}

Supply Installation Testing And Commissioning Of Submersible Pump Sets With All Allied Work Electrical And Mechanical Equipment For Various Rebore Borewells At Matia Mahal Area Under Ac-21, Delhi-Delhi

Delhi Jal Board has published Supply Installation Testing And Commissioning Of Submersible Pump Sets With All Allied Work Electrical And Mechanical Equipment For Various Rebore Borewells At Matia Mahal Area Under Ac-21. Submission Date for this Tender is 28-11-2024. Submersible Pump Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

46309814
Supply Installation Testing And Commissioning Of Submersible Pump Sets With All Allied Work Electrical And Mechanical Equipment For Various Rebore Borewells At Matia Mahal Area Under Ac-21
Open Tender
Indian
Delhi
Delhi
28-11-2024

Tender Details

supply installation testing and commissioning Of Submersible Pump Sets With All Allied Work electrical and mechanical Equipment For Various Rebore Borewells At Matia Mahal Area Under Ac-21- 1 Name of Sites:- T/w Rang Mahal, T/w Bulbuli Khana, T/w Gali Patte Wali, T/w Hauz Wali Masjid, T/w Mohalla Nihariyan, T/w Jangli Kaun, T/w Gali Sawar Khan & T/w Katra Sohan Lal.Supply of submersible pump set fitted with dynamical balanced EP impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM, suitable for operation on 3 ph, 415+5% Volts, 50Hz, AC power supply having, motor power : 5 HP stage : 25-30, pump head range: 40-100 mtr, Discharges range: 170-120 LPM, Outlet size:40mm, suitable for 100mm bore size. Make: BS/SU/DJB Approved Make 2 Supply of Hut Type Feeder Piller Automatic LT Panel board having suitable Space for electric energy meter for 415 Volts, 3 phase, 50Hz, 4 wire system for operation of up to 7.5 HP submersible set, made out of not less than 2mm thick CRCA for load bearing members, and 1.6mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. The panel size 760mmX1360X300mm/ or suitable size as per site requirement or space availbility and having (1) 63 Amp 4 pole MCB 10 KA breaking capacity-1 No. (2) digital volt meter (0-400) 1 no. (3) digital Ammeter (0-50A) 1 no (4) Phase sequence relay- 1No (5) Electronic timer 1 no (6) Voltmeter Selector switch- Ino (7) Auto Manual Selector Switch,1 no (8) Start/Stop Push Button- 2 No (9) 32 Amp Contactor -2 No (10) Auto/Manual switch, 2- position selector-switch, centre OFF with NO +NC Block Make : L&T/C&S/minilac (11) Set of indicating lamps LED-Type, operational-voltage up tp 240 V (3No) (12) Time-Switch digital (1 No) (13) Motor Protection Relay-1 No (14) Aluminum Bus bar size 25 mmx6mm-1 set. (15) CT-3Nos (16)Over load Relay 14-23 Amps 1 No (17) QT Timer-24 Hours-1 No Make of accessories :- L&T/C&S/AE/as perDJB Approved 3 S/o 2.5 sqmm 3 Core PVC insulated flat submersible cable suitable for 1100 Volts Copper Conductor (100 mtrRoll). Make Havells/Gloster/DJB Approved Make 4 S/o G.I. pipe 40mm dia, Medium class with threaded externally on both ends 3 mtrs long, as per sample. Make of pipe: Jindal/Surya/Tata/DJB Approved Make. 5 S/o Tail piece of size 40mm dia 600mm long with both end threaded Make of Pipe Jindal/Surya/Tata/ISI/DJB Approved 6 S/o GI socket 40mm dia Medium class with threaded internally Make- Unik/ISI/DJB Approved Make 7 S/o Ms clamp for holding 50mm dia pipe 600mm long and 12.5 mm thick holding the pipe the complete with nut bolt and washer. 8 Supply of MS bore cover 8mm thick suitable for 200mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 50mm dia hole in the centre 9 Supply of canvas hose pipe 50mm dia 30 Mtr long. 10 S/o of GIelbow with both end having thread size-40mm make – Unik/ISI/DJB Approved 11 S/o of GI reducer having thread on both end Size-50mm to 40mm make – Unik/ISI/DJB Approved 12 S/o of GI union having thread on both end size-40mm make – Unik/ISI/DJB Approved 13 Installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, Grouting of electric panel digging and fixing the same with the help of CC and laying of GI pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E&M equipment on No load and full load conditions as per standard and full satisfaction of engineer-in-charge. This is a turnkey job and it futther includes any left out items which may be required during executin of work will be firm responsibility & no extra payment will be paid.

Key Value

Document Fees
INR 500 /-
EMD
INR 25000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail