Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-01-2025 | Corrigendum 2 | Other | 07-01-2025 |
| 2 | 01-01-2025 | Corrigendum | Other | 07-01-2025 |
| Sl. No. | Item Description |
| 1 | Part A |
| 2 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 3 | Short point (up to 3 mtr.) |
| 4 | Medium point (up to 6 mtr.) |
| 5 | Long point(up to 10 mtr.) |
| 6 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 7 | On board |
| 8 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 9 | 20 mm |
| 10 | 25 mm |
| 11 | S&F following sizesof ISI marked ( IS:14927 P - II ) virgin materialUPVC trunking along with accessorieslike coupler, inner, outer, elbow, square box, tee, end cap etc. on surfacewithscrews, expansionfastenersas required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 12 | 25 mm x 12 mm |
| 13 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 14 | 3x 1.5 sq.mm |
| 15 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 16 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 17 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 18 | Single pole MCB (With B/C curve tripping Characteristics) |
| 19 | 6 A to 32 A rating |
| 20 | Triple pole MCB(With B/C curve trippingCharacteristics) |
| 21 | 50/63 A rating |
| 22 | Four pole MCB (With B/C curve tripping Characteristics) |
| 23 | 100 A rating |
| 24 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 25 | Metal door (single phase) IK-09 and IP-43 with Metal end box |
| 26 | 8 Way (8+2) |
| 27 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 28 | Metal door (Three phase) IK-09 and IP-43with Metal end box |
| 29 | 4 Way |
| 30 | Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box withprovision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing ,made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with insulated 100 A rating copper bus bar, neutral bars with shrouds, earth bar , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 31 | Double door IK-09 & IP-43 with Metal end box |
| 32 | 4 Way(8+12) |
| 33 | Providing & Fixing of single / multi tone electronic call bell as per PWD specification for electrical Works, including making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 34 | Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonatewith brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,minimum width ofswitch toggle( PUSH PART ) should not less then 20mm,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 35 | 25 Amp.2 Moduleswitch With LedIndicator |
| 36 | Providing & Fixing of modular type lockable feature socket dulymade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 37 | 25 Amp. 2 Module Socket |
| 38 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 39 | 5 step fan regulator 2 Module 360 dgree rotating |
| 40 | Providing & Fixing offollowing size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 41 | 1/2 Module |
| 42 | 6 Module |
| 43 | 8 Module |
| 44 | Providing & Fixing ofWiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 45 | 1-2 Module |
| 46 | 6 / 8 module |
| 47 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 48 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 49 | 16.0 Sq. mm |
| 50 | 4 core |
| 51 | 10.0 Sq. mm |
| 52 | 4 core |
| 53 | 25.0 Sq. mm |
| 54 | 3.5 core |
| 55 | SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree,pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage690 V.provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 56 | 4 pole MCCB With Thermal Magnetic release |
| 57 | up to 100 Amp , 10 kA, fixed O/L & fixed S/C setting |
| 58 | Add Extra in item no. 11.1 to 11.4 for Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 59 | Up to 35 Sq.mm fixed with 25 mm x 2 mm thick suitable length red oxide and enamel painted MS clamp and base, pvc rawl plug and screws of sufficient size with spacing 0.6 Mtr. Between Clamps. |
