|
| 1 | SCHEDULE \"A\" PART-II [B/R Works]: M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate \"Z\" sections and other sections ofapproved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsideswithrequired EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge. |
| 2 | S & F Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as directed. |
| 3 | S & F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/Rmduly powder coated of any colour (Thickness or powder coating not less than 50 micron)including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed |
| 4 | S & F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as directed |
| 5 | S & F MSR 116 Venetian blinds / curtains of shade as directed suitable for windows of size 5\"x5\" including all necessary fittings and fixing arrangement complete all as ditected by the Engineer-in-Charge |
| 6 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as directed |
| 7 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed |
| 8 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in Fins, fascias, louvres, parapets,and railings exc. 60cm in height, newels, balustrade, and the like complete all as directed |
| 9 | M & L for TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 10 | Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed. |
| 11 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar includingallquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed |
| 12 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 using old size bricks complete all as specified and directed. |
| 13 | M & L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. |
| 14 | M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over 1mm thick Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty on newly plastered walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections including rubbing with sand paper to obtain a smooth surfacecomplete all as specified and as directed.Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Exterior emulsion painting through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 15 | S & F Vitreous China urinals, half stall type complete including providingand fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern but inclduingwaste pipe) |
| 16 | S & F in repairs 15mm dia fancy type, chromium plated angle/Stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. |
| 17 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and removing rubbish off the premises complete all as directed |
| 19 | M & L for coloured Glazed ceramic tiles of size 450x300x7mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 20 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 21 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed |
| 22 | Supplying and fixing of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls / ceiling or laying in floors including taking down old steel water tubing 15mm dia complete all as specified and directed. |
| 23 | Supplying and fixing of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls / ceiling or laying in floors including taking down old steel water tubing 15mm dia complete all as specified and directed. |
| 24 | S & F 15mm dia fancy type, chromium plated angle/Stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. |
| 25 | S & F in repairs bevelled edge looking mirror of selected quality glass, of size 600 x 900 x 5.5mm thick mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium beading alroundcomplete all as specified and directed. |
| 26 | S & F Continental glass shelf 600mm long with chromium plated bracket guard and railing complete all as directed. [Make shall be Jaquar of model No. CAN-1171N or its equivalent] |
| 27 | S & F Stainless steel towel ringfixed with and including chromium plated brass screws complete all as directed. [Make shall be Jaquar of model No. CAN-1121BN or its equivalent] |
| 28 | S & F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St-240 complete all as specified |
| 29 | S & F Mild steel Plates (plain or chequered) channels,squarecutor notched (ordinaryand counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified |
| 30 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 10cm and n exc 15cm long and dia of neck 11 to 15cm complete all as directed |
| 31 | M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified. |
| 32 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / \"Z\" profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 33 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 34 | S & F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 35 | Complete removal of existing roof treatment including concrete bedding and felt by picking, sweeping, cleaning, washing down with water to remove dust, etc including Material & Labour for brushing cleaned roof surfaces with neat cement slurry @3kg/ Sqm and applying 10mm thick cement screed in cement mortar 1:3 mixed with and including water proofing compound @ 3% by weight of cement over and including 25mm thick PCC 1:2:4, type B-0, applying polymeric water proofing membrane of weight not less than 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm) including coating the surface with water based bituminous primer @ 0.5 lit / Sqm and hot blown bitumen @ 1.20 Kg/Sqm at the bottom and another coat at top of the membrane and finally finished with one coat of bitumineous aluminium primer at 100 grams/Sqm including sealing all joints by thermo fusion with minimum 10cm overlap including removing debris outside MD land complete all as specified and directed by the Engineer-in-Charge. |
