|
| 1 | Scarifying or pickinggraveled macadam or bituminous macadam surfaces in areaexc. 400 sqm ,exc. 50mm and not exc. 100 mm deep complete all as specified and directed. |
| 2 | M&L for applying evenly a priming/ tack coat with bituminius primer @ 10.00 Kg per 10 Sqm complete all as specified and directed. |
| 3 | M&L for preparation ofsurfaces of existing black top surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc andM&L for applying evenly a tack coat with bitumenous primer using paving bitumen at the rate of5 kg / 10 sqm and M&L forpremixed hot mix Asphaltic Semi DenceConcreteusing 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) includingrolling with 8to 10 tonne power road roller to uniform and smooth surfaceand consolidation to required gradient and camber all as specified and directed. |
| 4 | Note1 : Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus sideadopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver,finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only)(iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account. |
| 5 | M&L for premix bituminous macadam (consolidated to average thickness 75 mm or less) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed.NOTE: -(i)Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account.(ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only. (iii) Any variation in binder content on minus side shall be adjusted @ of Rs 50.00 per kg of binder. No adjustment in price shall be made if the variation is on plus side |
| 6 | M&L for making lines, dashes,arrows,letters etc exceeding 10 cm wide on bituminous/concrete surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, not less than 2.50 mm to 3.00mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufacturer\"s instruction including preparation of surfaces i.e cleaning of surface by removing all dust,dirt,oil grease etc complete all as specified and directed. (Make:- Shalimark of STP Ltd or M/S Kataline Infra Product Pvt Ltd or equivalent as approved by GE) (Note :- The rate included for provision of red signals to keep off traffic from wet paint cleaning road surfaces and working during odd hours when traffic is light. |
| 7 | S&Fcat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. complete all as specified and directed.(Make Suneyes/Darkeye/3M.Alcolite/Solar) |
| 8 | S& FSolar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm X125mmX 25mm (shank 65mm) of high efficincy mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battary (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 MCD completed as per manufactures instruction etc complete all as specified and directed.(Make Suneyes/Darkeye/3M.Alcolite/Solar) |
| 9 | M&L earthwork in excavation by mechanical means (hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 Sqm on plan) in all kind of soil including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m as sirected by Engineer in charge. |
| 10 | M&Lfor Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed includingwatering as required complete all as specified and directed. |
| 11 | M&Lfor 80mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-40 grade of approved shape, size and colourconforming to IS 15658-2006over and includingjoints filled with sand and stone dust 30mm thick as in levelling course of interlockingcomplete all as specified and directed. |
| 12 | M&L for PCC(1:4:8) type D2 ( Using 40mm graded aggregate ) as in foundations,filling and mass concrete and any other location etc. including demolition of PCC completeall as specified and directed. |
| 13 | M&L for providing precast cement concrete kerb stone/blocks (machine pressed), solid cement concrete type B1, 1:2:4 (using 20mm graded crused stone aggregate) finished at top bullnosed shape and finished surface even and smooth and joineted in cement moratr 1:4 stuck finished including necessary earth work complete all as specified and directed. |
| 14 | M&L PCC 1:2:4 types B-1 using 20mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weatherig, slightly rounded or chamfered angles and throating, as directd including necessary use and waste of form work, complete all as specified and directed. |
