walls etc. l5mm dia nominal outer dia pipes SI No 18.7.1,2,3 :- A. 25 mm Nominal dia Pipes 21 B. 20 mm Nominal dia Pipes 22 C. 15 mm Nominal dia Pipes 23 Providing and fxing C.P. brass Long Nose bib cock of approved quality. Conforming to IS Standerd and weighing not less than 810 gms. 15 mm dia Nomonal bore SI.No 18.50.1 24 Providing and fxing C.P. brass stop cock (concealed) of standard design and of approvedConforming to IS:8931 15 mm dia Nomonal bore SI.No 18.52.1 25 Providing and fxing C.P. brass angle value for basin mixer and geyser points ofapprovedquality Conforming to IS:8931 15 mm dia Nomonal bore SI.No 18.53.1 26 Providing and fxing brass bib cock of approved quality 15 mm nominal bore SI.No 18.15.1 27 Wiring points for light with 1.5 sq.mm. FR PVC insulated multistrand single core copper conductor cable in H.G.PVC conduit concealed in the wall with 14 SWG copper eath continity wire,piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backlite sheet etc complete in all respect as directed including matching colour wah as per SI.No.131(c). 28 Supply of Unskilled labour for Cleaning of block campus & Tree Cuttingincluding up rooting of trunk vegetation grass i/c all complete. 29 Dismantling cement concrete or brick or granolithic floor & plaster including stacking of dismantled material as directed by Engineer in charge with in a distance of carted up to 3.00 km 30 Supply and fiixing of 2 feet x 2.50 feet Inagurationpiller of granite i/cengraving of letter up to 250 words and also making of padestal with foundation and brick work as per engineer i/c all.

INR 1120 /-

INR 100000.0 /-

INR 10 Lakhs /-