Tender for In Awas No. 10 located on Kalidas Marg, a bathroom/toilet should be constructed in one room for the security personnel and a cow shade and chamber should be constructed in the lawn and other necessary repair works should be done. - Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DAR.No-2.1.1, 2 Providing and laying in Position Cement Concrete of Specified Grade excluding the cost of Centering and shuttering all work up to plinth level 1:5:10 (1 cement, 5 Coarse sand (Zone-lll)Derived from natural Sources : 10 graded Stone aggregate 40 mm nomical size Derived from natural Sources ) DAR N0-4.2.8, 3 Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.1.1 4 Provoding and Laying Damp Proof Course 40 mm thickwith Cement concrete 1:2:4, ( 1 Cement, 2 Coarse Sand (Zone-lll) Derived from natural Sources : 4 graded Stone aggregate 12.5 mm nomical size Derived from natural Sources ) DAR N0-4.10, 5 Brick work with Common burnt clay F.P.S. (Non Modular ) bricks of Class designation 7.5 in Superstructure above plinth level up to floor V level in all shapes and size in Cement Mortar 1:4 Cement and Coarse sand in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.4.1, 6 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources. DAR N0-5.3, (Lintels, Columns, Pillars, Slab) 7 Steel reinforcement for R.C.C. workincluding Straightening, Cutting, Bending, Placing in position and binding all Complete upto Plinth Level. Themo-Mechanicaily Trated Bars of grade Fe-500D or more.DAR-5.22C.1, 8 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.4.1, 9 Providing Reinforced by Organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, mor L hooks, bolts and nuts 8 mm dia. G.l. Plian and bitmen washers or with self drilling fastner and EPDM washers etc. complete (excluding the cost of purling, rafters and trusses) including cutting sheets to size and shape wherever required. DAR-12.8, 10 Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2, 11 Providing and fixing One Piece construction white vitreous china squatting Plate with an integral longitudial flushing pipe, with PVC automatic flushing cistern, with fittings, standers size G.l./PVC flush pipe for back and front flush with standred spereader Pipe with fittings, G.I. Clamp and C.P. brass coupling complete. including painting of fittings and cuttings and making good the walls and floors etc. wherever required. Range of four Squatting plates with 10 litre P.V.C. automatic flushing cistern. (17.6.4) 12 Providing and fixing of Short body Two way Bib Cock, L&K Make 15 mm dia (257A) including supply of all material, labour, T&P etc. complete. 13 S/F 15mm dia C.P. brass Angle valve of L&K make ( Code- 0077 ) including supply of all material, labour, T&P etc. complete. 14 S/F 15mm dia C.P. brass Central hole basin mixter with Casted Spout of L&K make (Code-0427) including supply of all material, labour, T&P etc. complete. 15 Supply and fixing of White Glazed earthen ware wash hand basin with pedestal (Paryware/Cera/ Johnson Topaz make) with PVC waste pipe, bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work (22X16 size). 16 Providing and Fixing of 15mm dia C.P. brass Bib cock, long Body, (L&K Make-0047) including Supply of all material, labour, T&P etc. complete. 17 S/F of C.P. brass towel ring, of L&K make including supply of all material & labour and T & P etc. requird for proper completion of work. 18 S/F ofC.P. Glass shelf 22 of L&K Make including supply of all material & labour and T & P etc. requird for proper completion of work. 19 S/F of C.P. brass Soap Dish, of L&K Make including Supply of all material, labour, T&P etc. required for Proper completion of the work. 20 S/F 15mm dia C.P. health faucet with 1.00 meter Flaxible Tube & Hook of L&K make including supply of all material, labour, T&P etc. complete. 21 S/F of C.P. brass Towel Rack longof L&K make including supply of all material & labour and T & P etc. requird for proper completion of work. 22 S/F of C.P. tumbler holder, of L&K make including supply of all material & labour and T & P etc. requird for proper completion of work. 23 Supply and Fixing of S.S. Jali 125 mm dia, 24 Supply and Fixing ofPVCNahani Trep, 25 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). 26 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2, 27 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal outer dia pipe )18.8.3, 28 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 75mm dia meter. 29 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110mm dia meter. 30 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. DAR-12.52.4, (Rs-1207.04) 31 Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I) decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws. DAR N0-9.20.1, 32 Providing and fixing Glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick DAR-9.9.1.1, 33 Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), 34 Wall Painting with Premium acrylic emulsion paint of Interior grade, having VOC (VolatileOrganic Compound) Content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. Two Coat, DSR.N0-13.83.2), 35 Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade New Work. (Two or More Coats applied @1.43 ltr/10 sqm Over including priming coat of exterior primer applied @ 0.90 litre/10sqm), (DSR N0-13.47.1), 36 Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coatson new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1), 37 Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.40) 38 Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DAR-8.31), 39 Providing and laying Interlocking Concrete Block Pavement having thickness 80 mm as per drawings and technical specification Clause 1504,(Exclusive G.S.B) (Ch-25, Sl.N0-34), Rs-980 40 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DAR No-15.60
