Complete renovation of the remaining bathroom in house no. 88-89B situated in Vidhansabha residence-2 (old) and demolition of Shatigrast plaster and renovation work due to seepage in house no. 56-57B situated below the above house - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR No-15.56) 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm (DSR No-15.23.1) 3 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (DSR No-13.4.1) 4 Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes (DSR No- 18.8.2) 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm nominal size).PWD (SCH) 273. 6 Providing and fixing of CPVC gate valve of 20mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 7 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge 110 mm dia. 8 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge 63 mm dia. 9 Providing and fixing of PVC make T of 100x100x100mm dia of approved brand and quality. 10 Providing and fixing of PVC make Nahani trap of self cleansing design, approved brand and quality 100mm dia. 11 Providing and fixing of PVC make P trap of self cleansing design, approved brand and quality 100mm dia. 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR No- 4.1.3) 13 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (DSR No- 11.40) 14 Providing and fixing Ist quality ceramic glazed wall tiles (bell/ kajaria/ johnson/ somany) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm 15 Providing and fixing white vitreous china Single Piece water closet Perryware make Camel (C8856 (S-220) size of 645x340x680mm, with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan with ISI marked white solid plastic seat and lid ). 16 Providing and fixing white vitreous china water closet (Indian type W.C. pan) with 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan ISI marked ). 17 Providing and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including Providing of all material, labour T&P etc. complete. 18 Providing and fixing of glass shelf 22L&K make with C.P. Guard standard size and bracket including Providing of all material labour T&P required for proper completion of the work. 19 Providing and fixing of glass corner, acrylic make including providing of all material labour T&P required for proper completion of the work. 20 Providing and fixing C.P. Soap Dish l&k make including Providing of all material , labour T&P etc. complete. 21 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 22 Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal Sepia, Size, 565x450mm, Cat No- C8872 with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work. 23 Supply and Fixing C.P. brass bib cock 15mm. dia. Long body L&K 0047 including supply of all materials, labour, T&P etc. required for proper completion of the work. 24 Supply and Fixing C.P. brass bib cock 15mm. dia. Short body L&K 0057 including supply of all materials, labour, T&P etc. required for proper completion of the work. 25 Providing and fixing C.P. brass angle valve l&Kfor basin mixer and geyser points of approved quality 15 mm nominal bore. 26 Providing and fixing C.P. OVER HEADshower with arm heavy qualityL&K 0668 with 15mm inlet: 150 mm diameter 27 Providing and fixing C.P. Brass Two way bibcock heavy code No-0257 L&K or Equivalent make including supply of all material, labour T&P etc. complete. 28 Providing and fixing C.P. Brass Two way angle valve 15 mm dia( L &K 0327 make) with wall flange including supply of all material, labour T&P etc. complete. 29 Providing and fixing C.P. brass wall mixture with tele phonic shower 3 in 1 (L&K make code 0457 ) or Equivalentquality. 30 Providing and fixing CP towel Rod OF L&K or equivelent Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete. 31 Providing and fixing CP towelring L & K or equivelent fittings arrangement of approved quality. 32 Providing and fixing CP brass extention pieces of 15mm nominal dia for proper complition of the work. 33 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) 34 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. D.S.R No- 9.21.1 35 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats). D.S.R No-13.81.1 36 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. D.S.R No-15.60
