|
| 1 | SCHEDULE OF WORKS AND BOQ |
| 2 | BILL OF QUANTITIES FOR CIVIL/ELECTRICAL/NETWORKING AND ALLIED WORKS |
| 3 | Scrapping the existing painted surface with wire brush/putty blades/sand paper/etc and removing the old paint neatly as per the directions of the Engineer-in-charge |
| 4 | Painting with cement primer of approved quality one coat after preparing the surface for painting including scrapping, cleaning etc. complete. Brand : Asian/Berger/Dulux/Nerolac. |
| 5 | Finishing the wall surfaces with acrylic putty to get a required finish as per the directions of the Engineer-in-charge. Brand: Asian/Berger/Nerolac. |
| 6 | Painting with acrylic emulsion paint (interior quality) of approved brand (Roller finish) @ 1.67 ltr/10 Sqm on old/new surface of walls. 2 or more coat.Brand:Asian/Berger/Dulux/Nerolac |
| 7 | Painting with Synthetic enamel paint of approved quality two or more coats on old/new surface of inside and outside doors, after scraping and cleaning the surface. Brand : Asian/Berger/Dulux/Nerolac. |
| 8 | Labour charges for removing of existing electrical items(15m case & capping,15m electrical wiring, 2 sets of sockets & switches, 2 nos. of ceiling fans, 3 nos. of tube lights). |
| 9 | Supply and installation of ceiling gridtiles (false ceiling) with 15 mm thick mineral fibre 600 x600 mm tile of approved make after removing existing false ceiling tiles. |
| 10 | Providing and laying colored full body Vitrified Tiles (600x600mm), stain free/nano finish in flooring/skiriting of different sizes to cover an area of 3m x 4.1m and conforming to IS 15622 in approved color and shade laid on 40 mm thick cement mortar 1: 4 and grouting the joints with matching colour epoxy joint filler, including preparation of base surface, cleaning and finishing at all heights. Basic rate of tile is Rs.75/Sqft.Make: Somany, Kajaria, Nitco or approved equivalent. |
| 11 | Providing and fixing homogeneous Poly Vinyl Chloride Sheet (Antithetic Floor Sheet) of thickness 1.6 to 2mm in flooring and skirting in all floors in approved pattern on a smooth and damp-proof base using rubber-based adhesives of approved quantity and manufacture like Dunlop S-758 Fevicol SR998 or equivalent including surface preparation, cleaning & filling with JK putty / POP if required and rolling with light wooden roller weighing about 5kg all complete as directed by the Engineer-in-charge. Area to be covered: 3mx4mMake : Tusker or equivalent good quality |
| 12 | Providing and fixing Aluminium Work for doors and partitions with extruded built up standard tubular and other sections of approved make conforming to I.S.733 and 1285 anodized transparent or powder coated to required shade according to I.S. 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections (thickness should be 1.5mm) shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws all complete as per architectural drawings/directions of Engineer-in-charge. (Glazing and panelling to be paid for separately).Size of ACP Partition : 3m x 3mSize of door : 90cm x 210 cm |
| 13 | Supply and fixing of 3mm coloured ACP panels for partitions,doors and ventilators using appropriate fixing clips etc. complete as directed by the C-DAC official. Size of partition : 3m x 3m |
| 14 | Providing and fixing plain Glass (Modifloat or equivalent as approved by Engineer-in-charge for aluminium partitions, doors, windows, ventilators etc fixing with PVC/Neopreme gasket etc. Complete. 5mm thick glass. Size of door : 90cm x 210 cm |
| 15 | Supply and installation of Aluminium/steel Handle, Lock with key, Door Closer, for one door only. |
| 16 | Supply and fixing Etch Film (Garware or equivalent) of approved strip pattern for glazing panels of ACP partition and Glass Door. |
| 17 | Dismantling (cutting) existing brick/solid block wall including hacking of the mortar base and sub layer and making good the floor surface to receive new floor finish, disposing of unserviceable materials from the campus as directed by the engineer-in-charge. Cutting area (approx.) : 1.2m x 2.4m |
| 18 | Reinforced cement concrete (RCC) work for beams, chajjas, lintels, slabs, plain window sills etc including the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) in any floors for maintenance works. Rate of steel reinforcement will be paid separately). |
| 19 | Labour charges for dismantling existing glass windows and metal grill as directed by C-DAC officialWindow size : 1.2m x 1.2m; Grill size : 1.2m x 1.2m |
