Supply Of Chain Saw, Petrol Brush Cutter And Petrol Pole Pruner At Store Of Subhash Mohalla Ward No.233, Shahdara North Zone., Delhi-Delhi

Supply of Chain Saw, Petrol Brush Cutter and Petrol Pole Pruner at Store of Subhash Mohalla Ward No.233, Shahdara North Zone. , Petrol Operated Chain Saw : Engine :Single Cylinder, 2 Stroke, Aircooled Only Displacement: 45.4Cc Power Output:2.3Kw. 3.0 Hp Max.Engine Speed (With Guide Bar & Chain ): At Least 12500 Rpm Carburetor: Diaphragm Type & Compensator Technology. Fuel Tank Capacity: Should Be Minimum 450 Ml. Dry Weight( Without Cutting Attachment ): Should Not Be More Than 5.0 Kg Clutch: Clutch Shoe Linining Metal Only. Guide Bar Design: Should Be Rollomatic Type. Guide Bar Length: Guide Bar Length Must Have 50 Cm/20 Inch. Guide Bar And Chain: Should Have Same Manufacture Only. Chain Type: Every Drive Link Require Groove & Small Oil Receiver Hole For Beter Lubrication. 0.325 Inch Pitch & 1.6 Mm Thickness Only. Chain Lubrication System: Fully Automatic ,Speed Controlled Rotary Oil Pump Chain Oil Tank Capacity: Should Be Minimum 200 Ml. Oii Pum Drive: Should Have Direct Drive From Crankshaft & Oil Pump Flow Adjustable. Master Lever Control: Must Have All Operation In One Hand, Chock,Throttle, Acceleration,Switch Off. |Guaranteed Sound Power Level: Should Not Be More Than115 Db(A) Maximum Chain Velocity To Iso 11681: Should Be Minimum 28 Mis , Petrol Operated Brush Cutter: Engine: Single Cylinder, 2 Stroke, Aircooled Only Engine Displacement: 40.2Cc Power Output: 2Kw/2.7Hp Max Output Shaft Speed At Cutting Attachment: Should Be Minimum 9000 Rpm Carburetor: Diaphragm With Compernsator Technology. Fuel Tank Capacity: Minimum 600 Ml. Weight( Dry,Without Cutting Attachment & Deflector): Should Not Be More Than 7.5 Kg Clutch: Centrifugal Type, Clutch Shoe Support Base & Lining Metal Only. Multi Function Handle: Should Have Acceleration ,On/Off Switch At Right Lhandle. Brushcutter Harness: Should Be Double Shoulder Harness Only. Anti Vibration System: Must Have 4- Point Aniti Vibration System. Vibration Level In M/S2 At Right Handle : Should Not Be More Than 2.5 M/S2 |Sound Pressure Level Db(A): Should Not Be More Than 105 Db(A) Drive Shaft Design: Must Have Drive Shaft Ends Square Design Type Only. Certification : Must Have Valid En Certificaton , Supply Of Telescopic Pole Pruner: Specificaion: :Pole Length Incuding Blade: 6.5M Blade Material: Hardened & Tempered High Carbon Steel.The Head Of The Blade Shall Have A Hooked Tip Useful For Cutting Twigs Saw Blade Shape: Hooked Type Curved Saw Blade Type & No Of Cutting Teeth :Tripple Grounded 86 Teeth Blade Length : 15-16 Pole Type: Light Weight Telescopic Tubular Aluminium Alloy Extendable Pole No Of Positions For Pole Height Adjustment: 10 Positions Locking Mechanism : Ergonomicvaly Designed Two Way Locking Mechanism Total Working Length: Max 219(6623 Mm), Mln 103 (3103Mm) Branch Cutting Capacity: 200Mm Max

INR 590 /-

INR 2200.0 /-

INR 1.09 Lakhs /-