}

Tender For Installation Of Lt Panel In Aor Of Bop Regal Of 125 Bn Bsf, Samba-Jammu And Kashmir

Border Security Force has published Tender For Installation Of Lt Panel In Aor Of Bop Regal Of 125 Bn Bsf. Submission Date for this Tender is 26-12-2024. Electrical Panel Tenders in Samba Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

46721899
Tender For Installation Of Lt Panel In Aor Of Bop Regal Of 125 Bn Bsf
Open Tender
Indian
Jammu And Kashmir
Samba
26-12-2024

Tender Details

Tender For Installation Of Lt Panel In Aor Of Bop Regal Of 125 Bn Bsf; 1 Following 2 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Above 95 sq. mm and upto 185 sq. mm 3 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 95 sq. mm and upto 185 sq. mm 4 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. 95 sq. mm and upto 185 sq. mm 5 Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following sizedirect in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. 95 sq. mm and upto 185 sq. mm 6 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required 7 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required 8 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 9 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 150 sq. mm 10 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 185 sq. mm 11 Supplying and fixing of light class GI Pipe of 80 mm dia of 3 mtr lenth for protection of cable (for Road) 12 Supplying, fixing & commissioning of out-door mounted type cable joint box both side openable for upto size of cable 3½ X 185 sq. mm XLPE cable, primer coated paint & provided with required gasket for dust/vermin proof with suitable for 415 volt, 3-phase, 50 HZ, 4 wire system, fabricated out of CRCA sheet up to 2 mm thick duly compartmentalized for bus bar section, complete with hinged doors having locking arrangement and providing detachable gland plate at the bottom of the box, complete with 300 amps 4 nos insulated aluminium bus bar and supplied with suitable pedestal of 35 mm x 35 mm x 4 mm angle iron with 1000 mm long leg. including foundation work i.e. sand, cement. (Minimum size of cable joint box should be 500 mm x 600 mm x 300 mm (L x H x D), Make CPRI APPROVED PANEL BUILDER) 13 Supplying, fixing & commissioning of indoortype CPRI approved LT PANEL both side openable, primer coated paint & provided with required gasket for dust/vermin proof suitable for 415 volt, 3-phase, 50 HZ, 4 wire system, fabricated out of CRCA sheet of 2 mm thick duly compartmentalized for bus bar section & switch gears, complete with hinged doors having locking arrangement and providing detachable gland plate at the bottom of the box, complete with 500 amps 4 nos insulated aluminium bus bar and supplied with suitable pedestal of 50 mm x 50 mm x 6 mm angle iron with 300 mm long leg & grouting the same in suitable cement concrete foundation, arrangement for incoming/outgoing cabling/cable termination with suitable size lugs,locking, interconnection,connection of existing cables etc. as required. (Minimum size of LT PANEL should be 1829 mm x 1524 mm x 607 mm (H x W x D), CPRI APPROVED PANEL BUILDER)i) Front operated Change over switch 250A -01 (C/S,/HAVELLS/HPL / L&T / Schneider)II) 250 Amp, 4 Pole MCCB,415 V, 35 KA,Make- Havells/Standard/ Indoaisan/ABB/L&T.- 02 NosiiI) 160 Amp 4 pole MCCB,415 V, 25 KA,Make- Havells/Standard/ Indoaisan/ABB/L&T.- 04 NosiV) Digital Type Voltmeter Range - with Selector switch (AE /MECO/ L&T)-01 No v) Digital Type Ammeter Range - with Selector switch (AE /MECO / L&T)-01 No vI) Indicator Lamp-03 NosvIi) CTs - 03 Nos viiI) One lamp holder, switch with 09/10 watt LED bulb complete with wiring- 01 setIX) Danger plate- 01 No

Key Value

Document Fees
Refer document
EMD
INR 24007.0 /-
Tender Value
INR 12 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail