|
| 1 | Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide and not exc. 1.5m in depth for taking out / laying ofunder ground cable in trenches or cable ducts, complete all as specified and as directed. |
| 2 | Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide, exceeding 1.5 m depth and not exc. 3.0 m in depth for taking out / laying ofunder ground cable in trenches or cable ducts , complete all as specified and as directed. |
| 3 | Returning, filling in including spreading, levelling, watering andwell ramming in layers, not exceeding 25 cm thick in soil after repairing / jointing and laying and testing of cables, complete all as specified and as directed. |
| 4 | Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point , complete all as specified and as directed. |
| 5 | M&L natural river sand as cushioning of cables including spreading and punning down all as per clause No 19.75 of SSR part -I, complete all as specified and as directed.Note : punned thickness shall be measured for payment purpose |
| 6 | Supply and laybrick of conventional size 230x110x75mmlocallly available as protection of cable in trenches, complete all as specified and as directed. |
| 7 | Labour charges for re-laying of serviceable bricks of any size and type recovered during taking out of old cable , over newly laid or re-laid cables, complete all as specified and as directed. |
| 8 | M&L for cutting existing road / PCC drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with PCC 1:3:6 type CI using 20mm graded aggregate, complete all as specified and as directed. |
| 9 | M&L for 50mm dia GI pipe (light grade) galvanised for cable protection and sealing both ends including taking out old pipe, complete all as specified and as directed. |
| 10 | M&L for 80mm dia GI pipe (light grade) galvanised for cable protection and sealing both ends including taking out old pipe , complete all as specified and as directed. |
| 11 | M&L for 100mm dia GI pipe (light grade) galvanised for cable protection and sealing both ends including taking out old pipe , complete all as specified and as directed. |
| 12 | Taking down or out existing cable of sizes 2/3.5/4 core 16 sqmm to 240 sqmmfrom the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub stationincluding segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal, complete all as specified and as directed.Note :(1) Excavation / cutting of road or floor/ GI pipe & laying / relaying of cableetc shall be measured and paid seperately under respective item of this schedule |
| 13 | Relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 2/3.5/4 core 16 to 70 sqmm in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc, complete all as specified and as directed. Note ;- Lugs and Glands will be measured and paid separately. |
| 14 | Description all as per Item Sl No 13 above but of size 3.5 core 95 to 240sqmm, complete all as specified and as directed. |
| 15 | Supply & Laying in replacement XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16sqmm 4 core including necessary cable lugs, glands, insulation tape and deposited to MES store yard, complete all as specified and as directed. |
| 16 | Description all as per ser item Sl No 15 above but of size16 sqmm 2 core , complete all as specified and as directed. |
| 17 | Description all as per ser item Sl No 15 above but of size25 sqmm 4 core, complete all as specified and as directed. |
| 18 | Description all as per ser item Sl No 15 above but of size35 sqmm 3.5 core , complete all as specified and as directed. |
| 19 | Description all as per ser item Sl No 15 above but of size 50 sqmm 3.5 core, complete all as specified and as directed. |
| 20 | Description all as per ser item Sl No 15 above but of size 70 sqmm 3.5 core, complete all as specified and as directed. |
| 21 | Description all as per ser item Sl No 15 above but of size 95 sqmm 3.5 core, complete all as specified and as directed. |
| 22 | Description all as per ser item Sl No 15 above but of size 120 sqmm 3.5 core , complete all as specified and as directed. |
| 23 | Description all as per ser item Sl No 15 above but of size 185 sqmm 3.5 core, complete all as specified and as directed. |
| 24 | Description all as per ser item Sl No 15 above but of size 240 sqmm 3.5 core, complete all as specified and as directed. |
| 25 | M&L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 16sqmm x 4 core cables including testing and commissioining , complete all as specified and as directed. |
