Tender For Construction Of 11Kv Overhead Line In Sector-149, Noida - Supply Of Steel Tubular Pole 11 Mtrs Long Designated At 410-Sp- 56 In 1:3:6 Cement Concrete Foundation Including Excavation Back Filling Etc Complete In All Respects Uperc P-30 2 Erect, noida-Uttar Pradesh

Construction Of 11Kv Overhead Line In Sector-149, Noida - Supply of steel tubular pole 11 mtrs long designated at 410-SP- 56 in 1:3:6 cement concrete foundation including excavation back filling etc complete in all respects UPERC P-30 2 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre DSR Electrical 2018/I.No. 11.3.4 3 Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respectsP.S. No. 627 4 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect.P.S. No. 628 5 Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, staynsulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.. P.S. No. 630 6 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing ead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS No. 725 (B) 7 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.PS No. 717 8 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. PS No. 1109 9 Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required . DSR Electrical2018 item No. 12.10 10 S/F of 11 KV Pin 12 long with insulator of Jai shree/BHEL on cross arm fixed on HT pole including all T/P etc UPERC P No 26 I No 7 11 S/f of 11 KV Disc insulator for 11KV Overhead lines with galvanished insulator fittings, ball and socket type and complete with galvanished stain clamp, bolt nut, washer etc. as required DSR-2018/13.11 12 S/Laying of heavy density poly ethylene pipes ISI marked anti rediant grade OD 160mm dia PN-8 PE 100 (PE 400) grade as per IS code 4984 with excavation at a depth of 1.20 Mtr below ground level i/c the cost of cutting of pipes for making up to length and making joints complete all respects as per direction of E/I. (AOR) 13 S/F of straight MS channel 50x100 mm (9.2 per kg) 1.5 mtrs long including S/E of suitable clamp made of MS flat 50x6 mm including all nuts and bolts fixing on pole. T off channel UPERC P-48 14 Supply of Top MS Channel 100x50x2240mm as per design complete in all respects UPERC P-39 15 Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. E/I E/I DSR Electrical-2018. 12.38 16 Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. PS No. 634 17 Numbering of poles with combination of yellow and black colour paint etc complete in all recpects as per direction of E/I (AOR) 18 Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.PS 506 (F) 120 sq. mm 3 core 19 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 120 sq. mm DSR Electrical-18 10.5.2 20 Supply and fixing of F Bracket. Complete in all respect as per direction of E/I. UPREC P-45 21 Providing and laying of200mm dia 6mmthickness through trenchless method including jointing of pipe, excavation of thrust pit and receiving pit of required size with all T & P and the excavation & back filling with compaction complete as per specification for road crossing by H.D.D machine method pipoe will be installed at minumum depth 2M to 3 m below the ground surface or downward as per site condition in required slope.(AOR) 22 Demolishing Cement Concrete manually by mechanical means including disposal of material within 50 mtr lead as per direction of Engineer-in-Charge, Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR Civil 15.2.1 (AOR) 23 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate moorum screening, red bajri and labour required. i) bituminious portion (AOR) 24 ii) water bound macadam (AOR) 25 Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I.No. 5.07/S.N. 279 26 Cement Concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I.No. 5.08/S.N. 281

INR 2124 /-

INR 94500.0 /-

INR 47.23 Lakhs /-