| 36 | M & L for roof cooling ceramic tiles of size 300x300mm, 7 to 8mm thick conforming to IS-15622, laid down roof and joint shall be kept as 3mm filled with expoxy grout. To attain the best result 3mm thick tile spacers to be used, masking tape shall be put before putting the epoxy grout and the joint shall be thoroughly cleaned immediately laid over and including screed bed 15mm thick in CM 1:4 complete all as directed |
| 37 | Taking down cement plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified |
| 38 | M & L for applying 2 coats of two component solvent free, moisture insensitive epoxy resin coating, should achieve compressivce strength of > 70 Mpa after 14 days having pot life, minutes at 270C, 100 gr>40 mass. The product shall have a minimum pot life of 120 Min at 350C and an open time of atleast 4-6 hours @ 300C. It shall develop a minimum compressive strength of 40 MPa and a bond strength of 11 MPa of TM bond EP. Before applying coating surface should be cleaned from dirt, fungus and all foreign matters complete all as specified and directed by the Engineer-in-Charge. [Make: Thermax Ltd / Tiki tar/ Torchtar] |
| 39 | M & L for applying 20mm thick shear thinning fibre reinforced polymer modified, impermeable to aggressive elements, dual shrinkage compensated, cementitious repair mortar with alkali resistant synthetic fibres for exceptional resistance cracking complies ASTM-C-109 with flexural strength ASTM-C-348 @ 7 days meeting 7 N/Sqmm, tensile strength @ 7 days (ASTM-C-307) > 3 N/Sqmm, compressive strength of 35MPa at 7 days and 45MPa at 28 days at the outer or inner RCC, Versatile having specific gravity of 1.02 cement sand can be used for finishing purpose of BSSF complete all as specified and directed by the Engineer-in-Charge. [Make: Thermax Ltd / Tiki tar/ Torchtar] |
| 40 | M & L for preparation of new surfaces of walls/ceilings/chajjas/parapets including cornices, pilasters, etc including brooming or brushing, scrapping down smoke spots, moulds and all foreign matter including filling with crack filler and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm with fuly automatic airless spray machine using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spary gun with a max material hose length of 30m the spary machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer complete all as directed. [Note:The contractor shall carryoutPainting through the Authorised Applicator of the manufacturer only] |
| 41 | M & L for providing and filling three components compound (A) graded filler (B) E-Resins (C) thixotropic agents with adjustable consistancy by varying the filler component having the density of 1.64 - 1.68 gm/cc of max treat EPG, after opening up in \"V\" groove manner covering the area of 300mm from central line of crack with the depthof 10mm complete all as specified. [Make: Thermax Ltd / Tiki tar/ Torchtar] |
| 42 | M & l for treating the existing pipe penetrations using non-shrink, free flowing, cementitious grout. The compressive strength of the grout must exceed 50 N/Sqmm at 7 days and 60 N/Sqmm at 28 days. The flexural strength of grout must exceed 9 N/sqmm at 28 days. Fresh wet density of the mixed grout must exceed 2150 Kg/cum of Maxgrout PF. Further flashing the area using solvent based UV resistant polyurethene based waterproofing material having minimum tensile strength on 4 N/sqmm and minimum elongation of 800% complete all as specified and directed. [Make: Thermax Ltd / Tiki tar/ Torchtar] |
| 43 | S & F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling or laid in floors including taking down old pipes complete all as specified and directed. |
| 44 | M & L for 110mm bore PVC (SWR) bends any radius complete all as specified. |
| 45 | M & L for 110mm bore PVC (SWR) branch piece, single (single \"Y\") equal or unequalcomplete all as specified. |
| 46 | M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified. |
| 47 | M & L for 110mm bore PVC (SWR) vent cowl complete all as specified. |
| 48 | S & F in repairs Stack clamps made of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore of pipe complete all as directed |
| 49 | S & F in repairs Table top wash hand basin white with all necessary fittings complete all as directed. [Make: Jaquar of model No. JDS-WHT-25943 or its equivalent] |
| 50 | S & F in repairs Sensor type pillar tap with all necessary fittings complete all as directed. [Make: Jaquar of model No. SNR-CHR-35019PM or its equivalent] |
| 51 | S & F in repairs 32mm bore bottle trap of stainless steel having minimum water seal (minimum weight 32mm-260 gm) with all necessary fittings complete all as directed. |
| 52 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as directed |
| 53 | M & L for 25mm thick PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in sub base of floors and pavings complete all as specified and directed |
| 54 | M & L for double charged Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as directed |
| 55 | M & L for double charged Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in vertical surfaces such as dado / skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as directed |
| 56 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in CM 1:6 using old size bricks complete all as specified and directed. |
| 57 | M & L for rendering 15mm thick in two lyers 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and top layer 5mm thick in CM 1:4 mixed with and including cement water proofing compound as per manufacturers instructions finished even and smooth with out using extra cement complete all as specified and directed. |