| 60 | Supplyandinstallationofhigh tensile low carbon steel rod molecularly bonded with 99.9 % Copperthickness (250 microns) andconfirming toUL 467, IS/IEC 62561-2of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :- |
| 61 | (a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole |
| 62 | (b)filled with anti corrosiveconductivecompounds with the permanent sealings at both the ends, CPRI/ ERDAtested with RMS capacity of minimum 30 KA for withstanding 1 second .To ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 Kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. The compound shall be tested form NABL acredeated labfor lowresistivity ( less than 0.12 Ohm - meter ) & high conductivity in nature with carbon as a major contentas per referance of IS 3043-1987,IEEE 80-2013 (clause 14.5d) , IEEE 837 & IER 1956 with latest amendemnts |
| 63 | © Connect the rod with copper Strip/Conductor/Wire with suitable clamp made from tinned copper and SS 304 Bolt |
| 64 | (d) Place Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. |
| 65 | (d)Testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book. |
| 66 | (e) Test certificatesfor confirming above standards from OEM is mandatory. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 67 | 17.2 mm thick and 3 Mtr. Long |
| 68 | Supply & Laying following size earth stripin horizontal or vertical run in surface by means of Earth strip DMC Insulatorincluding riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 69 | 25mm x 5 mm Alum. Strip |
| 70 | Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 71 | 10 SWG G.I. ( Hot Dipped) Wire |
| 72 | Providing & Fixing ofof ventilating fans Capacitor start, copper wounded, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 73 | 250 mm sweep |
| 74 | Providing & Fixing of Heavy duty capacitor start, copper woundDouble ball bearing900/1400 RPM single phaseExhaustfan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 75 | 300 mm sweep(900/1400 RPM) |
| 76 | Providing & Fixing ofof Double ball bearing, copper wounded capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 77 | 225 mm sweep |
| 78 | Providing & Fixing of 450 mm SweepOscillating type Wall mounting / Pedestal typefans with Three speed, ON andOFF position, Sintered Iron bush oil impregnated,with metal front and back 120 or moreribs guard; Three no. Aluminiumblades, minimum Air delivery 100 Cum. / Minute , Minimum Service Value 1.11 Cum./min/watt, noise level should be <= 75 dB, power consumption <= 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 79 | Wall mounting type with Adjustable Vertical Angle |
| 80 | Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 81 | 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) |
| 82 | Providing & Fixing ofof M.S. J- hook of standard design made out of 16 mm dia. M.S. round bar and fixed withcement concrete mortar with required support as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 83 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminiumhousing with in built driver, System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 84 | 1170mm(+/-10%) LED batten with min. lumen output 2200 lm |
| 85 | Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / SqaureSMD Mid Power LED Downlight with power coated die-cast aluminum housingwith UV Stabilized non yellowish Diffuser withBIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. |
| 86 | OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 87 | Surface Mounting (with extruded alumn. Housing ) |
| 88 | Minimum lumen output 1950 lm |
| 89 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 90 | Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS, FR Grade halogen free material with provision for protection against dust in jack, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 91 | Cat 6, Un-sheilded Information Outlet |
