|
| 1 | Providing , Fixing ofAlmirah with mica laminated 18 mm HDHMRboard out side with one side decorative lamination .depth of cupordis 30 cm back side of cup board made by 5.5 mm thick HDHMRboard including cost of all acessires as handle hinges lock rolling chainel etc complete work |
| 2 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mmapart including drilling 12 mm diameter holes andplugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1concentration DSR 2.53.3 |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below(D.S.R No-15.12.1) |
| 4 | Supply and fixing ISI marked 32 mm thick flush door shutter commercial conforming quality conforming to IS : 2202 (Part I) including supply and fixing of hinges,screws, sliding bolt, tower bolt, door stoper and Allum. Handel etc complete work. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.S.R No-15.23.1 |
| 6 | Providing and fixing ofkitchen shelves/cabinet with basket, shutter is made by mica laminated 18mm HDHMR board and back side of box is made by 12mmHDHMR board. Length and width of cabinet is 50cm and depth/height of cabinet is 65cm including cost of all accessories such as handle, hinges, lock, rolling channel, basket, catcher etc complete work. |
| 7 | Providing and Fixing of cup board with mica laminated 18mm HDMRboard out side with one side decorative lamination .depth of cupordis 30 cm back side of cup board made by 12mm thick HDMRboard including cost of all accessories such as handle, hinges, lock etc complete work. |
| 8 | Providing and laying vitnifed floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours shades, laid on on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc. complete.Size of Tile 600x600 mm (D.S.R-11.41.2) |
| 9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.S.R No- 11.38) |
| 10 | Providing and fixing CI jali complete |
| 11 | Providing and Fixing of PVC wall Pannel approved make , including supply of all material labour T&P etc. required for proper completion of the work . |
| 12 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). D.S.R No-13.5.1 |
| 13 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18 |
