Tender for Removing Shatigrast door/door in house number-24 located in Gautam palli colony, increasing the height of the front door and installing door doors, expanding the kitchen and laying slab, removing the wall of the drawing room and expanding the room, making Shatigrast boundary wall at the back, installing a UPVC window in the veranda, putting shades in the washing area and other necessary various repair works of the house - Dismantlingdoors,windowsandclerestorywindows(steelorwood) shutterincludingchowkhats,architrave,holdfastsetc.completeand stacking within 50 metres lead : Of area 3 sq. metres and below DSR No 15.12.1, 2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge, In lime mortar DSR No. 15.7.3, 3 DemolishingR.C.C.workmanually/bymechanicalmeansincluding stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR No. 15.3, 4 Providing wood work in frame of doors, window, clerestory window and other frames,wrought framed and fixed in posotion with hold fast lugs or with dash fasteneres of reqiured dia & lenght (hold fast lugs or dash fastener shall be paid of separately (Sal wood,DSR-9.1.2), 5 Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws.DSR N0-9.21.2, 6 Supply and fixing of Stenless Steel Door and Window Fittings as Sliding Bolt, Tower Bolt, Handles etc. Complete as Direction of i/c. 7 Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DSR.No-2.1.1, 8 Providing and laying in Position Cement Concrete of Specified Grade excluding the cost of Centering and shuttering all work up to plinth level 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) 10 graded Stone 40 mm nomical size Derived from natural Sources ) DSR N0-4.1.10,Rs. 5149.39 9 Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DSR.No-6.1.1, 10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 Cement: 2 coarse sand zone-III) derived from natural sources: 4 graded stonr aggregate 12.5 mm nominal size derived from natural sources) DSR No. 4.10, 11 Brick work with Common burnt clay (Non Modular ) bricks of Class-150 in Superstructure above plinth level up to floor V level in all shapes and size in Cement Mortar 1:4 Cement and Coarse sand in including Supply of all materials labour T& etc required for proper completion of work as per DSR.No-6.4.1, 12 12mm. Thick plaster with cement mortar in proportion of 1:4 cement & coarse sand DSR no 13.4.1, 13 Centering and shuttring including strutting, Propping etc. and removal of from for suspended floors, roofs, landings , balconies and access platform. DSR-5.9.3, 14 Reinforced cement concrete work in beams, suspended floors, roofs having slop up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size derived from natural sources. DSR N0-5.3, 15 Steel reinforcement for R.C.C. workincluding Straightening, Cutting, Bending, Placing in position and binding all Complete upto Plinth Level. Themo-Mechanicaily Trated Bars of grade Fe-500D or more.DSR-5.22C.1, 16 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate, DSR No. 11.3.1, 17 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen plateform, vanity counter, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement: 4coarseSand) Joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbring, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite Stone slab of Colour black, Cherry/Ruby red Area of slab upto 0.50 sqm. DSR No. 8.2.2.1, 18 Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete. Size of Tile 600x600 mm. (DAR-11.41.2) 19 Providing and laying Floor/wall tiles sizes-300x600 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) jointing with Grey Cement slurry @3.3 kg/Sqm including Grouting the joints with Cement and matching Pigment etc. complete, as per direction of Engineer-in-charge. (Kajaria/Johnson/RAK Premium quality) 20 Providing CorrugatedG.S. Sheet roofing including Vertical /Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters andand trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DSR N0-12.1.1 21 Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR N0-10.2 22 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @1.43 ltr/10sqm) over existing cement paint surface (apex Ultima, weather coat All guard). (DSR N0. 13.112.1), 23 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR No-15.60
