|
| 1 | REMOVE & REFIT OF PORTABLE PERFORATED PLATES FROM CABLE LOCKER OF INS SHARDA TO BE UNDERTAKEN. |
| 2 | CHECKS CLIPS, HINGES FOR LOOSENESS AND WEDGE PIECES FOR SIGN OF WEAR. EXAMINE LEATHER WASHERS, TOROIDAL SEALING RINGS AND RUBBER SEALING. REPAIR ALL DEFECTIVE PARTS AFTER EXAMINATION. |
| 3 | FOUNDATION, SECURING SHOE AND STRUCTURE OF 100 INNO GUARD RAIL STANCHIONS PROVIDED ON FOXLE, BOAT DECK, GUN DECK, AND QUARTER DECK CORRODED/ DAMAGED. TO BE RENEWED. MAT -MS QTY-100 NOS, |
| 4 | FIX GUARD RAILS AT POOF DECK CORRODED/ THINNED. TO BE RENEWED. APPROX - 15 MTR |
| 5 | COMPLETE OVERHAULING OF 10 IN WT HATCHES TO BE CARRIED OUT. SPARES TO BE PROVIDED BY VENDOR |
| 6 | COMPLETE OVERHAULING OF 11 IN WT DOORS TO BE CARRIED OUT. SPARES TO BE PROVIDED BY VENDOR. |
| 7 | 100 IN NO. BONDING STRAPS AT VARIOUS LOCATIONS IN UPPER DECK PERISHED TO BE RENEWED IN SITU. QTY-100 NOS. BONDING STRAPS WILL BE PROVIDED BY VENDOR. |
| 8 | DOOR RETAINING HOOKS OF WT DOOR FITTED AT VARIOUS LOCATIONS DETERIORATED/ PERISHED TO BE RENEWED IN SITU.MAT-MSQTY-10 NOS |
| 9 | CONNING BOX CORRODED AND BROKEN. TO BE REPAIRED/ RENEWED AND WELDED IN SITU. QTY - 10 NOS. MAT- MS; SIZE: 450 X 200 MM |
| 10 | COAMING OF WT DOORS CORRODED AND THINNED. TO BE RENEWED. MAT -MS, QTY - 04 NOS |
| 11 | Platform guard rails inboth engine rooms broken / damaged. Renewal and fitment of guard rails to be undertaken. |
| 12 | Spare box storing racks of SPTA compartment deteriorated, to be renewed. Job involve cutting of old racks, manufacturing of new rack and fitment in place using cutting/welding. Qty-20, dimensions-01 Mtr*01 Mtr each. |
| 13 | Bilge plates in Fwd, Aft and aux engine room damaged same to be manufactured and replaced:- ( mat.-MS.).500 Sq .MTR |
| 14 | Bilge plate securing frames at various location in FER, AER and AUX E/R broken / damaged. the following assistance required :- (a) Cutting old frames and welding new frames.(b) Drilling holes in new frames as per plates holes.(c) Making securing arrangements (along with rubber combing) for the plates on the frames.(approximate length 300 Mtrs; Mat - MS L Bar (RUBBER BEADING 3\" WIDTH & Length-200 MTR) |
| 15 | Tool locker in Aux E/R, FER and AER to be manufacture as per drawing. Dimensions - L- 1.5 Mtr, H - 0.75 Mtr & W - 0.50Mtr |
| 16 | REMOVE & REFIT OF LAGGING (MFMB) MATERIAL IN ORDER TO CARRY OUT HOT WORKS, THICKNESS OF LAGGING: 25 MM & 50 MM. NEW LAGGING/ INSULATION MATERIAL WILL BE PROVIDED BY VENDOR. PAYMENT ON ACTUALS |
| 17 | REMOVE & REFIT OF PIPES OF VARIOUS SIZES: 15NB, 20NB, 25NB, 32NB, 40NB, 50NB, 65NB, 80NB and 100NB FOR NECESSIATING THE HOT WORKS |
| 18 | REMOVE & REFIT OF MACHINERY, ELECTRICAL & VARIOUS ACCOMMODATION ITEMS (BUNKS/ CUPBOARDS/ RACKS, ETC.) FOR NECESSIATING THE HOT WORKS |
| 19 | REMOVE & REFIT OF ELECTRICAL CABLE DUCT & VENTILATION TRUNKING OF APPROXIMATE LENGTH OF 10 M EACH |
