Supply, Installation, Testing & Commissioning of Cricket Stadium Lights Tower Rabupura, YEA - Supply, Installation, Testing & Commissioning of BVP485 LED Flood light luminaires 464 watt & minimum system lumens 60,000. conforming to sports standards non televised on 30m high mast with frame with 5-year extended warranty complete as required Supply of high wattage LED flood light for sports lighting application having system wattage as 465W (±5W) made of Single piece Aluminum pressure die cast (ADC12 Alloy) housing to ensure products endurability in harsh nvironment and heat dissipation in operation. The rear cover shall also be made of ADC12 Alloy. The housing shall be recyclable, non-corrosive & shall have copper content Cu<10%. The luminaire should successfully pass Standard MSP 500hrs salt spray test. The luminaire housing shall have powder coating along with Integrated Potted Driver and LED lamp cavity. Luminaire, it’s driver & SPD should be of same make as that of Luminaire for proper smooth integration of all the key electronic components. The luminaire shall have front cover made of Integrated Peanut Lens Optics Anti Dust Exposed Lens. Luminaire shall comply to IK08 rating. The luminaire shall have Pre-set gasket without glue and must have robust glands to protect luminaire against dust and water/moisture, improving product lifetime. The luminaire housing shall be IP66 rated. 2 The luminaire shall be so designed that it complies to Class B Serviceability Classification & shall have Electrical Insulation Class as Class – 1. The luminaire shall employ all the LED compartments within in one single piece housing & the product should not be an amalgamation of multiple luminaires joined together mechanically. The luminaire shall be so designed that the wind loading area shall not be more than 0.40sq.mt. The luminaire shall be so designed that the fins in housing catalyze heat dissipation and with total luminaire nominal weight of 12KGs (±2KG). The luminaire shall have slim rear cover and housing with chamfer for ease of handling the luminaire. The luminaire life shall be 50000Hrs @ L70 @ 35°C ambient. The luminaire shall deliver minimum system lumen output of min 60350lumens with minimum system efficacy of 130lm/w.The luminaire shall have LEDs with CCT 5700°K, CRI≥70, SDCM≤5. LEDs shall be SMD type & shall be from Lumileds/Osram/Cree/ Nichia & the LED luminaire manufacturer shall submit the LM80 report issued by LED manufacturer, LED must be tested for min of 13000hrs . The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip, array multi die, mid power, Integrated arrays and COB’s are not permitted. 3 The luminaire shall be available with minimum two beam angles Narrow beam (10°±2%), SMB (57.5°± 5%), SWB & AWB. The luminaire shall be suitable for operating temperature of -40°C to 50°C. The luminaire shall employ BIS registered LED drivers having efficiency of ≥90%, THD≤10% @ full load, pf≥0.95 & operating voltage range of 120V-270V. The driver shall have following protections 4 : a) Can Survive input Voltage Stress of 320V for 48 hours, b) Cut Off Auto Shutdown at ≥ 325V and Auto Recovery at 300 - 315V, c) Can Survive input Voltage Stress of 440V for 8 hours, d) Can Survive input Voltage Stress of 100V for 48 hours & e) inbuilt surge protection of 4KV In-built in the driver. The luminaire shall employ external SPD of 10KV housed inside a box. The luminaire driver &it’s SPD shall be of the same make/manufacturer/Lighting company as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, electrical & electronics tests , Type test as per IS10322, FAT before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. The LED Luminaire & its driver both should be BIS registered. Successful bidder shall submit the following reports along with technical bids: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, IK Test report for luminaire as issued by NABL accredited lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver. Equivalent in Signify (Philips). . LED Flood Light 60000lumens as per the directions of the Engineer-in-charge Analysis of Rates 5 30Mtr height suitable for Sports application Supply, Installation, testing & commissioning of 30m Hot dip galvanized, polygonal high masts with fixed head frame/cross arms suitable for mounting up to 28 nos. of minimum 465w LED lighting fixtures complete with all