| 92 | Supply, Installation, Testing and Comissioning of Rack mounted 19\" 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panelswith Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 93 | Modular Patch Panel Loaded with Cat -6 I/O |
| 94 | Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 95 | Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord |
| 96 | 1 Mtr |
| 97 | Supply & Installation of IP-20 & IK-08 , UL ListedWall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with \"U\"Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastneretc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 98 | 6 U Rack with Width 600 mm &Depth 400 mm + 100 mm |
| 99 | Supply & Installation of IP-20 & IK-08 , UL Listed Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet,Vertical Mounting Rail 1.6 MM with \"U\"Marking, front sturdy sheet steel frame folded from one piece and welded with 5mm toughened glass door, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, Set of 75 mm height 4 castors, 2 of which have brakes, Accessories like: 5 Nos of 19\" 1U Horizontal Cable manager, 2 Nos of vertical cable managers, 1 no. Keyboard Tray,4 Nos of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 2 No of 19\" 1U, mountable socket strips with 6 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 100 | 17 U Rack with Width 600 mm &Depth 800 mm |
| 101 | Supply , Installation, Testing and Comissioning ofManaged Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 102 | Supply and laying speaker cable of IS/ISO 9001 CERTIFIED COMPANY made following size 2 core twin twistedmulti stranded electrolytic grade copper conductor, overall PVC insulated and armoured cable (Blue colour) on surface/ above false ceiling including cost of GI spacers, saddles etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 103 | 0.75 sq.mm |
| 104 | Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002in existingsurface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 105 | 2 pair |
| 106 | Supplying and drawing coaxial cable 75 ohm impedance with foam PE insulated solid bare copper inner conductor, and Ist outer conductor of bonded alum. tape and second outer conductor ofalum. alloy braidin existingsurface or recessed conduit/casing capping including making connections as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 107 | RG - 6 |
| 108 | P & F Krone module with base framein the recess / surface made out of 1.2 mm thicksheet steel box, front openable, having locking arrangements duly powder painted,including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 109 | 10 Pairs |
| 110 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass coverand secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver& has a unique BIS R number withInput Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driverEfficiency >85%,THD(I) <10%Humidity 10% to 90% RH Working Temp -5C to 45C .driver current <750mA. The luminaireshall be BIS certified and Trade mark certified. Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs.Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 111 | LED Street Light fixture with Minimum lumen output 11225 lm |
| 112 | Providing & Fixing of Street light bracket made out from following size of \" B \" class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with heavy duty pole clamp, Saddles suitable fastners etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 113 | 32 mm Dia. |
| 114 | Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture ,material should bePC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 115 | Single Aperture |
