Tender For Advance Earthworks And Enhanchement Wokrs At Range Tonk / Uniara - Advanced Soil Worksurvey Of The Area, Layout (Dagbel) Includingcleanliness Of Demarcated Line.(2.1.1 Ccf Ajmer ) 2 Advanced Soil Worklayout For Excavation Of Trenches Or/ V.Di, Tonk-Rajasthan

Tender For Advance Earthworks And Enhanchement Wokrs At Range Tonk / Uniara - Advanced soil workSurvey of the area, layout (dagbel) includingcleanliness of demarcated line.(2.1.1 CCF Ajmer ) 2 Advanced soil workLayout for excavation of trenches or/ V.Ditches/Gradony or Contour Dykes or furrows.(2.1.3 CCF Ajmer) 3 Advanced soil workLayout for excavation of pits ( 2.1.2 CCF Ajmer) 4 Soil work:- Digging of pits (size 0.45 x 0.45 m x 0.45 m or (0.50+0.40)/2 X 0.45 cubic meter(2.6.1.4 CCF Ajmer) 5 For the following works carried out by mechanical means (JCB) rates will be as:New ditch fencing excavation:-1.2 meter deep, 1.5 meter wide at top and 0.90 wide at bottom (1.44 cum) dug out 3000 Rmt. size 1.5+0.9/2 x 1.20 = 1.44 (3.29.1.4 CCF Ajmer) 6 Digging of trenches (size 45cm x 45 cm)and separating stones from dugup soil and making mounds of the soilHard clayey Soil more than 20% boulders 20000 Rmt (2.7.1.4 CCF Ajmer) 7 Cutting and burning cacti and thorny bushes 200000/100 (3.30.4 CCF Ajmer) 8 Earthwork for bund/embankment in dry or moist soil with the help of tractor attached with scraper including laying in layers of 15 cm breaking of clods, sorting of grasses, pebbles etc and dressing in required profile when compacted manually within initial need of 30 m and lift of 1.50 m rate of tractor (35 – 40 HP) with POL & scraper (excluding charges of watering and compaction )in hard soil (6.2.1.2 CCF Ajmer) 9 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.(1.31 CCF Ajmer) 10 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil (1.6 CCF Ajmer) 11 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (3.1.6 CCF Ajmer) 12 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in. foundation ratioCement Mortar 1:6 ( 1-Cement : 6-Sand)(6.1.6 CCF Ajmer) 13 Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in. superstructure ratioCement Mortar 1:6 ( 1-Cement : 6-Sand) (6.2.6 CCF Ajmer) 14 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (5.2.2 CCF Ajmer) 15 Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : (3.8 CCF Ajmer) 16 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 25 mm thick. (12.2.1 CCF Ajmer) 17 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red (9.8 CCF Ajmer) 18 Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding. PILLAR and CATTLE GUARD HUT - details of all the works carried out in the plantation site should be written on the pillars as per directions given by the site incharge (12.36 CCF Ajmer) 19 Supply and installation of Multi Rib Proofing/cladding Sheet Manufactureout of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminumalloy coated galvalume steel (as per 150gsm zinc aluminum coated 550Mpatuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens30mm high NB at 250 centre and centre width of 1020mm sheets be castedwith regular modified polyster system on a continuous with line on centrefor face and with a polyster coating respectively sheet shall haveproportionality with siphoned plate made to prevent leakage sheet shall befixed by more of sell drilling lift tapping hot dip zinc coated hox headfasterner of size 12x14x55mm long. The sheet shall be supplied in cost onelength and for a minimum up to 12mts with all scaffolding. (17.1 CCF Ajmer) 20 Advanced soil workSurvey of the area, layout (dagbel) includingcleanliness of demarcated line. (2.1.1 CCF Ajmer) 21 Advanced soil workLayout for excavation of trenches or/ V.Ditches/Gradony or Contour Dykes or furrows. (2.1.3 CCF Ajmer) 22 Advanced soil workLayout for excavation of pits (2.1.2 CCF Ajmer) 23 Soil work:- Digging of pits (size 0.45 x 0.45 m x 0.45 m or (0.50+0.40)/2 X 0.45 cubic meter (2.6.1.4 CCF Ajmer) 24 For the following works carried out by mechanical means (JCB) rates will be as:Repair of ditch fencing.After complete filling up,re digging ditch fencing 2777 Rmt. size 1.5+0.9/2 x 0.93 = 1.11 ( 3.29.1.4 CCF Ajmer) 25 Digging of trenches (size 45cm x 45 cm)and separating stones from dugup soil and making mounds of the soilHard clayey Soil more than 20% boulders 17500 Rmt 26 Cutting and burning cacti and thorny bushes 200000/100 ( 3.30.4 CCF Ajmer) 27 Earthwork for bund/embankment in dry or moist soil with the help of tractor attached with scraper including laying in layers of 15 cm breaking of clods, sorting of grasses, pebbles etc and dressing in required profile when compacted manually within initial need of 30 m and lift of 1.50 m rate of tractor (35 – 40 HP) with POL & scraper (excluding charges of watering and compaction )in hard soil ( 6.2.1.2 CCF Ajmer) 28 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. ( 1.31 CCF Ajmer) 29 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil (1.6 CCF Ajmer) 30 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (3.1.6 CCF Ajmer) 31 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in. foundation ratio Cement Mortar 1:6 ( 1-Cement : 6-Sand) (6.1.6 CCF Ajmer) 32 Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in. superstructure ratio Cement Mortar 1:6 ( 1-Cement : 6-Sand) (6.2.6 CCF Ajmer) 33 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (5.2.2 CCF Ajmer) 34 Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification :(3.8 CCF Ajmer) 35 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 25 mm thick. (12.2.1 CCF Ajmer) 36 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red(9.8 CCF Ajmer) 37 Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding.PILLAR and CATTLE GUARD HUT - details of all the works carried out in the plantation site should be written on the pillars as per directions given by the site incharge (12.36 CCF Ajmer) 38 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvalume steel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm sheets be casted with regular modified polyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate made to prevent leakage sheet shall befixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and for a minimum up to 12mts with all scaffolding. (17.1 CCF Ajmer)

INR 1000 /-

INR 341471.0 /-

INR 1.70 Crore /-