Construction Work Of 05 Seater Public Toilet Under Municipal Corporation Limits. Number - 4 - Earth work excavation in ordinary soil for foundation including lead upto 30.00m and lift upto 2 Providing and laying in cement concrete 1:4:8 with cement, fine sand and 40mm stone ballast and curing complete 3 Providing and laying in Septic tank with cement concrete 1:2:4 cement, coarse sand and 20mm stone ballast including all complete for proper completion of the work. Sl No.279(b) 4 M150 brick work in 1:6 cement and coarse sand mortar in foundation upto plinth level including in all complete Sl No. 5 Local Sand filling ……….... including all comlete. 6 RCC work 1:1.5:3 Providing and laying in position specified grade of reinforced cement concrete in Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level in : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). PWD 5.1 7 Reinforced cement concrete 1:1.5:3 work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) PWD 5.2 ii) Above plinth level upto fifth floor lable 8 Reinforced cement concrete work in beams,lintels suspended floors, roofs having balconies, shelves, chajjas,bands, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering,shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). PWD 5.3 9 RCC work 1:1.5:3 Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shuttering, finishing and excluding reinforcement - Above plinth level upto fifth floor level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).PWD 5.1 10 Mild steel or iron work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work and including supply of steel St. No. 504 11 M150 brick work in 1:4 cement and coarse sand mortar in super structure including in all complete Sl No. 3058+309 12 M150 brick work in 1:4 cement and coarse sand mortar and brick work in thickness of wall 12cm or less in super structure including in all complete 13 M150 brick work in 1:4 cement and coarse sand mortar in parapet wall including in all complete Sl No. 305B+309+310a 14 Providing and laying 12 mm thick plaster with 1:4 cement and coarse sand mortar. Sl No. 13.4 15 Finishing walls with Putty approved brand and manufacture and of required shade on ndacorated curing and cost of all material, labour, T&P etc. required for proper completion of work. 16 Finishing walls with exterior emulsion paint (Apex) in Ceiling of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. 17 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominalsize) and curing complete, Including cost of form work. 18 Providing and laying Ceramic glazed tiles on walls of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. PWD 11.37 19 Providing and laying Vitrified tiles in floor with lean concrete of 600x600mm sizes (thickness 10mm), with a water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive 20 S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neatcement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete,on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). including preparation of 50mm thick base with concrete 1:4:8 Cement, Coarse sand and40 mm B/B complete as per E/I. PWD 11.2 21 Providing and fixing 18 mm thick Granite (gang saw cut) mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Slab area above 0.50 Sq.M.) PWD 11.23A 22 Mild steel and iron work of small size and section such as holding down woods, hold fasts tierods, grating, etc. (When not included in and over all 23 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 24 Applying priming coat and paining 1 coat over new steel and other metal surface upto 10cm. In width or girth or small 25 Providing and laying aluminium framed door including all complete as per market rate 26 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type footrests. 27 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. 28 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 29 Providing and fixing size 630x450 mm wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls whereverrequire 30 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm 31 Supplying and fixing rolling shutters of approved make made of 8.25mm (3x18 gauge) cold rolled M.S. path inter locked through out their entire length and joined together at the end by end locksand mounted on specially designed pipe 32 Providing and fixing 27.52 cm long wire spring grade 2 for rolling shutters. PWD 521 33 Providing and fixing top cover for rolling shutters made of 18 gauge M.S. sheet. PWD 522 34 Providing and fixing ball bearing for rolling shutters. PWD 523 35 Written proforma of Ladies, Gents and Sauchalay/Bathroom including all complete. Market Rate 36 Providing and fixing Stainless Steel grating of 100 mm dia approved quality and colour. 37 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, ( for payment purpose only weight of stainless steel members shallbe considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 38 Providing and laying soap stand including all complete. 39 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931. 40 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not lessthan 690 gms. 41 Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make. 42 Providing and fixing on wall face unplasticised Rigid PVC 110 mm dia meterrain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 43 Providingand fixing polyethelene- alluminium- polyethelene (PE-ALPE) composite pressure pipes confirming to IS -15450, U.V. stablized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80 degree C, including all special fittings of composite material (engineering plasting blend and brass inserts whereverrequired) e.g. elbows,tees, reducers, couplers & connectors etc. , with clamps at 1.00 meter spacing. This includes the cost of cutting chases andincluding testing of joints complete as per direction of the engineer in charge.(PWD schedule specification no. 18.2.1 and18.2.3)Concealed work, including cutting chases and making good the wall etc.1216 (16 mm OD) pipe 44 Providingand fixing polyethelene- alluminium- polyethelene (PE-ALPE) composite pressure pipes confirming to IS -15450, U.V. stablized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80 degree C, including all special fittings of composite material (engineering plasting blend and brass inserts whereverrequired) e.g. elbows,tees, reducers, couplers & connectors etc. , with clamps at 1.00 meter spacing. This includes the cost of cutting chases andincluding testing of joints complete as per direction of the engineer in charge.(PWD schedule specification no. 18.2.1 and18.2.3)Concealed work, including cutting chases and making good the wall etc.2025 (25 mm OD) pipe 45 Providing and fixing hanger including all complete. 46 Providing and fixing towel rod including all complete. 47 Providing and fixing towel ring including all….complete. 48 P/F of alluminium framed jali ventilation all complete. 49 Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded water tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. 50 Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded water tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tankshould be ISI marked, Sintex or equivalent. 51 Wiring point for light with 1.5 sq.mm. PVC insulated single core aluminium conductor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 8 SWG Gl earth continuity wire,GP Box , piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed, including matching colour washSame as in above but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside. (PWD shedule item 138C) 52 Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash, Same as in item above but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. (PWD shedule item no. 140C) 53 Wiring point for plug with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash. same in item 141(B) but in PVC conduit with 1.5 mm.FRLSH PVC insulated multistrand Copper nductor cable earthwire drawn inside the nduit. (PWD shedule Item no. 141 C) 54 Supply and fixing of power plug with 15A/250 volt flush type switch and S pin 15A/250V flush type universal socket in suitable M.S. box of 175mmX100mmX 50mm size with phenolic laminated 3mm thick fixed with brass bakelite sheet machine screw and cup washer. (PWD shedule item no. 1139) 55 Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semishuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round Zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. (PWD shedule item 1149) 56 Supply and fixing concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. (PWD shedule item no. 1149A) 57 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. (PWD schedule item 1009 ) 58 Supply and fixing of electronic fan regulator 120280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. (PWD schedule item no. 1203A ) 59 Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect (PWD schedule item no. 1413) CAT-AA 60 Supply & fixing of 1200mm ceiling fan with 2 no.s canopy and 1 no.s rubber hook including down rod as per requirement, not- bolt, washer, spring washer, 3 nos. Of wire angled blades etc. Complete. 61 Supply , fixing, testing 10 Watt LED down concealing light with electronic driver. 62 Providing and laying ACP sheet including all comlete as per market rate. 63 S/F Hand driver ……………....all complete. 64 S/F Feed back machine ……………....allcomplete. 65 Add 18 % G.S.T
