|
| 1 | INSTRUMENTATION ACCELEROGRAPH,COMPUTER,BOAT,D.G.SET |
| 2 | Supply and fixing of strong motion accelograph with +_ full scale range (1g offset in vertical due gravity ) 64 GB SD card storage memory installation kit( anchor threaded rod nut anchor setting tool) with all cost of material labour T&P etc complete with maintainence upto one year. |
| 3 | Supply and fixing of HP PC core i3 8 GB RAM 256 SSD /20 inch LED /win 11 with all cost of material labour T&P etc complete with maintainence upto one year. |
| 4 | Supply of 8 seater flyer boat with 40 HP 2 stroke tiller YAMAHA engine with all cost of material labour T&P etc complete with maintainence upto one year. |
| 5 | Supply and fixing of DG set 10 KVA -1 Phase genset company sunrise Silent self start ,auto stop including batterywith all cost of material labour T&P etc complete with maintainence upto one year. |
| 6 | DAM U/S WORKS (PITCHING ETC) |
| 7 | Dismantling of old pitching U/S Slope of Dam including stacking all labour t&p etc complete. |
| 8 | Supplyingand Layingfilter material (coarse sand)below Boulder pitching in u/s slope of dami/c cost of all material, labour, T&P etc. |
| 9 | Supplyingand Laying filter material (Shingle size 12-20) mm below Boulder pitching in u/s slope of dami/c cost of all material, labour, T&P etc. |
| 10 | Laying old boulder pitching 20 to 40 kg. boulder in u/s slope of dam i/c cost of labour and T&P etc. |
| 11 | Supplying and laying New boulder pitching 40 to 60 kg. boulder in u/s slope of dam i/c cost of labour and T&P etc. |
| 12 | DAM U/S CHUTE DRAIN SHUTES WORKS |
| 13 | Supplying and laying New boulder pitching 20 to 40 kg. boulder in u/s Chute Drain i/c cost of labour and T&P etc. |
| 14 | C.C. 1:2:4 i/c cost of all material, labour, T&P etc. |
| 15 | DAM D/SSLOPE CORRECTION |
| 16 | Earth work in excavation including rammingdressing the surface to the required levels and slopes and also including 1.5 M lift and 30 M lead ,the earth from cutting to be used in making embankment or to be deposited as spoil bank as directed by engineer incharge. |
| 17 | Earth work in clay core including all lift & lead upto 5.00 km and earth work in embankment in core area to be in 20 cm layers i/c ramming & dressing the surface including mechanical compaction as directed by Engineer in charge . |
| 18 | Earth work in embankmentincluding required lead and lift as per site including dressing making profiles and including mechanical compaction as directed by engineer incharge. |
| 19 | Earth work in back filling in core excavated area,D/S Outer slopeof Baigul Dam from extra excavated earth with initial lead and lift i/c cost of labour T&P and ramming & dressing as directed by engineer incharge. |
| 20 | SEEPAGE DRAIN RESTORATION ETC. WORK |
| 21 | Dismantlingold pitching in seepage Drain including stacking all labour t&p etc complete. |
| 22 | Supplyingand Layingfilter material (coarse sand) below boulder pitching in Seepage Drainof baigul Damincluding all cost ofmaterial, labourT & P etc. |
| 23 | Supplyingand Laying filter material (Shingle size 12-20) mm below Boulder pitching in seepage Drain i/c cost of all material, labour, T&P etc. |
| 24 | Laying Shingle below Boulder pitching in seepage Drain i/c cost of all material, labour, T&P etc. |
| 25 | Relaying old boulder pitching 20 to 40 kg. boulder in seepage Draini/c cost of labour and T&P etc. |
| 26 | Supplying and laying New boulder pitching 20 to 40 kg. boulder inseepage Draini/c cost of labour and T&P etc. |
| 27 | P.R.WELL AND P.O.PREPLACING ETC WORK |
| 28 | Construction of Pressure Relief Wells (P.R.W)/No |
| 29 | Restoration of Pressure Observation Pipe (P.O.P)/No |
| 30 | Light ARRANGEMENT |
| 31 | Supplying and fixing of Solar Street Light Light : 15 wattag, Battery : 12.8 v 18Ah Life po4(BIS APPORVED), Solar Pannel : 12 V/75 wattage poly solar pv module (MNRE), Pole : GI 6 meter + weight(24kg approx) with foundation nut, bolt plate, Wire : Copper 2 core , Input Voltage :12v DC , output:15 wp ,lumen :140/watt ,Led Life : 50000 HRS, Led Make : Osram, Operation : Automatic Dusk to Down, Body Type : High Pressure Aluminum DI cost, Solar Charge Controler : MPPT (In Built) ) with all cost of material labour T & P etc complete with maintainence up to one year |
| 32 | PERMANENT BENCH MARK |
| 33 | Earth work in foundation in dry ordinary soil (loam clay or sand) including lift up to 1.5 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-incharge up to a distance of 30M from the foundation trenches:(Building) |
| 34 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. |
| 35 | R.C.C. work with cement approved coarse sand and 2cm (3/4\")gauge approved stone ballast in the proportion of 1:2:4 excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc.required for proper completion of the work. Binding wire cost being included in the item. |