| 58 | M & L for rendering 15mm thick in two lyers 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and top layer 5mm thick in CM 1:4 mixed with and including cement water proofing compound as per manufacturers instructions finished even and smooth with out using extra cement complete all as specified and directed. |
| 59 | Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed. |
| 60 | Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / disintegrated rockl complete all as specified and directed. |
| 61 | M & L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified. |
| 62 | M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, builtin CM 1:6 complete all as directed |
| 63 | S& F rolled mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E- 250) quality \"A\" complete all as directed |
| 64 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span complete all as directed |
| 65 | M & L for mild steel TMT Bars of 5mm dia upto and including 10mm dia as in stirrups, spacers, binders including hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 66 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in foundations, footings, plinth beams, bases for columns, etccomplete all as directed |
| 67 | M & L for 100 mm thick PCC 1:4:8, Type D-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed. |
| 68 | M&L for sand filling in foundations, floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 69 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed |
| 70 | M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding15 cm thick watered and rolled and consolidated complete all as specified. |
| 71 | M&L for Moorum/red bajri filling in foundations, floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 72 | M & L for 25mm thick PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in sub base of floors and pavings complete all as specified and directed |
| 73 | S & F mild steel framed work such as grills, grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conformingto FE 290, Gde E-165 complete all as specified and as directed |
| 74 | S & F mild steel framed work with ornamental and intricate design as in grills, gates, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conformingto FE 290, Gde E-165 complete all as specified and as directed |
| 75 | M& L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed |
| 76 | M & L for 50mm thick PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in sub base of floors complete all as specified and directed |
| 77 | Use and removal of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams, bases for drying beds, bases of tanks, bases of coarse screen and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed. sides of concrete |
| 78 | Use and removal of steel formwork to sides and soffits of floor or roof beams, beam launchings, lintels,cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for fair finished surfaces of concrete complete all as specified and as directed. |
| 79 | M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. |
| 80 | M & L for Cement concrete tiles 30cm x 30cm x 20-22mm thick,machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with mixuture of white & grey cement in equal proportions and no pigments laid over and including 15mm thick screed bed in CM 1:6 complete all as directetd |
| 81 | M & L for Plain cement concrete Type B-1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate as in lintels up to 1.5m span, Cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed. |
| 82 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. (Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.) |
| 83 | Removal of excavated material [Soil] to a distance not exceeding 250m but not exc 500m and depositing where directed complete all as specified and as directed. |
| 84 | S & F Mild steel rag or lewis bolts,screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised,exc30cm long and dia of neck 25mm |
| 85 | S & F wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and similar work conforming to Fe 290 Grader E-165 complete all as directed |
| 86 | S & F 4mm thick coloured aluminium composite channel [ACP] as in wall cladding / roofing / paneling / ceiling, etc including necessary frame work and fittings and fixtures as per manufacturers instructions complete all as directed. |
| 87 | S & F 0.71mm thick Plain, Aluminium sheeting,Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) to match with exisating location complete all as directyed |
| 88 | S & F 160mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling or laid in floors including taking down old pipes complete all as specified and directed. |
| 89 | M & L for 160mm bore PVC (SWR) bends any radius complete all as specified. |
| 90 | Dismantling framed trusses of span not exc 10m complete all as directed |
| 91 | Dismantling wrought iron or mild steel structural work of any description not otherwise provided for complete all as specified and as directed |
| 92 | DismantlingPlain or corrugated steel sheeting, anygauge,thickness,including Nainitalorsimilarpatternroof coverings complete all as directed |
| 93 | S & F of bold metallic stanless steel letters and alphabets made with SS plain sheet made out of 22 gauge thick and 304 grade of width not less than 50mm, depth/thickness not less than 20mm based on heifght of letter (hollow section made to shape by using computerised cutting) the height of letter/alphabet shall not be less than 15\" in hindi and english languages and fixed on granite / MS / ACP wall cladding / tiled finished walls elevated from the surface complete all as directed the engineer-in-Charge |