accessories as per specification and to obtain an average vertical/horizontal illumination. The height of the mast from base up to top of head frame shall be around 30mtrs. Polygonal high mast tower with fixed head frame along with provision for using man rider with each mast for accessing the head frame platform. Structural design of the high mast should be carried out as per the technical report no.7/ relevent standard and regulation. The mast should be designed considering base gust wind speed 33 km/Sec as per IS 875 and thickness of GI coating should withstand as per wind speed 33Km/sec. Price shall include suitable 1.2m Lightning Arrestor as per requirement. as per the directions of the Engineer-in-charge Make:-Bajaj, Crompton , PhilipsAnalysis of Rates 6 Design and construction of Foundation Design and construction of Casting of suitable Raft type foundation for the High Mast as per the directions of the Engineer-in-charge Analysis of Rates 7 External Man Rider Supply, Installation, Testing & Commissioning of external man rider unit as per the directions of the Engineer-in-charge Analysis of Rates 8 Aviation Light Supply, Installation, Testing & Commissioning of Medium intensity LED type Aviation obstruction luminaire to be mounted on High Mast complete with accessories as per the directions of the Engineer-in-charge Analysis of Rates 9 High Mast Lighting Panel Supplying, installation, testing and commissioning of cubicle type IP 55 outdoor High mast Lighting Feeder Pillar suitable for 415 volt, 3 phase, 4 wire 50 HZ AC supply system, fabricated in compartmentalized design from CRCA steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates, including cleaning and finishing complete with 7 tank process having extensible type TPN aluminum alloy bus bar of high conductivity, with base frame of M.S. section of suitable size, copper earth bar of size 25mmx 5mm at the rear with 2 nos earth stud, complete with control wire, cable alleys, cable gland plates, including following items mentioned below. The feeder pillar should be suitable for pedestrail mounting above 500mm from the ground floor with necessary base frame/ civil works for suitable foundation.as per the directions of the Engineer-in-charge Analysis of Rates 10 Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI (Mumbai/Nasik), Fort Gloster (Kolkata), Asian (Thane/Silvasa), Universal (Satna), Nicco (Kolkata/Baripara), ICL (Rajpura), Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) complete in all respect as per the directions of the Engineer-in-chargePWD-2018/PS No-501 3.5C X 95Sq.mm. 11 Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI (Mumbai/Nasik), Fort Gloster (Kolkata), Asian (Thane/Silvasa), Universal (Satna), Nicco (Kolkata/Baripara), ICL (Rajpura), Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) complete in all respect as per the directions of the Engineer-in-chargePWD-2018/PS No-501 3.5C X 150Sq.mm. 12 Supply and laying of following sizes 1.1 KV FRLS XLPE insulated cable with copper conductor, PVC inner sheathed, unarmoured, overall PVC sheathed stranded and twisted cable in conformity to the technical specification and as per latest IS - codes. 7C X 2.5Sq.mm. as per the directions of the Engineer-in-charge. Analysis of Rates 13 Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. PWD-2018/PS No-504 95Sqmm. 14 Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. PWD-2018/PS No-504 150Sqmm. 15 S/F of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 Mtr. below ground level complete with 20 mm dia G.I. pipe & funnel for watering & one earthing lead of one no. 8 to SWG GI wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of GI pipe and GI wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. complete in all respect as per the directions of the Engineer-in-charge. PWD-2018/PS No-702 16 Supply and laying of 25mmx3mm G.I. strip from earth electrode directly in the ground as required complete in all respect as per the directions of the Engineer-in-charge PWD-2018/PS No-710 17 Main Power control panel Floor mounted type with 400amp four pole main incomer complete with indication, metering, protection as per the directions of the Engineer-in-charge Analysis of Rates 18 S/L of 120mm dia. DWC pipe for drawing of power cable across the road by drilling of 150mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-13