| 36 | Painting & printing signboard including cost of material, labour, T&P etc complete. |
| 37 | RESTORATION OF SPILLWAY D/S LAUNCHING APRON |
| 38 | Supplying and Dumping of newboulder 40-60 Kg. in wt.in Launching apron including Cost of material,labour,T&P |
| 39 | Laying packing new boulder 20-40 Kg.wt.in with G.I.wire size (3.0x1.5x1.0)m SWG8 S.W.G crate in Launching apron includingmaterial,labour,T&P etc |
| 40 | CONSTRUCTION OF PARAPET WALL |
| 41 | Earth work in excavation foundation for parapet wall between KM. 6.800 to KM. 10.800 deduct for spillway - 50 m |
| 42 | C:C 1:4:8 in parapet foundation including cost of material and labour |
| 43 | Ist class brick work in parapet wallin 1:4 C.M. including cost of material and labour |
| 44 | Centring and shuttering of c.c work on top of parapet wall |
| 45 | C:C 1:2:4 in parapetincluding cost of material and labour on top of parapet wall |
| 46 | 12.50 mm thick cement plaster in 1:4 C.M.including cost of material and labour |
| 47 | Finishing walls with water proofing cement paint of approved make such as super snowcem,Durrocem,Robiacem Guttucem,supreme quality of required shade on uncoated wall surface/M² |
| 48 | FIXING OF V -NOTCHESFOR MEASURINGOF SEEPAGE |
| 49 | Earth work in excavation/Digging in kankar soil with stacking ,lead and liftin foundation including lift up to 1.5 meter and lead up to 30 meter and including back filling, and allT&P etc complete. |
| 50 | C:C 1:4:8 in foundation i/c cost of all material, labour, T&P etc. |
| 51 | Ist class brick work in 1:4 C.M. i/c cost of all material, labour, T&P etc. |
| 52 | 12.5 mm thick cement plaster in 1:4 CM. i/c cost of all material, labour, T&P etc.(for parapet wall) |
| 53 | Finishing walls with water proofing cement paint of approved make such as super Snowcem,Durrocem,Robiacem Guttucem, supremequality of required shade on uncoated wall surface (one coat) over one coat white cement primer to give even shades after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials inciuding curing and cost of all materials. |
| 54 | Supplying Cost ofV-Notch (Size 60 C.M.) |
| 55 | BRICK ON EDGE ON DAM TOP |
| 56 | supplying andlaying Brick on edge on top road of bund of Dam i/c cost of material, loading,unloading, stacking & carriage upto site withlabour T&P etc. |
| 57 | CONSTRUCTION OF SIDE DRAIN |
| 58 | C:C 1:4:8 in Side drain foundation i/c cost of all material, labour, T&P etc. |
| 59 | C.C. 1:2:4in side drain i/c cost of all material, labour, T&P etc.(for side drain) |
| 60 | JUNGLE CLEARANCE |
| 61 | Cleaning thick bushes and thorny jungle without uprooting and its disposal |
| 62 | CONSTRUCTIONOF CONTROL CABIN |
| 63 | Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60M as per direction of Engineer-in-charge . |
| 64 | Dismantling roof of A.C./ G.C. sheet including cost of all labour, T&P etc . |
| 65 | Earth work in foundation in dry ordinary soilincluding lift up to 1.5 meter and lead up to 30 meter and including back filling, and allT&P etc complete. |
| 66 | Earth work in filling by power tranported earth with a lead beyond 200m. and upto 1.00 Km. including excavation, loading, unloading, manual compaction, dressing and all lifts complete. |
| 67 | C.C 1:3:6 including cost of all material, labour, T&P etc complete. |
| 68 | C.C. 1:2:4 including cost of all material, labour, T&P etc complete. |
| 69 | Bending, binding, cutting and placing of reinforcement including cost of binding wire but excluding cost of steel. |
| 70 | Centering and shuttering of C.C. work including rent of shuttering material, labour and T&P required for proper completion of work for slab, lintels, sun shades, columns & walls etc. |
| 71 | Ist class brick work in 1:4in cement mortarincluding all cost ofmaterial, labour, T&P etc. |
| 72 | Cement plaster in 1:4 Cement coarse sand mortar including all cost ofmaterial, labour, T&P etc. |
| 73 | Providing and fixing iron work for doors windows choukhat work including all cost ofmaterial, labour, T&P etc. |
| 74 | Supplying and fixing 35 mm thick offlush door commercial quality conforming to IS: 2202 part I (1983)including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fittings with meceseary screws to be supply departmentally . |
| 75 | Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S wire Gauze of aperture 1.4 mm with wire of dia 0.63 mm for door window and clerestory windows including ISI marked bright finished or/and black enamelled MS.butt hinges with necessary scruws. |
| 76 | Providing and fixing 6 mm china white glazed in flooring are skirting dado laid with 1:3Cement coarse sand mortarfinished white cement slurry jointing and polishing complete including all cost ofmaterial, labour, T&P etc. |