| 94 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in columns, pillars, piers, posts, etccomplete all as directed |
| 95 | Use and removal of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed. |
| 96 | M & L for 20mm thick granite tiles machine cut as in skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 97 | Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 98 | SCHEDULE \"A\" PART-II [E/M Works]:M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area)1100V grade drawn through and including non metallic concealed PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of flush type metal GI boxes, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell / 5 Amps socket point controlled by one, one way switch complete all as specified and directed. [Note:Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required] |
| 99 | All as per item No.98 above but suitable for one 5 Amps socket on independent board |
| 100 | All as per item No. 98 above but point wiring with4.0 Sqmm (nominal area) suitable for one power socket point on independent board complete all as specified and directed. |
| 101 | M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 1.5 Sqmm, drawn through and including PVC casing caping of suitable size with necessary accessories including provision of 1 run of 2.5 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor complete all as specified and directed. [NOTE: 3 runs of 1.5 Sqmm copper wire and 1 run of PVC casing caping shall be measured as one unit length.] |
| 102 | M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 4.0 Sqmm, drawn through and including PVC casing caping of suitable size with necessary accessories including provision of 1 run of 4.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor complete all as specified and directed. [NOTE: 3 runs of 4.0 Sqmm copper wire and 1 run of PVC casing caping shall be measured as one unit length.] |
| 103 | S & F modular switch single pole, 1 way, 6 Amps, 1 module |
| 104 | S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed |
| 105 | S & F modular socket outlet, 6 Amps, 2/3 pin combined 2 module |
| 106 | S & F modular Fan step regulator, 120W - 2 module |
| 107 | S & F White cover plate with frame,3 module |
| 108 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including alloy steel \"D\" hook hanger (heavy duty) with 75mm fasteners with clamps, nut, bolts and locking pin for hanging ceiling fan complete all as directed |
| 109 | Supply, install , testing and commissioning of four star rated hi wall split AC unitsindoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality having eco friendly refrigerant gas R410A.R134A, copper condenser coil, EER 3.2.of capacity 1.0 TR with and including necessary bracket and Voltage stabiliser for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 to 250 Volts with output voltage stabilised at 230 Volts with accuracy of + 2.5% and of capacity 4 KVA complete all as specified and directed by the Engineer-in-Charge. |
| 110 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as directed |
| 111 | S & F copper tubing of 1/4\" dia suitable for suction line of Aplit AC / tower AC complete all as per existing complete all as directed |
| 112 | S & F copper tubing of 1/2\" dia suitable for suction line of Aplit AC / tower AC complete all as per existing complete all as directed |
| 113 | Supply, install , testing and commissioning of four star rated hi wall split AC unitsindoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality having eco friendly refrigerant gas R410A.R134A, copper condenser coil, EER 3.2.of capacity 2.0 TR with and including necessary bracket and Voltage stabiliser for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 to 250 Volts with output voltage stabilised at 230 Volts with accuracy of + 2.5% and of capacity 5 KVA complete all as specified and directed by the Engineer-in-Charge. |
| 114 | S & F LED tube light fittings, retro bar professional WH 5700K to 6200K and 1800 to 2000 lumens of cool white comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 115 | S & F SPN DB 6 way with 200 Amps rated bus bar double door |
| 116 | S & F MCB, SPN, 32 Amps, 240 Volts \"C\" curve |
| 117 | S & F MCB, SP, 6 to 32 Amps, 240 Volts \"C\" curve |
| 118 | Supply and Laying LT XLPE insulated, PVC sheathed, bedded, galvanised steel strip or wire armoured, heavy duty, electric power cables of size 2 core 6 Sqmm, 1100 volts grade, with aluminium conductor laid in trenches / passing through pipe / duct / fixed on walls complete all as specified and directed. |
| 119 | M&L for Sand filling in trenches using dry river sand as cushioning to under ground cable including spreading, levelling and consolidation complete all as specified and directed.[Note: Punned thickness of sand shall only be measured.] |
| 120 | Supply and laying precast concrete cable covers, class LV type 1, flat of size 250x150x40mm |
| 121 | M & L for laying 25mm dia GI pipe light grade laid in trenches / walls as in cable protection including sealing both ends complete all as directed |
| 122 | S & F Energy efficient & Long life LED flood light luminaire of 170 watts, 230 V, outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including fixing arrangements complete all as specified and as directed. |
| 123 | S & F 4 Pole PVC MCB box with cover IP65 protection complete all as directed |
| 124 | M & L for 2 core 2.5 Sqmm SPVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories fixed through Walls including necessary clamps, connectors or lugs having connection from existing nearby DB complete all as specified and as directed. |
