Tender For 11 Kv Mes Feeder Jarjar Conductor Rabbit To Dog 18 Km Replacement , 9 11 Mtr 28 Nos St Pole Replacement, Lt Abc 3X95 Sq Mm Cable 1200 Mtr Replacement Tree Cutting - 11 Kv Mes Feederjarjar Conductor Rabbit To Dog & Tree Cutting Under S/S Dhoom M, Noida-Uttar Pradesh

TDR : 46307949

Tender Notice
BOQ

Expired

Noida , Uttar Pradesh

Tender Brief : Tender For 11 Kv Mes Feeder Jarjar Conductor Rabbit To Dog 18 Km Replacement , 9 11 Mtr 28 Nos St Pole Replacement, Lt Abc 3X95 Sq Mm Cable 1200 Mtr Replacement Tree Cutting - 11 Kv Mes Feederjarjar Conductor Rabbit To Dog & Tree Cutting Under S/S Dhoom M

Document Fees
₹ 3540 /-

EMD
₹ 24000.0 /-

Tender Value
Refer document

Submission Date
27-11-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	11 KV MES FeederJarjar Conductor Rabbit To Dog & Tree Cutting Under S/S Dhoom Manikpur
2	Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 3 to 16
3	ST POLE 11MTR
4	PCC POLE 8.5MTR
5	STONE PAD
6	11KV XLPE 3X185
7	11KV O/D KIT
8	LT AB CABLE 3X120
9	DOG CONDUCTOR
10	11KV CROSS ARM
11	11KV T OFF CHANNEL
12	11KV PIN INSULATIOR
13	11KV DISC INSULATOR
14	EARTHING COMPLETE
15	STAY SET COMPLETE
16	GUARDING ANGLE 65X65X6
17	Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.
18	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, \"E\" bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.Double Pole Structures(a)ST POLE 11MTR
19	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, \"F\" bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole(a) ST POLE 11 MTR AND PCC POLE 8.5MTR
20	Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming.Single Pole and Double Pole(a)ST POLE 11 MTR AND PCC POLE 8.5MTR
21	FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.
22	FIXING OF T OFF CHANNEL AS PER SITE REQUIREMENT.
23	FIXING OF CROSS ARM AS PER SITE REQUIREMENT.
24	FIXING OF STONE PAD AS PER SITE REQUIREMENT.
25	FIXING OF 11KV DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.
26	FIXING OF GUARDING ANGLES AS PER SITE REQUIREMENT
27	Supply of 160mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)
28	Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.
29	Laying ofHDPE Pipe PE-80, PN-4, DN-160mm dia by HDD trenchless method for 11KV, 3x185sq.mm XLPE cable as per site requirement. (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.)
30	Laying and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. in HDPE Pipe dia after digging HDD trenchless methodboring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work.as per site requirement.
31	Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor)
32	Laying, Sagging, connecting, Re-sagging of overhead 11 KV 3X185 Sq.mm XLPE Cablemaking connection complete at both ends as per site requirement.
33	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
34	Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600600300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)
35	Laying, spreading, lifting and final sagging of 3 OR 4phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos OR 04 Nos. Conductor in parallel as per site requirement.
36	Laying, spreading, lifting and final sagging of AB Cable 3x120sqmm in accordance with Line chart includidng binding and fixing of all accessories as per site requirement.
37	Fixing, tightening & nozzling of stay set with wire and stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps and Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.
38	PROVIDING AND FIXING OF HOLDING CLAMP AS PER REQUIREMENT.
39	PROVIDING AND FIXING OF EYE BOLTS AS PER REQUIREMENT.
40	PROVIDING AND FIXING OFNUT BOLT AND WASHERS AS PER REQUIREMENT
41	PROVIDING AND FIXING OFPG CLAMP (DOG TO DOG) AS PER REQUIREMENT
42	PROVIDING AND FIXING OF11KV F BRACKETAS PER REQUIREMENT
43	Providing and Fixing of GI Wire 4&8 SWG 1/5mm as per site requirement.
44	Road Cutting and Road Restoration Charges for the above work.
45	TREE CHOPPING AND CUTTING IN THE WAY OF LINE BY BOOM BARRIER MACHINE.
46	Removal and Dismentaling of old and used Conductor from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
47	Removal and Dismentaling of old and Damaged PCC Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
48	Removal and Dismentaling of old and Damaged ST Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
49	Removal and Dismentaling of old and Damaged Cross Arm from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
50	RE-ARRANGEMENT OF DAMAGED CONDUCTOR AT KRISHNA FLOOR MILL
51	Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 52 TO 63
52	11KV XLPE 3X185
53	11KV O/D KIT
54	11KVI/D KIT
55	11KV TOP CHANNEL
56	11KV DROPPER CHANNEL
57	DOG CONDUCTOR
58	ST POLE 11MTR
59	11KV PIN INSULATIOR
60	11KV DISC INSULATOR
61	11KV CROSS ARM
62	EARTHING COMPLETE
63	STAY SET COMPLETE
64	Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.
65	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, \"E\" bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.Double Pole Structures(a)ST POLE 11MTR
66	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, \"F\" bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole(a) ST POLE 11 MTR AND PCC POLE 8.5MTR