| 26 | Description all as per ser item Sl No 25 above but of size 25 to 50sqmm x 3.5 / 4core, as per the size of existing UG cable, complete all as specified and as directed. |
| 27 | Description all as per ser item Sl No 25 above but of size 70 to 120 sqmm x 3.5core, as per the size of existing UG cable, complete all as specified and as directed. |
| 28 | M&L LT indoor/outdoor end joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 150/185 sqmm x 3.5 core cables including testing and commissioining , complete all as specified and as directed. |
| 29 | M&L LT indoor/outdoor end joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 240-300 sqmm x 3.5 core cables including testing and commissioining, complete all as specified and as directed. |
| 30 | Supply & fixing in replacement of 250A 4 pole MCCB, 36 KA,415V, 50 Hz, AC supply adjustable type of thermal and megnatic setting including necessary cable lugs & wire etc complete all as specifeid and directed. |
| 31 | Supply & fixing in replacement of 250 A 3 pole MCCB, 36 KA ,415V, 50 Hz, AC supply adjustable type of thermal and megnatic setting including necessary cable lugs & wire etc complete all as specified and directed. |
| 32 | Supply & fixing in replacement of 200A 3 pole MCCB, 36 KA,415V, 50 Hz, AC supply adjustable type of thermal setting including necessary cable lugs & wire etc complete all as specified and directed |
| 33 | Supply & fixing in replacement of 100 A 3 pole MCCB, 16KA ,415V, 50 Hz, AC supply including necessary cable lugs & wire etc complete all complete as specified and directed. |
| 34 | Supply & fixing in replacement of 63 A TP MCCB, 16 KA,415V, 50 Hz, AC supply including necessary cable lugs & wire etc, complete all as specified and as directed. |
| 35 | Supply & fixing in replacement of digital type Ammeter 96X96 mm square Flush mounted case of class 1.0, complete all as specified and as directed. |
| 36 | Supply & fixing in replacement of digital type Voltmeter 0-500V, 96X96 mm square Flush mounted case of class 1.0 , complete all as specified and as directed. |
| 37 | Supply & fixing in replacement of CT 400 - / 5A, 200/5A or 100/5A for ammeter , complete all as specified and as directed. MAKE : AE / IMP/ MECO / MEI / HPL |
| 38 | M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground(earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised earth strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanisediron or steel all as shown in electrical plate No 3, connected to earthing point of outdoor panel boards all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel,complete all as specified and testing on completion. |
| 39 | Supply and fixing in replacement of decorative garden light (landscape lighting) made up of high grade unbreakable polycarbonate materials of capacity 9W LED complete all as specified and directed. Make : Bajaj Cat Part No BGBOM 650 9W LED (Tulip) or equivalent/Havells/CROMPTON. Note (i) Contractor shallprovide 2 years written manufacturer\"s warranty for the LED fixture complete including driver from the certified date of completion. (ii) The contractor should include the rates for PCC as required and nut bolts for fixing the light in the quotated rate. |
| 40 | Taking out old unserviceable steel tubular/RCC poles 9 mtr long and supply and erection of steel tublar swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and shifting of conductors and insulators etc incl painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle, complete all as specified and as directed. |
| 41 | M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from groundlevel will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia , complete all as specified and as directed. |
| 42 | Supply and installation of off load change over switch in sheet metal enclosure of capacity 4P 63 Amps, complete all as specified and directed. |
| 43 | Supply and installation of on load change over switch in sheet metal enclosure of capacity 4P 100 Amps, complete all as specified and directed.Make : Indoasian or equivallent in CG/ Havells |
| 44 | Supply and installation of on load change over switch in sheet metal enclosure of capacity 4P 200 Amps, complete all as specified and directed. |
| 45 | S & F in replacement of Integral LED street light of capacity 60 watt luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 6000 lumen output mounted on MCPCBin gress protection IP-66 complete all as specified and as directed. |
| 46 | S & F in replacement of Integral LED street light of capacity 90 watt luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 9000 lumen output mounted on MCPCBin gress protection IP-66 complete all as specified and as directed. |
