}

Tender For Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model, Water For Injection (Wfi) Generation, Storage And Distribution System, At M/S. Homco Kerala Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model, kalavoor-Kerala

Kerala State Homoeopathic Co-Operative Pharmacy Limited has published Tender For Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model, Water For Injection (Wfi) Generation, Storage And Distribution System, At M/S. Homco Kerala Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model. Submission Date for this Tender is 16-12-2024. Water Treatment Plant Tenders in kalavoor Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

46366965
Tender For Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model, Water For Injection (Wfi) Generation, Storage And Distribution System, At M/S. Homco Kerala Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model
Open Tender
Indian
Kerala
Kalavoor
16-12-2024

Tender Details

Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model, Water For Injection (Wfi) Generation, Storage And Distribution System, At M/S. Homco Kerala Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model, Water For Injection Generation, Storage And Distribution System, At M/S. Homco , Supply, Installation, Commissioning & Validation Of Cgmp Model, Water For Injection (Wfi) Generation, Storage And Distribution System, At M/S. Homco –Kerala , Multicolumn Distillation Plant - 150 Lph Output Mcdp Column -4 Nos Mcdp Preheater Feed Water Cooler Condenser Cooling Water Cooler Condenser Insulation,Sight Glass/View Glass Plc Based Control Panel For Online Process Instruments Sensors, Pumps, Flow Diversion Valves With Appropriate Synchronized In Ss304 Enclosure Panel. On Site Installation, Commisioning And Documentation - Dq Iq Oq With Training And Other Charges Size: 150 Lph Output , Wfi Water Storage Tank & Accessories - 300 Ltrs. Capacity : 300 Litres Working, M.O.C Of All Contact Parts : Ss 316L,M.O.C Of All Non-Contact Parts : Ss 304,Type Of Tank :Vertical ,Cylindrical Jacketed Tank With Insulated And Cladded ,Thickness: (3 Mm For Shell, Bottom Dish & Top Dish), (Jacket Shell & Bottom Dish- 4 Mm),Cladding: Shell: 2 Mm Bottom Dish: 3 Mm,Designcreteria: Asme Section Viii :Div- I, Insulation: 50Mm,Tank Internal Electro Polished With Surface Finish<0.8Ra, Operating Temperature: Normally 80-85 ° C And During Sterilisation121-150 ° C, Surface Finished: Ra < 0.5 Micrometer., Level Transmitter , Type: Capacitance Type , Capacity - 0-300 , End Connection : Tc Ended, 1.5, Compound Pressure Gauge ,Type: Sanitary Type, Diaphragm Sealed Glycerine Filled, Range: 0 To 7 Bar , Dial Size: 4, Vent Filter With Acessories , Type: Electrically Heatedinsulated & Cladded , Size:4X10 , Acessories: Temperature Sensor, Diaphragm Valve For Drain, Vent Catridge , Type: Hydrophobic , Size:10 , End Connection : Code-7,Auto Diaphragm Valve,Type: Weir Type Auto Diaphragm Valve,Diaphragm: Epdm Backed Ptfe,Size: Equal Inlet Outlet, Two Way Manual Diaphragm Valve,Diaphragm: Epdm Backed Ptfe,Type: Weir Type Manual Diaphragm Valve, Spray Ballwith Assembly ,Type: Rotary,360 Degree ,Size:3/4,Operating Pressure:Min 1 Bar,End Connection : Screwed/ Pin,Tank Out Let Pipe & Fittings,Standered : Asme Bpe Dimensions As Per Astm A 270,Ra:<.5?M Internal,Size: 40Mm,Location: Tank Suction Sampling Valve ,Diaphragm: Epdm Backed Ptfe ,Type: Weir Type Manual Diaphragm Valve,Size: Equal Inlet Outlet,Temperature Sensor Cum Transmitter,Model : Pt100, 3 Wire Type,Size:1/2 Bsp,Length:Approx 150Mm,Location: Tank Jacket Piercing To Tank Shell Through Thermovell, Accessories : Tc Clamps & Gasket, Actuated Angle Seat Valve : ¾” Ss 304 , On/Off Non Ibr Type, Single Acting Tc End At Inlet Of Jacket,Actuated Angle Seat Valve : ¾” Ss 304 , On/Off Non Ibr Type, Single Acting Tc End At Inlet Of Jacket,Ball Valve For Steam Inlet : ¾” Ss 304 ,3-Piece Full Port Tc End For Steam Inlet , Ball Valve For Condensate Line & Air