| 20 | Construction of Brick Work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in wall in cement mortar 1:5 (1 cement: 5 coarse sand) |
| 21 | Providing and applying 12mm to 15mm Cement Plaster of mix 1:4 (1 cement : 4 fine sand) finished with a floating coat of neat cement on all surfaces such as concrete walls, brick walls, columns, beams etc; at all heights. |
| 22 | Supply and fixing of color coated corrugated Roofing Steel Sheet of Tata/Jindal or approved equivalent of 0.40mm thick of approved size and colour, all accessories required for completing the roof work like Tap-screw with self-drilling fasteners/j-hooks/L hooks, nuts, washer etc. fixing the GI frame work on the existing wall with MS plate and anchor bolts fixed on concrete base including the cost of appropriate purlins, rafters, trusses, MS plates, angles etc. complete the work as per design and directed by the engineer-in-charge. The rate includes cutting, hoisting, fixing in position and applying two coats enamel paint on GI frame after a priming coat of approved steel primer, including welding etc. complete. Use (2x11/2)\" rafters and (11/2x1)\" purlins of 16 guage. Jindal/Appolo/Tata GI sections. |
| 23 | Supply and installation of 5 numbers of Wooden Workstation (custom-built table set) made with 25mm marine ply laminated with 1.0mm thick laminate of approved design and shade, with matching 2mm thick PVC edge banding on the exposed sides and other sides with 0.8mm thick PVC edging and shall be supported by modesty panels (vertical panels) and metallic bars. The vertical panels are to be made with 25mm marine ply laminated with 1.0mm approved laminate using metallic brackets, provided with cable managers and cable trays to pass wires, etc. as per drawings/instructions of the Engineer-in-charge. Make: Marineply- Century, Greenply, Kitply Laminate: Century, Greenlam, Kitply |
| 24 | Supply of Office Chairs with headrest with following specificationFrame Material: Use powder-coated steel or aluminium for durability and corrosion resistance.Seat Cushion: High-density foam (minimum 30 kg/m³) for comfort, with a minimum thickness of 2-3 inches.Seat Backrest: Foam or molded polypropylene with adequate lumbar support and adjustable headrest for ergonomic design.Covering Material: Use upholstery fabrics such as Polyester, Vinyl or Leather:Headrest: Must be height and angle adjustable for comfort and proper support.Legs: Metal (steel/aluminum) designed for stability and to support the chair\"s weight (at least 100 kg).Base Design: Five-point caster base or a stable four-leg design, depending on the chair type.Finish: Powder coating or anodizing for corrosion resistance.Ergonomics: Ensure seat height is adjustable (typically between 16 to 20 inches from the ground). Seat depth should be 15 to 18 inches for proper leg support. Contoured seat design for better weight distribution and comfort.Weight Capacity: Ensure the chair meets a minimum load-bearing capacity of 100 kg.Stability: Design should comply with standards for stability and resistance to tipping (such as ANSI/BIFMA).Materials Safety: All materials used should be free from harmful chemicals and comply with health and safety standards. |
| 25 | Supply and installation of Mobile Pedestals with 400W X 450D X 650HT (mm) dimensions, with frame material of powder coated aluminium. Colour shade should match the colour the of the Wooden Workstation. |
| 26 | Supply and installation of 3-Phase 4-way Double Door Distribution Box with Phase Selector (Mains DB) for housing the followingPhase Selectors – 3 nos.4 Pole 100A MCB – 1 no.4 Pole 100A RCCB – 1 no.2 Pole 63A MCB – 1 no.Single Pole 25A MCB – 4 nos.Single Pole 6A MCB -4 nos.Phase Selector Switch – 3 nos.Generator Auto Switcher – 1 no. |
| 27 | Supply and installation of 18-way SPN Double Door Distribution Box (UPS DB) for housing the following2 Pole 50A MCB – 1 no.2 Pole 40A MCB – 1 no.2 Pole 25A MCB – 1 no.Single Pole 10A MCB – 1no.Single Pole 2A MCB – 5 nos. |
| 28 | Supply and installation of 4-way SPN Double Door Distribution Box (AC DB) of size for housing the followingAC Timer Switch - 1 no. |
| 29 | Supply and installation of 15kVA AMF and associated accessories for automating the operation of existing single-phase 15kVA diesel generator (DG Make : Jaycee TMTL , DG Model :220A0-EG015) |
| 30 | Supply and installation of Automatic Phase Selector 100A with following spec(a) 3-Phase to 1 phase selector.(b) Current Rating100 Amps(c) Operating Voltage230 Volts (AC) |