| 116 | Supply , Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler withhermeticallysealed compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz AC supply,Full stainless steel (SS304)body (0.8 mm thick)and tank (0.5 mm thick) , stainless steel water tray,minimum two nosBrass Chrome plated faucets and suitable drainage system complete in all respect with requiredheight MS fabricated and Painted Angle iron frame( Cost of frame to be paid Extra )complete in all respect of the following capacity.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 117 | cooling capacity 60 Ltr./Hr. and storage capacity 120 Ltrs |
| 118 | Providing & Fixing of1200 mm sweepBLDC technologypower savingceilingfanwhich can withstand on votage fluctuationsfrom 140 volts to 240 volts ,power factor not less then 0.9 , service value (CMM/W) minimun 6.85 , air delivery minimun 220 CMM, speed minimum 330 RPM ( tolerance as per IS:374 2019 ) THD less then 10%and complete with down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steelpipe up to 80 cm, cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 119 | Without Remote |
| 120 | Providing & Fixing of IP20, 2\"x2\" LED Surface/ Recessedmounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection(Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. |
| 121 | OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 122 | Surface Moutning |
| 123 | Minimum lumen output 3600 lm |
| 124 | P & F 1.2mm thickM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 125 | SITC of 8 port Giga PoE Switch with dual uplink: unmanaged PoE switch; 8X10/100/1000 mbps Base-T PoE; 2*10/100/1000 Base-T (Uplink) or 2*1000 Base-X (uplink); PoE Power Consumption per Port: 30W; power budget: minimum 96 W; POE Protocols: IEEE802.3af, IEEE802.3at; Switching Capacity: 20 Gbps or better; MAC Table Size 2K or better; Working Temperature: -5°C-55°C; Power supply: DC48-57V Certificate of compliance: CE/FCC. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with P.W.D. Electrical B.S.R. 2022. |
| 126 | Part B |
| 127 | SITC of All-in-One PC (i5, 8GB, 512SSD) specification mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 128 | Form Factor :All-in-One PC |
| 129 | Processor : 12th Generation Intel® Core™ i5 processor |
| 130 | Memory card slot : 8 GB DDR4-3200 MHz RAM |
| 131 | SSD : 256 GB |
| 132 | HDD : 1 TB |
| 133 | Display : not less than 23.5\" diagonal, FHD (1920 x 1080) |
| 134 | Ports (Side) : 1x USB Type-A ; 1x USB Type-C; 1x headphone/microphone combo |
| 135 | Ports (Rear) : 1x USB Type-A ; 1x USB Type-C; 1x RJ-45; 1xheadphone/microphone combo |
| 136 | Video Connectors : 1 HDMI-out 1.4 |
| 137 | Audio Features : Dual 2 W speakers |
| 138 | Webcam : 1080p FHD IR privacy camera with integrated dual array digital microphones |
| 139 | Keyboard : Wireless Keyboard and mouse combo |
| 140 | Network Interface : Integrated 10/100/1000 GbE LAN |
| 141 | Wireless : 802.11a/b/g/n/ac (1x1) Wi-Fi® and Bluetooth® 4.2 |
| 142 | Operating System : Windows 11 Home |
| 143 | SITC ofDesktop Computer PC No 1 (i5, 8GB RAM, 512SSD) withspecification mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 144 | Form Factor : Tower Type, Small Form Factor |
| 145 | Processor : 12th Generation Intel® Core™ i5 processor |
| 146 | Memory : 8 GB DDR4-3200 MHz RAM |
| 147 | SSD : 512 GB |
| 148 | HDD : 1 TB |
| 149 | Display : not less than 23.5\" diagonal, FHD (1920 x 1080) |
| 150 | Ports : 1x USB Type-A ; 1x USB Type-C; 1x RJ-45; 1xheadphone/microphone combo |
| 151 | Video Connectors : 1 HDMI-out 1.4 |
| 152 | Keyboard : Wireless Keyboard and mouse combo |
| 153 | Network Interface : Integrated 10/100/1000 GbE LAN |
| 154 | Wireless : 802.11a/b/g/n/ac (1x1) Wi-Fi® and Bluetooth® 4.2 |
| 155 | Operating System : Windows 11 Home |
| 156 | SITC ofDesktop Computer PC No(i5, 16GB, 512SSD,With Equipment specification mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 157 | Form Factor : Tower Type, Small Form Factor |
| 158 | Processor : 12th Generation Intel® Core™ i5 processor |
| 159 | Memory : 16 GB DDR4-3200 MHz RAM |
| 160 | SSD : 512 GB |
| 161 | HDD : 1 TB |
| 162 | Display : Not less than 27\" diagonal, FHD (1920 x 1080) |