| 77 | Providing and laying vertified floor tiles in differentsize (thick to be specified by the manufacture)with water absorption\"s less than 0.08% and conforming to I:S15622 of approved make in all colours and shades laid on 20 mm thick cement mortor 1:4 including grouting the joints with white cement and matching pigment etc. including all cost of material labour,T&P etc. complete. |
| 78 | Finishing walls with water proofing cement paint of approved make such as super Snowcem,Durrocem,Robiacem Guttucem, superme quality of required shade on uncoated wall surface (one coat) over one coat white cement primer to give even shades after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials inciuding curing and cost of all materials. |
| 79 | Oil bond distempering two coat approved brand and manufacture and of required shade including all cost ofmaterial, labour, T&P etc.. |
| 80 | Enamel Painting two coats of approved brand and manufacture and required shade for steel work including all cost ofmaterial, labour, T&P etc. |
| 81 | Supply and fixing of 10 cm internal dia P.V.C pipe complete with bends with door at top and plain at bottom and grating and including supply of necessary M.S.clamps 2.5 cm x 3 mm fixed to walls with and including supply of 15cm long 6mm dia nails all material labour and T&P etc required for completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipe. |
| 82 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mmwith automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.4.1 One urinal |
| 83 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :17.10.1 Kitchen sink with drain board:510x1040 mm bowl depth 250 mm each. |
| 84 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms. |
| 85 | Providing and fixing white vitreous china wash basin size 550x400mm |
| 86 | Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge .Concealed work including cutting chases and making good the walls etc. (i)-25mm nominal bore |
| 87 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 88 | Providing and fixing water closet sqatting pan (indian type W.C. pan) with 100mm sand cast iron P or strap, 10 litre low level white P.V.C. FLUSHING,cistern with manual controlled device (handle lever) conforming to IS :7231, with all fittings and fixtures complete including cutting and making good the walls and floors whereever required:White Vitreous china Orissa pattern W.c pan of size 580x440mm with integeral type foot rests. |
| 89 | Providing and fixing P.V.C waste pipe for shink or wash bashin including P.V.C waste pipe fitting complete. 40MM dia (Flexible pipe) |
| 90 | Providing and placing on terrace (at all floor levels) polyethyelene water storage tank ISI:12701 marked with cover and suitable locking arrangment and making necessary holes for inlet out let and overflow pipes but without fittings and the base support for tank |
| 91 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 92 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall,complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holderon 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. |
| 93 | Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch &ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash. |
| 94 | Wiring point for plug with 1.5 sq. mm. PVC insulated single core aluminium conductor cable in pvc conduit pipe concealed in the wall, complete with 8 SWG GI earth continuity wire, piano type switch and socket etc. complete in all respect including matching colour wash. |
| 95 | Wiring point for exhaust fan with 1.5 sq. mm. PVC insulated single core aluminium conductor cable in pvc conduit pipe concealed in the wall, complete with 8 SWG GI earth continuity wire GP Box , and 15 A piano type switch & ceiling rose on 3 mm thick phenolic laminated sheet etc complete in all respects including matching colour wash. |
| 96 | Supply and fixing and concealing of 25mm dia. 2mm thick pvc conduit pipe in the wall including cutting of brick work, laying of conduit and fixing it with M.S. hooks and then plastering with cement, sand mortar finished to the level, with matching colour wash including cost of proper threading of the conduit & providing necessary socket, bends and chuck nuts and as directed by the Engineer in charge with the supply of all material labour and T&P required for proper completion of work |
| 97 | Supply and fixing of 2/3/4 ways round PVC conduit confirming to IS for 25mm dia concealed in wall, keeping its level upto plaster duly provided with proper size cover, screwed as directed at site by the Engineer I/C with supply of all material labour and T&P required for proper completion of work |
| 98 | Supply and fixing of switch box 150 x 150 x 65mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge |
| 99 | Same as in item No 15.36but of but size 175 x 100 x 65mm size |
| 100 | Same as in item No 15.36but of but size 200 x 250 x 65mm size |