67	Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming.Single Pole and Double Pole(a)ST POLE 11 MTR AND PCC POLE 8.5MTR
68	FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.
69	FIXING OF TOP CHANNEL AS PER SITE REQUIREMENT.
70	FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.
71	FIXING OF 11KV DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.
72	FIXING OF CROSS ARM AS PER SITE REQUIREMENT
73	Supply of 160mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)
74	Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.
75	Laying ofHDPE Pipe PE-80, PN-4, DN-160mm dia by HDD trenchless method for 11KV, 3x185sq.mm XLPE cable as per site requirement. (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.)
76	Laying and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. in HDPE Pipe dia after digging HDD trenchless methodboring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work.as per site requirement.
77	Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor)
78	Laying, Sagging, connecting, Re-sagging of overhead 11 KV 3X185 Sq.mm XLPE Cablemaking connection complete at both ends as per site requirement.
79	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
80	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable Inddoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
81	Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600600300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)
82	Laying, spreading, lifting and final sagging of 3 OR 4phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos OR 04 Nos. Conductor in parallel as per site requirement.
83	Fixing, tightening & nozzling of stay set with wire and stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps and Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.
84	PROVIDING AND FIXING OF HOLDING CLAMP AS PER REQUIREMENT.
85	PROVIDING AND FIXING OFNUT BOLT AND WASHERS AS PER REQUIREMENT
86	PROVIDING AND FIXING OFPG CLAMP (DOG TO DOG) AS PER REQUIREMENT
87	PROVIDING AND FIXING OFISI MARKED GI PIPE 6\" DIA AS PER REQUIREMENT
88	Providing and Fixing of F BRACKET as per site requirement.
89	Road Cutting and Road Restoration Charges for the above work.
90	TREE CHOPPING AND CUTTING IN THE WAY OF LINE BY BOOM BARRIER MACHINE.
91	Removal and Dismentaling of old and used Conductor from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
92	Removal and Dismentaling of old and Damaged PCC Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
93	Removal and Dismentaling of old and Damaged ST Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
94	Removal and Dismentaling of old and Damaged Cross Arm from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
95	U/G CROSSING FOR 11KV CLAVE CONE MES
96	Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 97 TO 104
97	11KV XLPE 3X185 cable
98	ST POLE 11MTR
99	STONE PAD
100	11KV DISC INSULATOR
101	11KV O/D KIT
102	EARTHING COMPLETE
103	TOP CHANNEL
104	DROPPER CHANNEL
105	Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.
106	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, \"E\" bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.Double Pole Structures(a)ST POLE 11MTR
107	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, \"F\" bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole(a) ST POLE 11 MTR AND PCC POLE 8.5MTR
108	Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming.Single Pole and Double Pole(a)ST POLE 11 MTR AND PCC POLE 8.5MTR
109	FIXING OF TOP CHANNEL AS PER SITE REQUIREMENT.
110	FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.
111	FIXING OF 11KV DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.
112	FIXING OF 11KV STONE PAD AS PER SITE REQUIREMENT.
113	Supply of 160mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)
114	Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.
115	Laying ofHDPE Pipe PE-80, PN-4, DN-160mm dia by HDD trenchless method for 11KV, 3x185sq.mm XLPE cable as per site requirement. (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.)
116	Laying and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. in HDPE Pipe dia after digging HDD trenchless methodboring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work.as per site requirement.
117	Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor)
118	Laying, Sagging, connecting, Re-sagging of overhead 11 KV 3X185 Sq.mm XLPE Cable making connection complete at both ends as per site requirement.
119	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
120	Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600600300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)
121	PROVIDING AND FIXING OF HOLDING CLAMP AS PER REQUIREMENT.
122	PROVIDING AND FIXING OFISI MARKED GI PIPE 6\" DIA AS PER REQUIREMENT
123	Road Cutting and Road Restoration Charges for the above work.
124	TREE CHOPPING AND CUTTING IN THE WAY OF LINE BY BOOM BARRIER MACHINE.

Need a Bussiness Loan? Apply Now!

Buy Digital Signature

Bidding Support

Tell us about your Product / Services,
We will Find Tenders for you

Company Name *

Your Mobile / Phone *

Email *

Enter Your Product / Services, *

(e.g.: Civil Work, House Keeping, Software Development, Office Furniture).