| 163 | Ports : 1x USB Type-A ; 1x USB Type-C; 1x RJ-45; 1xheadphone/microphone combo |
| 164 | Video Connectors : 1 HDMI-out 1.4 |
| 165 | Keyboard : Wireless Keyboard and mouse combo |
| 166 | Network Interface : Integrated 10/100/1000 GbE LAN |
| 167 | Wireless : 802.11a/b/g/n/ac (1x1) Wi-Fi® and Bluetooth® 4.2 |
| 168 | Graphic Card : 4Gb, 4 Port Graphic Card |
| 169 | Operating System : Windows 11 Home |
| 170 | SITC of Gooseneck Microphone with specification as mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 171 | Phantom power supply Voltage range : 12 to 48 V |
| 172 | Phantom power supply Current consumption : <8 mA |
| 173 | Performance |
| 174 | Sensitivity : 0.7 mV @ 85 dB SPL (2 mV/Pa) |
| 175 | Maximum input sound level : 110 dB SPL |
| 176 | Distortion : <0.6% (maximum input) |
| 177 | Equivalent input noise level : 28 dBA SPL (S/N 66 dBA ref. 1 Pa) |
| 178 | Frequency response : 100 Hz to 16 kHz |
| 179 | Output Impedance : < 200 ohm |
| 180 | Connector : 5‑pin DIN 180° (lockable) |
| 181 | SITC of 55\" Professional Seciers LED Monitorwith specification as mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 182 | Screen Size : 55 Inch or higher |
| 183 | Resolution : UHD (3840 x 2160) |
| 184 | Ports : Two or more HDMI in Ports |
| 185 | Speaker : 5 W + 5W or Higher |
| 186 | Mounting : Table Top Stand / Wall Mount |
| 187 | Accessory : Remote Control |
| 188 | Certifications : BIS,UL/CE |
| 189 | SITC of 40\" Professional sereis LED Monitor with specification as mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 190 | Screen Size : 40 Inch or higher |
| 191 | Resolution : FHD (1920 x 1080 ) |
| 192 | Ports : Two or more HDMI in Ports |
| 193 | Speaker : 5 W + 5W or Higher |
| 194 | Mounting : Table Top Stand / Wall Mount |
| 195 | Accessory : Remote Control |
| 196 | Certifications : BIS,UL/CE |
| 197 | SITC of 21\" LED Monitor with HDMI cable with specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 198 | Screen Size : 21\" Inch or higher |
| 199 | Resolution : FHD (1920 x 1080) |
| 200 | Ports : Two or more HDMI in Ports |
| 201 | Mounting : Wall/Table Mount |
| 202 | Certifications : BIS , UL/CE |
| 203 | SITC of Wall Mount Audio Speakers 12w for sound reinforcementas mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 204 | Rated Power : 12W |
| 205 | Sound Pressure Level at 12W/1 W (1 kHz, 1 m) : 101dB/90dB |
| 206 | Effective frequency range : 150Hz to 15kHz |
| 207 | Opening angle horizontal(1kHz/4kHz,-6dB) : 195°/95° |
| 208 | Opening angle vertical(1kHz/4kHz,-6dB) : 70°/20° |
| 209 | Rated Impedance : 833 Ohm |
| 210 | Rated input voltage : 100V |
| 211 | Connector : 4 Pole Push In Terminal |
| 212 | Operating temperature : -5 °C to +55 °C |
| 213 | Body Type : MDF construction |
| 214 | SITC of Wired Headphone for communication with specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 215 | Form Factor : Over the Ear Professional Headphones |
| 216 | Connectivity : Wired |
| 217 | Capsule diameter : 40 mm |
| 218 | Frequency response : 20 Hz - 20 kHz |
| 219 | Max. power handling : 100 mW |
| 220 | Impedance : 64 Ohm |
| 221 | Sensitivity : 110 dB @ 1 kHz |
| 222 | Cord length : 2.0 m |
| 223 | Connector : 1/8\" TRS connector plus 1/4\" TRS adapter |
| 224 | SITC of Camera for the video Coveragewith specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 225 | Imaging: |
| 226 | Sensor & Resolution : 1/2.8-inch CMOS; 1920 x 1080; 1080P60fp |
| 227 | Sensitivity : Color 0.0225 lux, Mono 0.0051 lux, With IR 0.0 lx |
| 228 | High Dynamic range : 146dB HDR |
| 229 | Lens type : Automatic Varifocal 3 to 9 mm |
| 230 | IR Range :Minimum 45m |
| 231 | Connectivity :ONVIF Profile S, G , M and T |
| 232 | Memory card slot : support 512 GB support |
| 233 | Data security : |
| 234 | Secure element : RSA 4096 bit; AES/CBC 256 bit |
| 235 | PKI : X.509 certificates |
