Tender For Instrumentation Works For Gds Unit At Nrep; 1 Supply of following items Supply charges including charges for transportation, unloading at site, MTC, fasteners, accessories, material inspection at Vendor work shop including TPI charges , , MOCas per Modulating & ON/OFF Control and Isolation Valves-TP-1ZZZA-IC-SPE-0011 & TP-1ZZZA-IC-SPE-0012; For Hooter, Beacon & FireDetectors refer Specification-TP-1ZZZA-IC-SPE-0024_D1. 2 SOLENOID VALVES 3 AIR FILTER REGULATORS 4 BEACON & HOOTER 5 TERMINAL BLOCKS 6 DIN RAIL 7 Hand SWITCH STOP, RESET 8 Light Interface Unit with Patch Chord - 6 port 9 8-Port ethernet switch 10 RS-485 to MODBUS TCPIP converter- Industrial Grade of reputed make 11 Ethernet to FO converter - industrial grade of reputed make 12 Corrosion probe with Hand held indicator and retractable probe and mandatory spare. (Refer MR documentTK-1ZZZA-IC-SPE-0035 for details) 13 JUNCTION BOXES - SUPPLY 14 Supplycharges including handling, TPI charges, transportationto the installation location, required hardware’s/fasteners, plugging of spare entries, Tagging, box-up, suitable greasing forscrews/L key screws, tools & tackles, manpower,scaffoldingetc. (MOC of hardwares shall as per TKIS -India specificationand direction of Engineer-in-Charge.Refer Specification no- TK-1P27A-IC-WID-0001_D1 15 WEATHERPROOF JUNCTION BOXES 16 30 Terminals 17 EX-ROOF/FLAME PROOF JUNCTION BOXES 18 20Terminals 19 12 Terminals 20 06 Terminals 21 40 Terminals 22 EX-PROOF/FLAME PROOF/WEATHER PROOF HAND SWITCHES/PUSH BOTTON - SUPPLY 23 PUSH BUTTON STATION / CONTROL / LOCAL PANELS 24 EMERGENCY STOP 25 VIBRATION RESET/ON-OFF VALVES RESET PB STATION 26 BEACON TEST AND RESET PB STATION 27 INSTRUMENT AIR MANIFOLDS- SUPPLY 28 Supply charges including handling, transportationto the installation location, hardware/fasteners, accessories installation, pneumatic testing, cleaning/flushing, require consumables, tools & tackles, manpower, etc. all complete as per specification all complete as per specification TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation. and direction of Engineer-in-Charge. 29 10 WAY 30 TUBE AND TUBE FITTING- SUPPLY 31 Supply charges including handling, TPI charges, transportation to the workinglocation, fabrication, accessories installation (fittings, valves manifold, etc.), tools & tackles, manpower, scaffolding , Hydro/Pneumatic testing, dressing, clamping, tagging, etc. all completeas per specification TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation 32 SS316 TUBE SIZE 33 12mm OD x 1.65mm WT, Seamless, SS316 34 FITTINGS- SS316 35 MALE CONNECTORS- SS316 (1/2 NPTM x 1/2 OD) 36 FEMALE CONNECTOR- SS316 (1/2 NPTF x 1/2 OD) 37 UNION TEE (1/2 OD x 1/2 OD x 1/2 OD) 38 TUBE UNION (1/2 OD x 1/2 OD) 39 TUBE CAP (1/2 OD) 40 NEEDLE VALVE 41 END BLIND CAP (NPT MALE) 42 ADAPTOR/REDUCER 43 GATE VALVE (1/2 NPTF x 1/2 NPTF) 44 VARIOUS FITTINGS 45 CONDENSATE POT 46 MALE CONNECTORS- SS316 (1/4 NPTM x 12mm OD) 47 FEMALE CONNECTOR- SS316 (1/4 NPTF x 12mm OD) 48 END BLIND CAP ( 12mm OD) FOR TUBE 49 2 VALVE MANIFOLD SS316 (1/2NPTFx1/2NPTF) 50 2 VALVE MANIFOLD SS316 (1/2NPTFx1/2NPTM) 51 CABLE GLANDING AND TERMINATION 52 Supply charges includingTPI charges, transportation to working location ,require hardware/fasteners, consumables, installation of hoods & adapters, tagging ,ferruling, lugging, supply of consumables( like lugs, sleeve for shield/drain, sealing compounds etc.) , making suitable holes for cable entries, tools & tackles, manpower, scaffolding etc. all complete as per specification and direction of Engineer-in-Charge. Glanding & termination is included in cable laying cost. Following is applicable if contractor to perform only glanding & termination and cables are layed by others. 