Enter OTP*

Also Visit

Tenders

Uttar Pradesh Tenders

Agricultural Product and Services Tenders

Floriculture and Silviculture Tenders

Tree Cutting Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Get Tender Document / Notice

Phone*

OTP Verification

OTP has been sent to Mobile

Verify OTP*
180 Seconds

There might be some delay in receiving the OTP due to heavy traffic

Top

Tender For 11 Kv Mes Feeder Jarjar Conductor Rabbit To Dog 18 Km Replacement , 9 11 Mtr 28 Nos St Pole Replacement, Lt Abc 3X95 Sq Mm Cable 1200 Mtr Replacement Tree Cutting - 11 Kv Mes Feederjarjar Conductor Rabbit To Dog & Tree Cutting Under S/S Dhoom M, Noida-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	11 KV MES FeederJarjar Conductor Rabbit To Dog & Tree Cutting Under S/S Dhoom Manikpur
2	Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 3 to 16
3	ST POLE 11MTR
4	PCC POLE 8.5MTR
5	STONE PAD
6	11KV XLPE 3X185
7	11KV O/D KIT
8	LT AB CABLE 3X120
9	DOG CONDUCTOR
10	11KV CROSS ARM
11	11KV T OFF CHANNEL
12	11KV PIN INSULATIOR
13	11KV DISC INSULATOR
14	EARTHING COMPLETE
15	STAY SET COMPLETE
16	GUARDING ANGLE 65X65X6
17	Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.
18	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, \"E\" bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.Double Pole Structures(a)ST POLE 11MTR
19	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, \"F\" bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole(a) ST POLE 11 MTR AND PCC POLE 8.5MTR
20	Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming.Single Pole and Double Pole(a)ST POLE 11 MTR AND PCC POLE 8.5MTR
21	FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.
22	FIXING OF T OFF CHANNEL AS PER SITE REQUIREMENT.
23	FIXING OF CROSS ARM AS PER SITE REQUIREMENT.
24	FIXING OF STONE PAD AS PER SITE REQUIREMENT.
25	FIXING OF 11KV DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.
26	FIXING OF GUARDING ANGLES AS PER SITE REQUIREMENT
27	Supply of 160mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)
28	Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.
29	Laying ofHDPE Pipe PE-80, PN-4, DN-160mm dia by HDD trenchless method for 11KV, 3x185sq.mm XLPE cable as per site requirement. (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.)
30	Laying and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. in HDPE Pipe dia after digging HDD trenchless methodboring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work.as per site requirement.
31	Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor)
32	Laying, Sagging, connecting, Re-sagging of overhead 11 KV 3X185 Sq.mm XLPE Cablemaking connection complete at both ends as per site requirement.
33	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
34	Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600600300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)
35	Laying, spreading, lifting and final sagging of 3 OR 4phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos OR 04 Nos. Conductor in parallel as per site requirement.
36	Laying, spreading, lifting and final sagging of AB Cable 3x120sqmm in accordance with Line chart includidng binding and fixing of all accessories as per site requirement.
37	Fixing, tightening & nozzling of stay set with wire and stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps and Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.
38	PROVIDING AND FIXING OF HOLDING CLAMP AS PER REQUIREMENT.
39	PROVIDING AND FIXING OF EYE BOLTS AS PER REQUIREMENT.
40	PROVIDING AND FIXING OFNUT BOLT AND WASHERS AS PER REQUIREMENT
41	PROVIDING AND FIXING OFPG CLAMP (DOG TO DOG) AS PER REQUIREMENT
42	PROVIDING AND FIXING OF11KV F BRACKETAS PER REQUIREMENT
43	Providing and Fixing of GI Wire 4&8 SWG 1/5mm as per site requirement.
44	Road Cutting and Road Restoration Charges for the above work.
45	TREE CHOPPING AND CUTTING IN THE WAY OF LINE BY BOOM BARRIER MACHINE.
46	Removal and Dismentaling of old and used Conductor from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
47	Removal and Dismentaling of old and Damaged PCC Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
48	Removal and Dismentaling of old and Damaged ST Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
49	Removal and Dismentaling of old and Damaged Cross Arm from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
50	RE-ARRANGEMENT OF DAMAGED CONDUCTOR AT KRISHNA FLOOR MILL
51	Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 52 TO 63
52	11KV XLPE 3X185
53	11KV O/D KIT
54	11KVI/D KIT
55	11KV TOP CHANNEL
56	11KV DROPPER CHANNEL
57	DOG CONDUCTOR
58	ST POLE 11MTR
59	11KV PIN INSULATIOR
60	11KV DISC INSULATOR
61	11KV CROSS ARM
62	EARTHING COMPLETE
63	STAY SET COMPLETE
64	Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.
65	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, \"E\" bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.Double Pole Structures(a)ST POLE 11MTR
66	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, \"F\" bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole(a) ST POLE 11 MTR AND PCC POLE 8.5MTR
67	Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming.Single Pole and Double Pole(a)ST POLE 11 MTR AND PCC POLE 8.5MTR