| 236 | End-to-end encryption : Full end-to-end with supported VMS |
| 237 | Encryption : TLS 1.2; AES 256; AES 128; TLS 1.3 |
| 238 | Local storage encryption : XTS-AES |
| 239 | Video authentication : MD5; SHA-1; SHA-256; Checksum |
| 240 | Firmware protection : Signed firmware; Secure boot |
| 241 | Industrial Cyber Security Capability : IEC 62443-4-1:2018 |
| 242 | Hardware for data security : On-board unique Crypto-processor / TPM ) and Public Key Infrastructure (PKI) support |
| 243 | Audio Line In/Out : 1/1 with Built-in microphone |
| 244 | Certifications :BIS, CE/UL/FCC |
| 245 | SITC of Intercom facility instrumentwith specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 246 | Caller ID |
| 247 | Speaker Calling |
| 248 | Desk Key Phone |
| 249 | Caller Id Landline Set, 30 Incoming and 5 outgoing memory, 2 Level ringer volume switch, Mute option, Redial, ca |
| 250 | SITC of DTH device with subscription of 1 Year for the LED TV with kids Channel only . For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 251 | SITC of Server PC for the management of the Audio/Video processing & Secure Recording, Storage & Retrieval Facility with MS Server 2019 or higher OS specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 252 | Processor : Intel® Xeon® E-2314 or Higher |
| 253 | RAM : 16 GB (1x 16 GB) DDR4 |
| 254 | HDD : 2x4TB |
| 255 | SSD : 2X256 GB |
| 256 | Power supply type : 1x 180W External Power Adapter |
| 257 | Network controller : Embedded 1Gb 4-Port Controller |
| 258 | Storage controller : Embedded Intel VROC SATA SW RAID |
| 259 | OS : MS Server 2019 or Higher |
| 260 | SITC of Digital Audio Mixer (8 Channel) withDigital Signal Processor specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 261 | Digital Audio Mixer with 12 Inputs, Rugged Construction, Ultra-compact, Tablet/ PC/ Smartphone Controlled |
| 262 | 2 Independent Network Interfaces for simultaneous control by Wi-Fi and Ethernet |
| 263 | 4 XLR combo Mic/Line Inputs & 4 XLR Mic inputs; Fully recallable and remote-controlled mic gain and PhantomPower, |
| 264 | 2 Stereo RCA Line input with 2 Hi-Z/instrument channels |
| 265 | 2 Balanced Stereo XLR Aux Main Outputs with 2, 1/4”, with Level Control |
| 266 | 2 Channel USB Media Playback & Recording compatible with MP3, WAV and AIFF formats |
| 267 | 2 Channel USB Stereo Recording |
| 268 | 2 Headphone out |
| 269 | 4-band Parametric EQ, High-Pass Filter, Compressor, De-esser and Noise Gate on input channels |
| 270 | 31-band Graphic EQ, Noise Gate and Compressor on all outputs |
| 271 | Advanced feedback suppression allowing maximum gain before feedback on all aux outputs |
| 272 | Real Time Analyser on every channel with 120 frequency points and fast refresh |
| 273 | 3 dedicated FX effects processors: Reverb, Delay and Chorus with Subgroups, Mute Groups, View Groups, and more mixer controls |
| 274 | SITC of Audio Amplifier 120W for Sound Reinforcement specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 275 | Rated Output (RMS) : 120W |
| 276 | Frequency response : 60 Hzto 18kHz(+l /-3dBat -10 dB ref. rated output) |
| 277 | Distortion : < 1 % at rated output, 1 kHz |
| 278 | S/N (flat at max volume) : 65dB |
| 279 | Sensitivity : 1V |
| 280 | Impedence : > 20kohm |
| 281 | CMRR : 25 dB (50 Hz to 20 kHz) |
| 282 | Gain : 40 dB |
| 283 | Direct Output : 100 V, 70 V, 8/4 ohm |
| 284 | Acoustic noise level of fan : <48dB SPL at lm(max output) |
| 285 | Input Voltage : 230VAC ± 10% at 50/60Hz or 24VDC |
| 286 | Input Current : 8A at 230 VAC, 6A at 24 VDC |
| 287 | SITC of Audio Distribution Amplifier for Headphones specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 288 | Input Type : ¼\" TRS connector, balanced |
| 289 | Impedance : approx. 20 kΩ, balanced / approx. 10 kΩ, unbalanced |
| 290 | CMRR : 40 dB typ. @ 1 kHz |
| 291 | Phones Out : |
| 292 | Impedance : min. 100 Ω |