| 31 | Supply and fixing of the following rating, 230/415 volts, RCCB/ELCB, having a sensitivity current up to 100/300 mill amperes in the existing MCB DB complete with connections, testing and commissioning etc Make: ABB/ Legrand/L&T/Havells |
| 32 | Four Pole, 100A, Type C |
| 33 | Double Pole, 100A, Type C |
| 34 | Supply and fixing of the following rating MCB - C curve, suitable for inductive load of following poles in MCB DB complete with connections, testing and commissioning etc. as required. Make: ABB/Legrand/L&T/Havells |
| 35 | 4 Pole, 100A MCB |
| 36 | 2 Pole, 63A MCB |
| 37 | 2 Pole, 50A MCB |
| 38 | 2 Pole, 40A MCB |
| 39 | 2 Pole, 20A MCB |
| 40 | Single pole, 25A MCB |
| 41 | Single pole, 16A MCB |
| 42 | Single pole, 10A MCB |
| 43 | Single pole 4A MCB |
| 44 | Single pole 2A MCB |
| 45 | Supplying and fixing modular blanking plate (1M) on the existing modular plate & switch box excluding modular plate as required. Make: Crabtree/Schneider/legrand |
| 46 | Supply & fixing of single pole MCB dummy for D.B as required. Make: ABB/Legrand/L&T/Havells |
| 47 | Supply and fixing of following modular switch/socket on plate connections required. Make: Crabtree/ Schneider/ Legrand |
| 48 | 6/16A Socket |
| 49 | 5A Universal Socket |
| 50 | 16A One-way Switch |
| 51 | 10A One-way Switch |
| 52 | Supply and fixing of following modular plates with box on modular partition or brick wall for connection.Make: Crabtree/Schneider/Legrand |
| 53 | 12 M modular plate |
| 54 | 8 M plate |
| 55 | 2 M plate |
| 56 | Supply & laying of following wiring (3 run) for power circuit, UPS circuits (Servers, Desktop Computers, TV, CCTV System, Access Control, etc.), AC/Light/Fan/etc. using copper wire along with earth copper wire in the following sizes of FRLS PVC insulated copper conductor, single core cable. Wiring through case & capping. Preferred Colours: Line - Red, Neutral - Blue/Black, Earth -Green/GreyMake: V-Guard/RR/Finolex/Havells |
| 57 | 3 x 1.5 sq. mm wire (Line-Neutral-Earth) |
| 58 | 3 x2.5 sq. mm (Line-Neutral-Earth) |
| 59 | 3 x 4 sqmm (Line-Neutral-Earth) |
| 60 | 3 x 10 sqmm(Line-Neutral-Earth) |
| 61 | 3 x 25 sqmm(Line-Neutral-Earth) |
| 62 | Supply and fixing of following Casing and Capping for electrical wiring |
| 63 | 25 mm Casing & Capping |
| 64 | 32 mm Casing & Capping |
| 65 | Supply and installation of Chemical Earthing with following spec(a) Diameter of the pipe: 50 mm(b) Thickness of the pipe: 3.2 mm(c) Length of pipe : 3000 mm(d) Size of the conductor: 40 x 6 mm copper (99% Pure), length 2100 mm(e) Terminal diameter: 10 mm(f) Chemical used in the pipe: CCM (g) 200 to 252 micron copper coating |
| 66 | Supply and installation Earthing Strip 25 mm x 3mm including connection with brass nut, bolt, spring, washer. Excavation and re-filling etc. as required.Material: GI earthing strips made of mild steel, are hot dip galvanized and have a width tolerance of +/- 3 mm or +/- 5%. |
| 67 | Supply and installation Copper IGB (Internal Grounding Bus Bar) of size 300*100*3 mm. |
| 68 | Supply, installation, testing and commissioning of Wall Mount FansMake: Crompton/Havells/Usha |
| 69 | Supply, installation, testing and commissioning of recessed ceiling mount 36/40 W LED600 x 600 mm Ultra Slimmest Panel Light (Square) with integral driver for office purpose with cool day Colour Temperature (6000-6500 K).Make: Philips/Havells/Crompton |
| 70 | Supply, installation, testing and commissioning of Higher Efficient models of wall-mounted Hi Wall 2 Ton Inverter Split AC, five star rating of BEE Air Conditioners 2 Ton Machines confirming to latest Indian Standards and suitable for operation on 230 Volts ± 10 %, single phase, 50 Hz AC supply with rotary compressor, R 32 /R 410A (Eco-friendly Refrigerant) Refrigerant, copper evaporator, copper condenserand capable to perform cooling, dehumidifying, air circulating, auto mode, auto swing, anti-bacteria filtering, ventilation and with remote control with Cool/Fan/Dry/Auto Mode, Sleep Mode & ON/OFF timer, indoor temperature indicator with suitable thermostat. All connections of refrigerant piping shall be in high grade copper and copper pipes. Insulation of cold lines shall be carried out with 19mm thickness Nitrile Rubber Insulation Sheets and Tubes. Cold sticking compounds of Foster/IIDL or equivalent make shall be used for sticking insulation. The outdoor unit should be anti-rust powder coated. Indoor unit should have LED display. The rate should include installation charges also.Make: LG/Voltas/Panasonic/LLoyd/Daikin |