| 101 | Same as in item No 15.36but of but size 250 x 250 x 65mm size |
| 102 | Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sqm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete,including supply of all material, labour and T & P etc. required forproper completion of the work as directed by Engineer in charge. |
| 103 | Same as in item 15.40but with 2 nos. 6 sq mm and 1 no 4sq mm FRLSH PVC insulated copper conductor cable. |
| 104 | S&F of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve CAT B |
| 105 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve |
| 106 | S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. |
| 107 | Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. |
| 108 | Add for light / fan points with modular type switch in place of piano type switch. |
| 109 | Add for plug point with modular switch & socket in place of piano type switch & socket |
| 110 | Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work |
| 111 | Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect |
| 112 | Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost ofG.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alroundetc. complete in all respect. |
| 113 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. |
| 114 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc.required for proper completion of work. |
| 115 | SUPPLYING AND FIXING9 WATT Led Bulb |
| 116 | SUPPLYING AND FIXING15 WATT Led Bulb |
| 117 | SUPPLYING AND FIXING30 WATT Led Bulb |
| 118 | SUPPLYING AND FIXING 25 WATT Led Tube |
| 119 | SUPPLYING AND FIXING Mini Jet 1 H.P |
| 120 | SUPPLYING AND FIXINGCeiling Fan( 56\") |
| 121 | Repairing of Staff Quarters |
| 122 | 1st class Brick work in 1:4 cement and coarse sandmortar including cost of all material, labour, T & P etc. |
| 123 | Supply and layingeucalyptus ballies to support for roof including cost of material T&P labour completed. Dia (10-15)cm and 5.5 m long . |
| 124 | Supply and fixing galvanized corrugated iron sheet roofing 24 B.W.G. in position including supply of all material ,labour ,tools , and plants etc required for proper completion of the work and including wastage. |
| 125 | 12.5 mm thick plaster (1:6) with cement ,coarse sand including cost of all material, labour, T & P etc. |
| 126 | 2.5 cm thick (1\") 1:2:4 plain cement concrete floor with cement ,approved coarse sand and 2 cm graded approved stone shingle laid in plain finished with 3mm (1/8\") floating of neat cement and marble dust in 5:1 as specified over & excluding 8cm thick base concrete consisting of cement ,local sand and brick ballast 4cm gauge in proportion 1:4:8 and removing any over lapping mortar at joints of panels if any and giving them a uniform finish including supply all materials ,labour and t&p etc.required for proper completion of the work. |
| 127 | Supply and fixing flush doorscommercial quality confirming to IS 2002part I (1983) including fixing of wooden cleats and stopper and including fixing and adjustment of hinges bolts locks handlessprings fitting with necessary screws to be supplied departmently. |
| 128 | Mild steel or iron work of small size and sections such as holdings down bolts ,hold fast ,tie road ,gratigs etc (when not include in an over all rates)wough or required form, include of supply of steel ,bolt nuts and wastage etc and its fixing required for proper completion of work. fabrication of door and window frame including cost of hinges. |
| 129 | Providing and fixing 1 mm thick MS Sheet Garrage door with frame of 40x40x6mm angle iron,3.15mm 1/8\"\" thick MS gusset plate at the junction and corners,including supply and fixing of necessary fittings ,lock rail of 37.5cm length of oxidised iron and including pintels ,hooks at the top and applyingprimer coat of red lead paint on all sides complete. |
| 130 | Finishing wall with two coat of water proof cement paint of approved quality of periously old treated surface with the paint an even shade including supply of all materialold surface also including labour, T & P etc.complete. |
| 131 | Distempering in two coat with oil bond distemper of approved and manufacture and of required shade on under coated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacture such as Berger ,J&N , Shalimar ,Asian paints throughly brushing the surface free from mortor dropping and other foreign matters and also including preparing the surface even also sand prepared smoothwith cost of all material labour T&P including scrapping of old surface all work complete. |
| 132 | Painting two coat on old surface of wood or steel and other surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and otherforeign matterssand preparing and strippingincluding cost of all material labour T&P etc required for the proper completion of the work |
