|
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 3 | Sub-Head : Finishing |
| 4 | 12 mm cement plaster of mix : |
| 5 | 1:6 (1 cement: 6 fine sand) |
| 6 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 7 | 1:6 (1 cement: 6 fine sand) |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 9 | Two or more coats on new work. |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 11 | Old work (one or more coats) |
| 12 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 13 | Two coats. |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 15 | One or more coats on old work. |
| 16 | French spirit polishing : |
| 17 | One or more coats on old work. |
| 18 | Sub-Head : Repairs to Buildings |
| 19 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 20 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 21 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 22 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 23 | Sub-Head : Sanitary Installations |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 25 | W.C. pan with ISI marked white solid plastic seat and lid |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 27 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 28 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 29 | 10 litre capacity - White |
| 30 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 31 | (a) 15 mm nominal dia |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 33 | Flexible pipe |
| 34 | 32 mm dia |
| 35 | 40 mm dia |
| 36 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 37 | Sub-Head : Water Supply |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 39 | 15 mm nominal outer dia. Pipes. |
| 40 | 20 mm nominal outer dia. Pipes. |
| 41 | 25 mm nominal outer dia .Pipes. |
| 42 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 43 | 32 mm nominal bore. |
| 44 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 45 | 45 cm length |
| 46 | 15 mm nominal bore |
| 47 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 48 | 150 mm diameter |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 50 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 51 | 15 mm nominal bore. |
| 52 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 53 | 15 mm nominal bore |
| 54 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 55 | 15mm nominal bore |
| 56 | Sub-Head :Misc. |
| 57 | Rubbing and polishing existing Moisac flooring using appropriate size of machine and stone , to give smooth and clean surface complete as per direction of Engineer in charge . |