| 293 | Max. output level : +13 dBu @ 100 Ω load |
| 294 | Link Out A : |
| 295 | Type : ¼\" TRS connector, balanced |
| 296 | System Specifications |
| 297 | Frequency response : 10 Hz to 120 kHz, -3 dB |
| 298 | Dynamic range : 108 dB, 10 Hz to 22 kHz (100 Ω load) |
| 299 | Distortion : 0.007% typ. (100 Ω load) |
| 300 | Crosstalk : >80 dB @ 1 kHz |
| 301 | Signal-to-noise ratio : 10 Hz to 22 kHz >95 dB @ 0 dBu, a-weighted |
| 302 | Amplifier |
| 303 | Max. output level : +21 dBm / 124 mW (100 Ω load) |
| 304 | Min. output impedance : 47 Ω |
| 305 | SITC of Wall/Table Mount Face Plate to Connect Headphones. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 306 | SITC of Volume Controller as per system requirement.For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 307 | SITC of Audio Distribution 8x2 Splitter for Audio Recording specification as mention below. For additional technical parameters of products/ work, refer Annexure \"A\" attached withBSR 2022. |
| 308 | Audio Input A / B; impedence; Max. input level :XLR; 10 kΩ balanced, 6.6 kΩ unbalanced; \"+21 dBu |
| 309 | CMRR :64 dB typ. @ 1 kHz |
| 310 | Output 1 – 8; Max. output level: XLR, balanced; \"+28 dBu |
| 311 | Frequency response :10 Hz to 75 kHz (±3 dB) |
| 312 | Dynamic range :117 dB |
| 313 | Distortion (THD) :0.001% typ. @ +4 dBu, 1 kHz, Gain 1 |
| 314 | Crosstalk :< -77 dB @ 1 kHz |
| 315 | Signal-to-noise ratio :20 Hz to 20 kHz, > 97 dB @ 0 dBu |
| 316 | Output level; Mode :5-digit LED display: sig / -24 / -12 / 0 / clip; Status LED Indicator |
| 317 | SITC of Intercom Appliance (PBX) specification as mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 318 | Type : Analog Inteercom System |
| 319 | SLT Port :12 Lines Analog Extensions |
| 320 | CO Port :3 External Trunk Line |
| 321 | Optinal : VoIP Server, GSM, Voicemail, 50 SIP Users, 8 SIP Trunks |
| 322 | Built-in Ports : AIP, AOP, DIP, 2 R232C & Ethernet |
| 323 | Features : Auto Attendant, LCR, Multi-party Conference, LDAP Client |
| 324 | Power Supply : Universal SMPS (100-240V, AC, 47-63 Hz |
| 325 | Providing and Installation ofLife Time Licenses for encrypted & Secure video recording of the proceedings and the VC with Remote Witnessfor upto 5 cameras specification as mention below |
| 326 | Secure Video Recording with End-to-End Data Encriptio : PKI: X.509 certificates with TLS 1.2; AES 256; AES 128; TLS 1.3 |
| 327 | Video authentication to prevenet tempring of the Recordi : MD5; SHA-1; SHA-256; Checksum |
| 328 | Licencce Software from the samee OEM of cameras for better interoperability |
| 329 | Pack of 8 camera channel License & 2 Client Licensee |
| 330 | Licenses for 5 Year period for Video Conferencing |
| 331 | SITC of Online UPS specification as mention below. For Additional technical parameters of product/work, refer Annexure \"A\" attached with BSR 2022. |
| 332 | PHASE : Single phase with ground |
| 333 | CAPACITY : 3000 VA / 2400 W |
| 334 | INPUT |
| 335 | Nominal Voltage : 200/208/220/230/240VAC |
| 336 | Input Voltage Range : 140VAC or 160-280VAC (Based on load at 100%) |
| 337 | Frequency Range : 40Hz~ 70 Hz |
| 338 | Power Factor : 0.8 Power Factor |
| 339 | OUTPUT |
| 340 | Output Voltage : 200/208/220/230/240VAC |
| 341 | Voltage Regulation : ± 1% |
| 342 | Frequency Range (Synchronized Range) : 47~ 53 Hz or 57 ~ 63 Hz |
| 343 | Frequency Range (Batt. Mode) :50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz |
| 344 | Current Crest Ratio : 3:01 |
| 345 | Harmonic Distortion :≦ 3 % THD (Linear Load) |
| 346 | ≦6 % THD (Non-linear Load) |
| 347 | AC Mode to Battery Mode Transfer time : Zero |
| 348 | Inverter to Bypass Transfer time : 4 ms (Typical) |
| 349 | Waveform (Batt. Mode) : Pure Sinewave |
| 350 | Battery Backup : Minimum 15 Minutes |
| 351 | Charging Current (max.) :6A |
| 352 | LCD INDICATORS : Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