53 SIGNAL,CONTROL,POWER CABLES 54 1/2 NPTDOUBLE COMPRESSIONSS304 with shrouds 55 1/4 NPTDOUBLE COMPRESSION SS304 with shrouds 56 1-1/2 NPTDOUBLE COMPRESSION SS304 with shrouds 57 1-1/4 NPTDOUBLE COMPRESSION SS304 with shrouds 58 1 NPT DOUBLE COMPRESSION SS304 with shrouds 59 1/2 NPTBLINF PLUG 60 1-1/2 NPTBLIND PLUG 61 CABLE GLANDS 1-1/2 ET, Weatherproof with Checknut (PANEL) 62 CABLE GLANDS 1 ET, Weatherproof with Checknut (PANEL) 63 CABLE GLANDS 1-1/4 ET, Weatherproof with Checknut (PANEL) 64 VARIOUS ADAPTORS OF DIFFERENT SIZES 65 1 1/2NPT X 2NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND 66 1 1/2NPT X 1NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND 67 1/2 NPT X 3/4NPT ADAPTER DOUBLE COMPRESSION CABLE GLAND 68 3/4 NPTDOUBLE COMPRESSION 69 M20DOUBLE COMPRESSIONSS304 with shrouds 70 M40DOUBLE COMPRESSION SS304 with shrouds 71 CABLE TRAYS/DUCTSSUPPLY 72 Supply charges including transportation to working location, TPIcharges ,Fabrication, Clamping, accessories installation (including bends, elbows, reducers etc.), Tray identification, painting wherever require, consumables, tools & tackles, manpower, scaffolding etc. all completeas per TKIS-INDIA specificationand direction of Engineer-in-Charge. TP-1ZZZA-IC-SPE-0033_D1 Specification for Instrument Installation 73 PERFORATED TRAY WITH COVERS ANODISED ALUMINIUM (Upto 300mm Bends shall be site fabricated) 74 WIDTH 300 MM 75 WIDTH 150 MM 76 WIDTH 100 MM 77 WIDTH 50 MM 78 CANOPY /SUNSHADEFRP - SUPPLY 79 Supplycharges including TPI charges ,transportationto working location, supporting wherever requireforinstruments, JBs , etc. (like integratedinline instruments, close couple mounted instruments, etc.), hardwares/fasteners, consumables etc. Fabrication, installation, tools & tackles, manpower, scaffolding etc. all complete as per TKIS-INDIA specification and direction of Engineer-in-Charge.TP-1ZZZA-IC-BOD-0001_D3 Engineering Design Basis for Instrumentation 80 PREFABRICATED. CANOPIES 81 SINGLE TRANSMITTER INCLUDING TEMP ELEMENT & GAS/ FIRE DETECTOR 82 TWOTRANSMITTERS/INSTRUMENTS 83 SINGLE JUNCTION BOXES 84 THREE JUNCTION BOXES 85 FOUR JUNCTION BOXES 86 HAND SWITCH/PUSH BUTTON 87 LCP 88 Multiple transmitters/instruments 89 Two Junction boxes 90 Six Junction boxes 91 Eight Junction boxes 92 STANCHIONS FOR INSTRUMENTS - SUPPLY 93 Supply charges including TPI charges, transportation to workinglocation,brication, surface cleaning, painting, suitable clamps with pipe line (for close couple hook-ups etc.), hardwares/fasteners, grouting, clamps, consumables, tools & tackles, manpower, scaffolding etc. all complete as per TKIS-INDIA specification-REFER AS PER DOCUMENT INSTRUMENT INSTALLATION SKETCHES and direction of Engineer-in-Charge.REFER AS PER DOCUMENT TP-1ZZZA-IC-STD-0001 INSTRUMENT INSTALLATION SKETCHES 94 FLOOR MOUNTING 95 STEEL COLUMN MOUNTING 96 RCC WALL, COLUMN 97 PLATFORM MOUNTING 98 OUTSIDE HAINDRAIL 99 MULTIPLE TX ON PLATFORM MOUNTING 100 STRUCTURAL STEEL 101 Supply charges including TPI charges,transportation , fabrication, installation, surface cleaning, painting , consumables, tools & tackles, manpower, etc. all complete as per TKIS-INDIA specification.and direction of Engineer-in-Charge. 102 STRUCTURAL STEEL 103 NUT & BOLTS WITH WASHERS, M10x35mm, SS 104 ANCHOR FASTNER, M10x80mm, MS (CADMIUM) 105 BEAM CLAMP WITH SS BOLT & NUT , HEIGHT 40mm, MS/SS 106 PIPE CLASSB,IS=1239 PART-1 , 2, MS(PAINTED) 107 COVER PLATE FOR2PIPE , 6THK., MS(PAINTED) 108 TYPE J HOOK BOLT & NUT , M10x100mm, MS 109 NUT & BOLTS WITH WASHERS, M12x50mm, SS 110 ANCHOR FASTNER, M10x100mm, MS HD.GALVANISED 111 ANCHOR FASTNER, M12x100mm, MS (CADMIUM)