Jacket Vent : 15 Nb Ss 304 3-Piece Full Port ,Tc Endup To 10 Bar, Pressure Safety Valve With Blow Down Piping : ½” Brass/Ms Powder Coated, Spring Loaded Nonibr, Screwed End At Steam Inlet,Steam Trap : 15 Nb Cs, Thermodynamic Tc End At Jacket Drain Pressure Up To 10 Bar ,Pressure Indicator With Syphon : 1/2” Bsptdia 4” At Jacket Ss 304 ,Bourdon Type, Range 0 To 10 Bar , Pipes & Pipe Fittings For Wfi Water Loop System , Pipe Moc :Ss316l Type: Erw Finish: Internal Electro Polish ( Ra<.5?M), External Matt Finish Standard : Astm A 270 Size: 3/4”Od , Elbow Moc :Ss316l,Type: Erw, Finish: Internal Electro Polish ( Ra<.4?M), External Matt Finish Standard : Astm A 270, Radius: 1.5D Size: 3/4”Od , Tc Ferrule Moc :Ss316l, Type : Rod Machined Finish: Internal Electro Polish ( Ra<.4?M), External Matt Finish Standard : Astm A 270 Size: 3/4”Od , Tc Clamp Moc :Ss304, Standard : Astm A 270 Size: 3/4”Od , Tc Gasket Moc :Silicon, Standard Compliance : Fda Complied Size: 3/4”Od , Ph Clamp Moc :Ss304 Size: 3/4”Od , Stud Moc :Ss304 Size: 1/2”X50mm , Standard Support Moc :Ss304 Size: 1/2”X100mmx80mm Dia Round Plate With Stud , Anchor Bolt/ Panel Bolt Moc :Ss304 Size: M10x75mm , Anchor Bolt Moc :Ms Size: M10x75mm , Square Plate Moc :Ms. Size: 100X100x6mm , Ms Angle Size: 40X40x6mm , Ht Class Nitrile Rubber Insulation- Size- 3/4 , Pipe In And Pipe Out Insulation At User Point Size-3/4X2.5” , Zero Dead Leg Valve For Pou Moc: Astm A351 Cf3m (Ss316l) Diaphragm: (Epdm Backed By Ptfe) Make : Mascon/Avcon/ Leistung Type: Weir Type Size:Equal Inlet Outlet Handle:Abs Plastic End Connection : Tc Location: User Point Temperature:Normal Operation 85 Degree Upto 150 Degreecelcius Size- 3/4”Od , Actuated Zero Deadleg Valve For Userpoint Moc: Astm A351 Cf3m (Ss316l) Diaphragm: (Epdm Backed By Ptfe) Make : Mascon/Avcon/ Leistung Type: Weir Type Size:Equal Inlet Outlet Handle:Abs Plastic End Connection : Tc Location: User Point Temperature:Normal Operation 85 Degree Upto 150 Degreecelcius Size-3/4”Od , Process & Instrumentation Skid For Wfi Water Recirculation System , Ss 316L Centrifugal Mono Block Type Sanitary Pump Tc End Size: 1.1 M3/Hr @ 7.5 Bar , Pump Discharge Valve , Ss 316 L Base ,Tc End At Pump Discharge With Ptfe Backed Epdm Rubber Diaphragm Size- 20 Nb , Ss 316L Return Line Isolation Valve , Tc End , Manual Diaphragm Valve Size-20 Nb , Ss 316L Pure Steam Inlet & Mcdp Inlet On The Tank, Tc End, Pneumatic Actuated Diaphragm Valve Size-20 Nb , Ss 316L Valve For Condensate Removal Tc End,, At Suction And Return Line Size- 15Nb , Ss 316 L Clean Steam Trap For Condensate Removal, Size- 15 Nb , Ss316l Pressure Gauge For Supply And Return Line, 0 To 10 Bar, Tc End At Distribution Pump Discharge Size- 1.5”Tc , Ss 316L Sampling Valve , Tc End At Supply And Return Line Size- 8Mm , Ss 316L Conductivity Sensors & Transmitter In The Return Line , Compensated Type,Range 0 To 10 Us/Cmtc End Size- 40 Nb , Ss 316 L Temperature Sensors And Transmitter In The Return Line0 To 150 Deg C 50 Mm Probe Length Tc End Size- 50 Mm , Ss 316L Vortex Flow Meter 0-1500 Lph Transmitter Tc End Size- Dn 20 , Ss 316L Three Way Flow Diverted Valve Tc End 0 To 10 Bar Size - Dn 20 , Ss 316L Pressure Transmitter Tc End 0 To 10 Bar Size- Dn 20 , Ss 316 L Sanitary Pressure Safety Valve ,Tc End 0 To 10 Bar Size- Dn 20 , Toc Analyser Size-Dn15 , Pipes, Fittings,Union,Bends,Tees,Skid Inter-Connecting , Plc Based Control Panelfor Online Process Instruments Sensors, Vfd For Pumps, Flow Divertion Valves With Appropriate Synchronised In Ss304 Enclosure Panel With Printer Dot-Matrix 40 Column Epson Make , Installation And Commisining Of The Piping And Distribution System Size-Std , Closed Head Orbital Welding Joints / Internal Borescope Of The Orbital Weld Joint(10%) Size- Std , Insulation Laying Price , Hydro Testing & Passivation Size- Std

Key Value

Document Fees
INR 17700 /-
EMD
INR 75308.0 /-
Tender Value
INR 75.30 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail