Tender For Improvement Of Sc/St Basites.Sub Work:- Providing And Fixing Outdoor Exercise Fitness Equipment (Open Gym) At Raigar Pura Park & Dev Nagarin Karol Bagh Assembly Constituency-23., Delhi-Delhi

Tender For Improvement Of Sc/St Basites.Sub Work:- Providing And Fixing Outdoor Exercise Fitness Equipment (Open Gym) At Raigar Pura Park & Dev Nagarin Karol Bagh Assembly Constituency-23.-1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 15m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). 4 Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). 6 Providing Fixing and Installation of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make Double Tai Chi Teflon Resistance Trainer. The unit must consist of 4 wave shaped fan blades made of high grade poly-ethylene, with rotate free grips & without any holes or gaps to prevent entrapment. The blades are attached to an ergonomically curved, monolithic large arc tube center pillar without convex sides & minimal deformation to provide a pleasing, mordern aesthetic look. The wall thickness of the main curved center pillar is minimum 3 mm & has a 8mm thick, 40cm gusset support. The blades are connected to high grade Teflon resistance maintainance free bearings. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powderelectrostatic coating. All complete fixing of equipment in foundation is to doneas per the direction of engineer in charge or as per approved drawing & design given by manufacturerincluding earth work, c:c workup to plinth level in 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)of required size as per department / manufacturers specifications and guidelines.Engineer In-Charge 7 Providing Fixing and Installation of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make Double Shoulder Press Station that must contain of two A.R.M MODULES ( Angular resistance, bearingless module) that works as dual action [push and pull / extension & contraction] connected to a main center pillar of OD 89mm of min 3mm thickness. The A.R.M must be bearingless, shock less, drop less and provide 0-30 kg resistance. The seats are fixed to the main post and do not move up and down - [Seats are immovable] to ensure it is safe & stable, zero drops and support disabled people to use the product without risk of falling or slipping off. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powder electrostatic coating. The handles are of 3mm Endu-Rubber with aluminum cap locking anti vandal system. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. All complete fixing of equipment in foundation is to doneas per the direction of engineer in charge or as per approved drawing & design given by manufacturerincluding earth work, c:c workup to plinth level in 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)of required size as per department / manufacturers specifications and guidelines.Engineer In-Charge 8 Providing Fixing and Installation of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make Double Chest Press station that must contain two A.R.M MODULES ( Angular resistance, bearing less module ) that works as dual action [push and pull / extension & contraction] connected to a main center pillar od OD 89mm of min 3mm thickness. The A.R.M must be bearing less, shock less, drop less and provide 0-30 kg resistance. The seats are fixed to the main post and do not move up and down - [Seats are immovable] to ensure it is safe & stable, zero drops and support disable people to use the product without risk of falling or slipping off. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powder electrostatic coating, The handles are of 3mm Endu-Rubber with aluminum cap locking anti vandal system. All complete fixing of equipment in foundation is to doneas per the direction of engineer in charge or as per approved drawing & design given by manufacturerincluding earth work, c:c workup to plinth level in 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)of required size as per department / manufacturers specifications and guidelines.Engineer In-Charge 9 Providing Fixing and Installation of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make a three person body twister station that consists of three swivel stands that rotates but with a built in safety limitor that meets international safety standards as the arms and shoulders of the user are held square in the overhead hold that is fixed to a monolithic large arc tube center pillar without convex sides & minimal deformation ergonomically curved. The Center pillar has an OD of 89 mm, the wall thickness is min 3 mm & has a 8mm thick, 40cm gusset support at standard height of 1.4m. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps. Finishing to be Metalized / Plasma zinc injection + Dupont/Alexta outdoor use color powder electrostatic coating. All complete fixing of equipment in foundation is to doneas per the direction of engineer in charge or as per approved drawing & design given by manufacturerincluding earth work, c:c workup to plinth level in 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)of required size as per department / manufacturers specifications and guidelines.Engineer In-Charge 10 Providing Fixing and Installation of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make a Foot Cycle that has a central pin which connects the 2 heavy flywheels & which has 2 main bearings and in addition has a TEFLON RESISTANCE BEARING which locks the pin and creates resistance to the spin. The central pillar is a monolithic large arc tube without convex sides & minimal deformation which is ergonomically curved with an OD of 89 mm, the wall thickness is min 3 mm & has a 8mm thick, 40cm gusset support at standard height of 1.4m. All fasteners to be of 304 stainless, Torx Anti Vandal Fasteners, All nuts enclosed in Polyamide Anti Vandal Caps.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	01-12-2024	Due Date Extended for tenders closing on 30-11-2024.	Admin Corrigendum Date Extend	03-12-2024

Refer document

INR 100900.0 /-

INR 50.45 Lakhs /-