| 71 | Supply and installation of Single phase 160- 260v, 5kVA voltage stabilizer for 2 Ton AC |
| 72 | Supply and installation of Transient voltage surge suppressor (TVSS)TVSS is proposed for the critical and expensive electronic equipment protection from the transient over-voltages and shall be as per following specifications.(a) Surge Current Capacity: 100 kA(b) All Modes Protection: L-L, L-N, L-G, N-G(c) Connection Type: Parallel(d) Protection Level: < 1 kV(e) MCOV: Min. 320 Volts(f) Response Time :< 0.5 nanoseconds(g) EMI/RFI Attenuation: 40 dB typical(h) Status Indication: LED, Dry contacts(i) Monitoring: Monitoring of All Modes, including N-E(j) Fusing: Individual Fusing of MOV’s including N-G(k) Certification: UL 1449-3(l) Enclosure: NEMA Tested(m) Mounting: Wall Mounting(n) Warranty: 3 YearsThe main incoming switchboard (MSB) and distribution boards (DB) shall be equipped with TVSS. |
| 73 | Supply and install Timer Switch for AC with the following spec(a) Cyclic Timer Switch (b) Microcontroller based(c) On/Off LED Indication (d) Configurable switching time : 30 to 360 min(e) Suitable for 2 ACs of capacity: 30A/2TON |
| 74 | Supply and install Access Control System for doors(a) Access Control MachineReading mechanism: Fingerprint and Card Fingerprints & Card Capacity - More than 700 NosTransaction Storage : 80,000Push Data : YesFingerprint sensor : 500 DPI Optical SensorIdentification Speed : <= l secLED Indicator : Green/RedSchedule Bell/Speaker : Mini SpeakerCommunication : TCP/IPStandard Features : Inbuilt Battery BackupSelf Service Query, SSR Recorder, AutomaticPower Supply : 12V DC; 1.5 AmpsOperating Temperature : 0°C to 45°COperating Humidity : 20% -80%Relay : 12VSupport exit readers : Push ButtonTime & Attendance & Access Control(b) Drop bolt lock(c) Exit switch Push Button(d)4 core wire (length as needed)(e) I&C of access control system – 1 set |
| 75 | Supply and installation of CCTV System as detailed in the Technical specifications mentioned in RFP. |
| 76 | Supply and installation of approved portable Fire Extinguisher- ABC dry powder form charge with capacity 4Kg, meeting all standard specification in IS 15683:2006. Make: Minimax, Ceasefire or approved equivalent. |
| 77 | Supply and installation of Smoke Detector with fire alarm devicesType of Product- Optical Smoke DetectorAlarm Indication-2 continuous emitting red LEDsWeight:- less than 250g with baseAlarm current:- less than 200 mADiameter:- less than 150 mmHeight:- less than 60 mmReset Time:-Less than 1 sec.Smoke Sensitivity:-1.51% / ft ~ 2.73% / ft obscurationOperating Voltage:- DC (10.8 ~ 30) V |
| 78 | Supply and installation of Online Temperature Monitoring System (HRT Meter) Temperature Range : -5 to 75 degree celciusRealtime Status : Dashboard on local server / mobile appAlerts : Audio Alert & SMS/Email Alert |
| 79 | Supply and installation of Rodent Repellent System with following specOperating Frequency : 20 kHz to 60 kHz.Sound output : 80db to 110db at 1metre.Power output : 1W per transducer.Sweeps per Minute : 130(Configurable).Frequency Division : 100(Configurable).Power Consumption : less than 20 Watts Power Supply : 230V AC/ 50Hz 14 Volts DCWeight : less than 10 Kgs Approx.Mounting : Wall / Table Mounting |
| 80 | Supply of Single Mode Fiber Cable |
| 81 | Supply of Cat-6 UTP 4 Pair Cable |
| 82 | Supply of Cat-6 Keystone |
| 83 | Supply of Dual Face Plate (3x3) |
| 84 | Supply of 24-port fully loaded Straight Patch Panel, 1U |
| 85 | Supply of Cable manger Closed 1U |
| 86 | Supply of Cat-6 RJ45-RJ45 UTP Patch Cord 2mtr |
| 87 | Supply of 25mm Heavy Duty Casing & Capping |
| 88 | Supply of 40 mm Heavy Duty Casing & Capping |
| 89 | Laying of fiber optical cable including pipe and accessories |
| 90 | Laying of UTP Cable (including case & cap and accessories) |
| 91 | Keystone Termination & labeling with laser print Label (on Patch Panel) |
| 92 | Cable manger fixing and patch cord routing |
| 93 | 24 port Patch Panel Fixing & Labelling with laser print Label |
| 94 | Face Plate Fixing (Dual) including Information outlet Termination & Labelling with laser print Label |
| 95 | Fixing of Cat6 patch cord 2mtr Patch & Labelling inside the Rack for Switch /Router/Firewall/ISP connectivity. |
| 96 | Supply and installation of42U Rack as detailed in the Technical specifications mentioned in RFP. |
