Construction work of public toilet near Kasam Antar College in Gram Panchayat Mitauli - Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out anddisposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge 2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidatingand dressing complete. 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level :1:5:10 (1 Cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mmnominal size derived from natural sources) 4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundationand plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level :1:5:10 (1 Cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mmnominal size derived from natural sources) 6 RCC work in plinth beamwith 1:1.5:3 cement, c.sand and 16-20mm stone grite etc in plinth beam all comp. of work. 7 RCC work in lintel with 1:1.5:3 cement, c.sand and 16-20mm stone grite etc .all comp. of work.DSR2023,5.3Lintel 8 RCC work in slab with 1:1.5:3 cement, c.sand and 16-20mm stone grite etc .all comp. of work. DSR2023,5.3Slab 9 Centering and shuttering including struting ,proping etc and removal of form for roof DSR2023,5.9.20 10 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) 11 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) 12 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position andbinding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 13 12 mm thick plaster with1:4 cement & c.sand morter T&P etc.all comp. of work.(A) Inner face(B) Outer face 14 Providing and applying white cement based putty of average thickness 1 mm, of approved brandand manufacturer, over the plastered wall surface to prepare the surface even and smoothcomplete. DAR2023,13.80 15 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finishedwith a floating coat of neat cement, including cement slurry, but excluding the cost of nosing ofsteps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 16 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.DAR2023,10.25.2 17 Fabrication of grill with frameincluding all completion of work.DAR2023,10.25.2 18 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness tobe specified by the manufacturer ) of approved make in all colours, shades except burgundy,bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of stepsand dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointingwith grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed withpigment of matching shade complete.DAR2023,11.37A 19 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters:DAR2023,9.21.2 21 12mm thick Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 22 Painting with synthetic enamel paint of approved brand and manufacture of required colour togive an even shade : 23 Finishing of wall with two coat of waterproof cementpaint of snocem with one coat primer. Pwd sor 660+661 24 one prime coat & two coat of oil bound distemper on new work incl. supply of all material labour T&P etc DSR2023,13.41.1 25 Providing and fixing on wall face unplasticized rigid pvc rain water pipe. 26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. inlayers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50 m and lift upto 1.5 m.DSR2023,2.25 27 Providing and fixing chlorinated polyvinyl chloride(CPVC) pipes,having thermal stability for hot and cold water supply,Including all CPVC plain and brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.DSR2023,18.8.3 28 Providing and fixing chlorinated polyvinyl chloride(CPVC) pipes,having thermal stability for hot and cold water supply,Including all CPVC plain and brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.DSR2023,18.8.1 29 Providing and fixing on wall face unplasticised PVC moulded fitting /accessories etc. 110mm bend DSR2023,12.42.5.2 30 P/f of CP brass bib cock of approved quality . 31 P/F of sliding door bolt 250 mm long and 16 mm dia 32 P/F of tower bolt 150 mm long and 10 mm dia 33 P/F of handle 100 mm long dsr 34 Santary work and septic tank. 35 Electrification Work 36 s/f submersible pump etc all comp. 37 P/F white china flat back urinal pot includig all comp. of work dsr 17.23 38 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 39 Laying brick soling layer on prepared sub-grade with brick onedging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing as per Technical Specification Clause 412 40 S/F marble sign board etc. all completion of work
