Tender for Lohamandi Zone Room No. 83 Construction Work Of Mens Toilet Near Railway Line In Ahirpada Under Rajamandi Area - Earth work in Cutting or in embankment in rodinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required lavels and slops and also including 1.5 m lift and 30 m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge etc. all complete. (20-Chapter PWD.SCH.No.253(a))PWD Sheduled 2018 2 Cartage of ballast, Kankar, Coat, Grit or sand etc. including loading and unloading but excluding stacking on pucca roads.up to 8 Km distance 3 Providing and laying cement concrete in 1:5:10 (1 cement :6 fine sand 12 stone ballast 40 mm gauges) and curing complete, including cost of form work in foundation and floors. (5-Chapter S.I. No. 273) PWD Shedule 2018 4 Class-150 brick work in 1:6 cement and Coarse sand 1.25 fineness modulus mortor in Foundation including supply of all material, labour and tolls and plants etc. All complete. (S.I. No. 303) 5 Providing and laying D.P.C. 40cm. Thick with cement concrete consisting of one part cement 1.5part of coarse sand and three part of approved 10mm grade stone grit and including water proofing material as directed by the engineer-in-charge in the proportion as specified by the manufacturer. {Chapter No.07 Si.No.361B} 6 Renforced cement concrete work in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircases and spiral stair cases above plinth, level up to floor five level, including cost of centering, shuttering,Finishing and Reinforceement with 1:1½:3{1 cement : 1½ coarse sand (zone-III): 3 graded stone} S.I. No. 5.3 7 Class-150 (Non Modular) brick work Super Structure in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labor T&P etc. required for proper completion of work. (S.No. 6.1.1) 8 R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 (One Part of Cement, Two Part of Coarse Sand and Four Part of 2cm Stone Grit) in heavier beam I.e. having span more than 6 meters supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than m-150.(5-Chapter PWD SCH.No.286) 9 R.C.C. work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement. All work up to plinth level : 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (S.I. No. 5.1.3) 10 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (b) 10mm to 12mm tor.(Chapter No. 10 S.I. No. 504(B)) 11 12mmcement plaster in single coat on rough site of single of half brick wall for interior plastering up to floor to level including internal rounded angles not excluding 80mm in girth and finished even and smooth. (b) 1cement : 6 Coarse sand.(Chapter No.13 Si.No. 583 (iii)) 12 Finishing wall Putty Aproved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all material. (15-Chapter Si.No.27 New) 13 Finishing wall withTextured exterior emulsion paint (Apex) approved brand and manufacture and of requires shade on undacorted wall surface to give even shade over @ 1.25 Ltr. per 10sqm including one coat of primer applid @ 0.75 Ltr per 10 Sqm coat curing and cost of all material. labour etc. required for proper completion of work. for two coat. 14 Mild steel of iron in heavy size such as trusses built up gates record reck, roof work gates etc. brought to required form including drilling holes revitting are welding where neccesary, and also including supply of steel bolts , nuts wastage etc. and there fixing required for completion of the work. (Chapter No.10 S.I. No.503) 15 Providing and fixing in position collapsible steel shutters with vertical channels 20.10.2mm and braced with top an bottom rails of Trion 40.40.6mm with 38mm dia steel pulleys with bolts, nuts locking arrangement, stoppers, handles complete including applying a priming coat of approved lead paint. (Chapter No.10 Si.No.4-518) 16 Supply & fixing of flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplies deparmentally.(a) 32mm thick. {Chapter No.09 S.I.No. 470(a)} 17 Supply and Fixing Oxided Iron Fitting etc. all complete (None Scheduled) 18 Providing and fixing of door & ventilater etc. all complete. (DSR No. 9.6.1) 19 Paint of the two coat over priming coat including cost of priming coat new steel gril etc. all complete.(15-Chapter Sr.No.1a+2a+642) 20 Providing and Laying Vitrified Tiles 500x500mm Size(thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints etc. all complete. (Chapter No.14 Sr.No.13 New Item) 21 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm Sand Cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required : White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with with integral type foot rests. (Chapter No.24 SI. No.1) 22 Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. (Chapter No.24 Si.No.3A) 23 Supply and fixing Pvc. sintex water tank etc. All complete. (19-Chapter Sr.No.2) 24 Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete.110mm diameter. (Chapter No.23 SI.No. 32(iii)) 25 Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete.140mm diameter. (Chapter No.23 SI.No. 32(iv)) 26 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 32 mm nominal outer dia pipes.(Chapter No.23 SI.No.8D) 27 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 25mm nominal outer dia pipes.(Chapter No.23 SI.No.8C) 28 Supply & Fixing of brass Bib Cock of approve quality etc. all complete. (Chapter No.21 Si.No.43) 29 Supply & Fixing of C.P. brass Stop Cock (Conceled) of Standerd design of approve quality etc. all complete. (Chapter No.21 Si.No.44) 30 Supply and Fixing of Light Fitting Switch Board. (None Sheduled) 31 Supply and Fixing Wiring of Light Point. (None Sheduled) 32 S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. 33 Supply & Fixing of wiring Sub Main. 34 Supply & Fixing of Plug Power Point 15mm. 35 Lettering & Painting of wall etc. all complete. 36 Supply & Fixing of 27watt. CFL etc. all complete. 37 Constructingbrick masonary chamber for underground C.I. inspection chamber and bends with bricks in cementmortar 1:4 (1 Cement : 4 Coarse Sand) C.I. cover with frame (light duty) 455x610mm Internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. top slat with 1:2:4 mix (1 Cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1 :5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortal 1:3 (1 Cement : 3 Coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard desing: (a) Inside dimensions 455x610mm and 45cm deep for single pipe line : With Common burnt clay F.P.S. (non modular) bricks of class designation M-150). {Chapter No.25 Si.No.7a) 38 Constructingbrick masonary chamber for underground C.I. inspection chamber and bends with bricks in cementmortar 1:4 (1 Cement : 4 Coarse Sand) C.I. cover with frame (light duty) 455x610mm Internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. top slat with 1:2:4 mix (1 Cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1 :5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortal 1:3 (1 Cement : 3 Coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard desing: (c) Inside dimensions 600x850mm and 45cm deep for pipe line with three or more inlets : With Common burnt clay F.P.S. (non modular) bricks of class designation M-150). {Chapter No.25 Si.No.7c) 39 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc. (A)15mm nominal outer dia pipes. (Chapter No.23 Si.No.8A) 40 Supply & Fixing GraniteBoard 2.5x4 Size Display Board including Painting, Lettering etc. all complete. (None Schedule) 41 Sub Total (A) 42 Deduction Cost of old brick 43 Deduction Cost of old brick bats 44 Sub Total (B) 45 Sub Total (A-B) = (C) 46 Add/Deduction Rs. For Estimate Figure Amount Match 47 Grand Total