68	FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.
69	FIXING OF TOP CHANNEL AS PER SITE REQUIREMENT.
70	FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.
71	FIXING OF 11KV DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.
72	FIXING OF CROSS ARM AS PER SITE REQUIREMENT
73	Supply of 160mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)
74	Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.
75	Laying ofHDPE Pipe PE-80, PN-4, DN-160mm dia by HDD trenchless method for 11KV, 3x185sq.mm XLPE cable as per site requirement. (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.)
76	Laying and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. in HDPE Pipe dia after digging HDD trenchless methodboring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work.as per site requirement.
77	Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor)
78	Laying, Sagging, connecting, Re-sagging of overhead 11 KV 3X185 Sq.mm XLPE Cablemaking connection complete at both ends as per site requirement.
79	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
80	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable Inddoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
81	Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600600300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)
82	Laying, spreading, lifting and final sagging of 3 OR 4phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos OR 04 Nos. Conductor in parallel as per site requirement.
83	Fixing, tightening & nozzling of stay set with wire and stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps and Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.
84	PROVIDING AND FIXING OF HOLDING CLAMP AS PER REQUIREMENT.
85	PROVIDING AND FIXING OFNUT BOLT AND WASHERS AS PER REQUIREMENT
86	PROVIDING AND FIXING OFPG CLAMP (DOG TO DOG) AS PER REQUIREMENT
87	PROVIDING AND FIXING OFISI MARKED GI PIPE 6\" DIA AS PER REQUIREMENT
88	Providing and Fixing of F BRACKET as per site requirement.
89	Road Cutting and Road Restoration Charges for the above work.
90	TREE CHOPPING AND CUTTING IN THE WAY OF LINE BY BOOM BARRIER MACHINE.
91	Removal and Dismentaling of old and used Conductor from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
92	Removal and Dismentaling of old and Damaged PCC Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
93	Removal and Dismentaling of old and Damaged ST Pole from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
94	Removal and Dismentaling of old and Damaged Cross Arm from the site and safe carriage of its from the site to any store of PVVNL DISCOM including loading and un-loading both ends.
95	U/G CROSSING FOR 11KV CLAVE CONE MES
96	Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 97 TO 104
97	11KV XLPE 3X185 cable
98	ST POLE 11MTR
99	STONE PAD
100	11KV DISC INSULATOR
101	11KV O/D KIT
102	EARTHING COMPLETE
103	TOP CHANNEL
104	DROPPER CHANNEL
105	Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO.
106	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, \"E\" bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.Double Pole Structures(a)ST POLE 11MTR
107	The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, \"F\" bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole(a) ST POLE 11 MTR AND PCC POLE 8.5MTR
108	Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming.Single Pole and Double Pole(a)ST POLE 11 MTR AND PCC POLE 8.5MTR
109	FIXING OF TOP CHANNEL AS PER SITE REQUIREMENT.
110	FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT.
111	FIXING OF 11KV DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.
112	FIXING OF 11KV STONE PAD AS PER SITE REQUIREMENT.
113	Supply of 160mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)
114	Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.
115	Laying ofHDPE Pipe PE-80, PN-4, DN-160mm dia by HDD trenchless method for 11KV, 3x185sq.mm XLPE cable as per site requirement. (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.)
116	Laying and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. in HDPE Pipe dia after digging HDD trenchless methodboring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work.as per site requirement.
117	Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor)
118	Laying, Sagging, connecting, Re-sagging of overhead 11 KV 3X185 Sq.mm XLPE Cable making connection complete at both ends as per site requirement.
119	Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.
120	Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600600300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)
121	PROVIDING AND FIXING OF HOLDING CLAMP AS PER REQUIREMENT.
122	PROVIDING AND FIXING OFISI MARKED GI PIPE 6\" DIA AS PER REQUIREMENT
123	Road Cutting and Road Restoration Charges for the above work.
124	TREE CHOPPING AND CUTTING IN THE WAY OF LINE BY BOOM BARRIER MACHINE.

Tender For 11 Kv Mes Feeder Jarjar Conductor Rabbit To Dog 18 Km Replacement , 9 11 Mtr 28 Nos St Pole Replacement, Lt Abc 3X95 Sq Mm Cable 1200 Mtr Replacement Tree Cutting - 11 Kv Mes Feederjarjar Conductor Rabbit To Dog & Tree Cutting Under S/S Dhoom M, Noida-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us