| 47 | Supply and fixing in replacement of LED driver suitable for upto 6000 lumen lumanaries complete all as speified and directed. |
| 48 | Supply and fixing in replacement of LED driver suitable for upto 9000 lumen lumanaries complete all as speified and directed. |
| 49 | S&F in replacement of 1.5 sqmm 3 core PVC insulated flexible copper conductor wire from street light terminal box to fittings of required length drawn through and including PVC conduit of suitable size or as indicated, complete all as specified and as directed. |
| 50 | Supply and fix cable junction boxes in replacement of IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 250 x 250 x 160 mm incl 01 No MCB SP 6 amp and having backelite connecting terminals mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness and connecting the incoming & out going LT cable connections in the terminal block of junction box and fixing clamps made up of GI flat of size 20 x 3 mm of suitable length-02 Sets, incl GI nut and bolt and washers on poles, complete all as specified and as directed. |
| 51 | M&L and fixing in replacement of string aluminium conductor, steel reinforced drawn for over head lines in poles including jumpers and binding to insulators for 3 of /6/1x2.59mm weasel,completeall as specified and directed. |
| 52 | Dismantling old unsv conventional earth pit including electrode plate/pipe from position and M&L for maintenace free chemical earthing with bentonite based earth fill mtrl in same or different place where directed with copper earth electrode of suitable size including back fill compound and other accessories as required and recommended by OEM and connecting with copper strip of size 25x3 mm in position (connecting upto 7.5 mtr length max) complete all as specified and as directed. |
| 53 | S & F in replacement of Integral LED street light of capacity 35W luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 3500 lumen output mounted on MCPCBin gress protection IP-66 complete all as specified and as directed. |
| 54 | S & F in replacement of Integral LED street light of capacity 45W luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 4500 lumen output mounted on MCPCBin gress protection IP-66 complete all as specified and as directed. |
| 55 | S & F in replacement of 150W LED flood light of die cast aluminium body, IP-66 including all accessories as required complete all as specified and as directed. (Make :Havells cat part No JETAIRISFLS150WLED757PSYMLTG or Crompton Greaves cat part No LFLN-150-CDL/60M or Phlips equivalent) |
| 56 | S & F in replacement of 240/250W LED flood light of die cast aluminium body, IP-66 including all accessories as required complete all as specified and as directed. (Make : Havells cat part No JETAVALOURFL240WLED757MODWBLTG or Crompton Greaves cat part No LSFO-250-CDL/60M or Phlips equivalent) |
| 57 | Supply and fixing in replacement of LED driver suitable for upto 3500/ 4500 lumen lumanaries complete all as speified and directed. |
| 58 | Supply and fix cable junction boxes in repairs of IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 350 x 250 x 160 mm incl 01 No MCB SP 6 amp new backelite connecting terminals mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness and connecting the incoming & out going LT cable connections in the terminal block of junction box and fixing clamps made up of GI flat of size 25 x 6 mm of suitable length-02 Sets, incl GI nut and bolt and washers on poles, complete all as specified and as directed. |
| 59 | Taking down and replacement ofexisting unserviceable street light fitting bracket with new brackets made out of 40mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 50 x 6 mm with bolts, nuts and washers, complete, all as specified and directed. |
| 60 | Taking down and replacement ofexisting unserviceable clamps with new clamps made out of 40x6 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer,complete, all as specified and directed. |
| 61 | S&F in replacment MCB SP 5/6 amp, \"C\" curve, 10 KA, 240V complete inside existing postion of street light terminal boxes including taking down old unserviceable all as specified and as directed. |
| 62 | S&F in replacement of rigid non-metallic PVC conduit of 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc including taking down old unserviceable all as specified and as directed. |
| 63 | Notes :- An amount of ` 1,72,557.00 on account of Credit Schedule for Schedule \"A\" Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum |
